Parts Shop MAX ~High Mount InterCooler & Turbo Inlet~ IN STOCK Live quotes in thread! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DC Dan MAX USA · 08-05-2010, 01:11 PM

Its time for you to experience instant turbo response and unclutter that engine bay NOW because HMIC's are in stock again, this round is coming with extra sexy polished pipes - Check it out:
S13

S14-S15

*****UPDATE*****
We have a Greddy Intake Manifold cold pipe solution finalized
and it has been added to the shopping cart as an HMIC kit option!

Here is what the production version looks like that we are shipping now:

polished + one piece !

prototype install shots:

PURCHASES AND SHIPPING QUOTES DIRECTLY FROM THIS THREAD!
SIMPLY CLICK THE BLUE ADD TO CART LINK

VIEW CART

We have been doing custom drift spec intercoolers for a long time with fantastic results:

NOW: Parts Shop MAX is proud to bring you the first drift specific bolt on high mount intercooler in kit for SR and KA-T with T25 & T28 Bottom mounted turbos. This complete track proven HMIC kit delivers turbo response and reduction in temps that is second to none.

MAX S13-S14 SR & KA High Mount Intercooler for T25 & T28 Turbos $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! ***** We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately.

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW!

Key features of our drift specific High Mount Intercooler Kit:
~Mounts in front of the radiator, under the core support. Inlet and outlet shoot past the sides of the radiator.
~2.5"inlet and 2.75"outlet maintain proper velocity (3" pipes are too big for stock turbos)
~3.25" thick, extra wide core gives proper volume to the short height design
~Specifically designed for the bottom mount t25&t28 nissan turbos
~Extra short pipes for best response
~No BOV flange (we dont run them on our cars...TIG your choice of flange is optional)
~Allows better water cooling because it blocks less air from the radiator
~Mounts as far as possible away from front crash zone...and thieves...and cops
*Not compatible with pop up headlight motors and AC condenser
*Radiator support must be cut as shown in install photos

-Reinforced silicone couplers are available in Orange or Black.
S13 kit will have:
8x Stainless T-bolt clamps
2x 2.75" straight couplers
1x 2.5" straight coupler
1x 2"-2.5" step 90* coupler

S14 kit will have:
8x Stainless T-bolt clamps
2x 2.75" straight couplers
1x 2.5" straight coupler
1x 2"-2.5" step 45* coupler

MAX S14 High Mount Inter Cooler Kit $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! ***** We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately.

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW!

Track tested, seeing dramatically lower water temps, and instant boost response!

MAX S13 High Mount Inter Cooler Kit $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! ***** We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately.

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW!

installed

All intercooler kit options are available upon adding to cart for $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINEin stock NOW! ***** We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately.

Intercooler sold by itself for$250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW!

THE FOLLOWING ITEMS ARE SOLD SEPARATELY FROM THE HMIC KIT
(although they are a match made in heaven!)

I now have turbo inlets in stock for S15 T28 turbo ~ bottom mount ~ with Stock MAF or Z32 mass air flow meter Only $60!

Features:
~ 3 layer reinforced silicone couplers
~ Color choice of Black or Orange
~ Bead rolled Aluminum tube
~ Stainless steel hose clamps
~ Matches the Parts Shop MAX High Mount Intercooler (HMIC kit) perfectly!

Inlet pipe for T28 turbo with stock MAF available in black or orange: $60
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now!

Inlet pipe for T28 Turbo with Z32 MAF available in black or orange: $60
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now!

Install pictures

*****UPDATE*****

Inlet pipe for S13 T25 turbo is here !!!
Two versions are available, straight ($70) and curved ($80)
TIG welded and bead rolled aluminum tube with crank case breather fitting and 4 hose clamps
Comes with your choice of black or orange silicone couplers

Inlet pipe for T25 turbo with stock MAF available in black or orange and in two shapes: $70-$80
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now!

The curved tube is a little more expensive, and is designed to work with front mount intercooler pipe routing and curves around the OEM power steering reservoir rubber hose.

this version is a bit cleaner and a little cheaper than the bent aluminum tube inlet but requires our HMIC kit because the pipe routing of most FMIC kits interfere where this straight inlet puts the filter. Also the straight one requires you to lengthen the rubber hose on the bottom of the the power steering fluid reservoir.

installed pic on S13

get rid of all this crap!

VIEW CART

Check out the Super Street sept. 2010 article featuring Matts car pushing a HMIC setup to its limits with a huge turbo!

sidedrifts13 · 08-05-2010, 01:19 PM

I love your products soon ill be ordering

Freddy · 08-05-2010, 02:44 PM

sorry but what turbo does matt powers have in his car, it says garrett 307?

speedgod^s13 · 08-05-2010, 03:05 PM

Quote:

Originally Posted by Freddy

sorry but what turbo does matt powers have in his car, it says garrett 307?

Safe to assume it's either a 3071 or 3076.

DC Dan MAX USA · 08-05-2010, 06:30 PM

its a 3071R

*s13 @ fullboost* · 08-05-2010, 08:12 PM

sooooo legit

initial_drifter · 08-06-2010, 12:19 AM

any chance you'll have a kit for the jzz30?

DC Dan MAX USA · 08-06-2010, 11:26 PM

We would do it custom in our shop but I don't think the demand will justify a production run.

MrFairlady · 08-07-2010, 02:55 PM

hell yeah.ordered mine.

so these are in now?

DC Dan MAX USA · 08-07-2010, 09:41 PM

yes sir in stock now

G_Dripht · 08-09-2010, 04:28 PM

I have a S14 chasis with a S13 redtop in it. Should I be safe to assume that the cores are identical dimensions and the piping is the only difference, so I would order the S13 kit?

DC Dan MAX USA · 08-09-2010, 05:13 PM

Thats correct and all configurations are selectable in cart.

***** We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately.

souljaseth33 · 08-10-2010, 08:15 PM

Got a kit for a ka24e with a top mount turbo?

DC Dan MAX USA · 08-11-2010, 09:45 PM

No sir we do not. You can buy the intercooler by itself to do custom full custom pipes at a local fabricator or you can get a complete kit and mod the turbo end of the hot pipe only.

souljaseth33 · 08-12-2010, 04:52 AM

Alright, thanks

s14_jon · 08-15-2010, 10:22 PM

is the intercooler piping made from aluminum or steel?

DC Dan MAX USA · 08-16-2010, 05:41 PM

100% aluminum

MrFairlady · 08-16-2010, 05:48 PM

100% HOTNESS
Got mine today.
I guess there was no right Selection to choose from on turbo inlet style (t25 or t28) as mine is a gt2860 and it does not have the Curved/upward facing Inlet like those 2.
i did get it to work so I think i'm ok.

vqboodah · 08-22-2010, 06:11 PM

what kit would you suggest to use for s13 chassis with s14 SR motor? looks to me the s14 kit would work since if both the intercooler is the same but different piping.

DC Dan MAX USA · 08-24-2010, 02:48 AM

yes you will get the s14 intercooler kit

all options of car and turbo and motor are selectable in cart.

tinys s14 · 08-31-2010, 12:14 PM

the piping could wort for at4 top mount rite with a 45 degree coupler?

s14fbs · 08-31-2010, 12:37 PM

To all that have a ka24de top mount setup and want this
get the s14 kit and all you have to do is turn the pipe and cut about 5 inches off The end with your turbo clocked strait down it fits perfect

s14fbs · 08-31-2010, 12:39 PM

To all that have a ka24de top mount setup and want this
get the s14 s13 depending on chassis kit and all you have to do is turn the pipe and cut about 5 inches off The end with your turbo clocked strait down it fits perfect
here's a pic of my s14 with the hmic kit

DC Dan MAX USA · 08-31-2010, 05:18 PM

But the S14 kit comes with the turbo outlet coupler that is 45 degrees (t28), and if your top mount is pointed straight down, you would need the 90 degree coupler (t25), right?

What is your turbo and manifold combo exactly?

sidedrifts13 · 08-31-2010, 09:21 PM

i have a t28 bottom mount and reclocked on a s13 with stock maf and i was wondering if you offer the inlet pipe for my set up but with the breather thanks...
also is the t25 and t28 inlet the same?

Marcus · 08-31-2010, 09:44 PM

fbs that is a pretty looking ka setup.

s14fbs · 09-02-2010, 01:15 PM

Quote:

Originally Posted by DC Dan MAX USA

But the S14 kit comes with the turbo outlet coupler that is 45 degrees (t28), and if your top mount is pointed straight down, you would need the 90 degree coupler (t25), right?

What is your turbo and manifold combo exactly?

yes I had to use a old 90 coupler I had
but it fits perfect my pipe can't even blow off it follows the frame rail
the setup is
jgs log manifold
t/3t/4 turbonetics turbo

even it was a diff manifold and sat in a diff location it would still fit cause u cut the piping to size so some
might cut
less off cause it sits further back or more off cause it sits further forward or if it sirs out more there's more room to go side to side plus you cAn clock the turbo more if needed

s14fbs · 09-02-2010, 01:21 PM

DC Dan MAX USA · 09-07-2010, 06:06 PM

Quote:

Originally Posted by sidedrifts13

i have a t28 bottom mount and reclocked on a s13 with stock maf and i was wondering if you offer the inlet pipe for my set up but with the breather thanks...
also is the t25 and t28 inlet the same?

The T25 inlet has the valve cover breather and the t28 does not since the original t28 has its breather its located on the OEM metal inlet elbow.

Quote:

Originally Posted by s14fbs

yes I had to use a old 90 coupler I had
but it fits perfect my pipe can't even blow off it follows the frame rail
the setup is
jgs log manifold
t/3t/4 turbonetics turbo

even it was a diff manifold and sat in a diff location it would still fit cause u cut the piping to size so some
might cut
less off cause it sits further back or more off cause it sits further forward or if it sirs out more there's more room to go side to side plus you cAn clock the turbo more if needed

thanks for posting up the info!

projectslider · 09-09-2010, 07:35 PM

are these still available ?
with black couplerz?!
let me know!

08-05-2010, 01:11 PM	#1
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	Parts Shop MAX ~High Mount InterCooler & Turbo Inlet~ IN STOCK Live quotes in thread! Its time for you to experience instant turbo response and unclutter that engine bay NOW because HMIC's are in stock again, this round is coming with extra sexy polished pipes - Check it out: S13 S14-S15 ***UPDATE* We have a Greddy Intake Manifold cold pipe solution finalized and it has been added to the shopping cart as an HMIC kit option! Here is what the production version looks like that we are shipping now: polished + one piece ! prototype install shots: PURCHASES AND SHIPPING QUOTES DIRECTLY FROM THIS THREAD! SIMPLY CLICK THE BLUE ADD TO CART LINK VIEW CART We have been doing custom drift spec intercoolers for a long time with fantastic results: NOW: Parts Shop MAX is proud to bring you the first drift specific bolt on high mount intercooler in kit for SR and KA-T with T25 & T28 Bottom mounted turbos. This complete track proven HMIC kit delivers turbo response and reduction in temps that is second to none. MAX S13-S14 SR & KA High Mount Intercooler for T25 & T28 Turbos $380 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! *** We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately. Intercooler sold by itself for $250 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! Key features of our drift specific High Mount Intercooler Kit: ~Mounts in front of the radiator, under the core support. Inlet and outlet shoot past the sides of the radiator. ~2.5"inlet and 2.75"outlet maintain proper velocity (3" pipes are too big for stock turbos) ~3.25" thick, extra wide core gives proper volume to the short height design ~Specifically designed for the bottom mount t25&t28 nissan turbos ~Extra short pipes for best response ~No BOV flange (we dont run them on our cars...TIG your choice of flange is optional) ~Allows better water cooling because it blocks less air from the radiator ~Mounts as far as possible away from front crash zone...and thieves...and cops Not compatible with pop up headlight motors and AC condenser Radiator support must be cut as shown in install photos -Reinforced silicone couplers are available in Orange or Black. S13 kit will have: 8x Stainless T-bolt clamps 2x 2.75" straight couplers 1x 2.5" straight coupler 1x 2"-2.5" step 90* coupler S14 kit will have: 8x Stainless T-bolt clamps 2x 2.75" straight couplers 1x 2.5" straight coupler 1x 2"-2.5" step 45* coupler MAX S14 High Mount Inter Cooler Kit $380 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! *** We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately. Intercooler sold by itself for $250 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! Track tested, seeing dramatically lower water temps, and instant boost response! MAX S13 High Mount Inter Cooler Kit $380 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! * We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately. Intercooler sold by itself for $250 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! installed All intercooler kit options are available upon adding to cart for $380 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINEin stock NOW! * We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately. Intercooler sold by itself for$250 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock NOW! THE FOLLOWING ITEMS ARE SOLD SEPARATELY FROM THE HMIC KIT (although they are a match made in heaven!) I now have turbo inlets in stock for S15 T28 turbo ~ bottom mount ~ with Stock MAF or Z32 mass air flow meter Only $60! Features: ~ 3 layer reinforced silicone couplers ~ Color choice of Black or Orange ~ Bead rolled Aluminum tube ~ Stainless steel hose clamps ~ Matches the Parts Shop MAX High Mount Intercooler (HMIC kit) perfectly! Inlet pipe for T28 turbo with stock MAF available in black or orange: $60 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now! Inlet pipe for T28 Turbo with Z32 MAF available in black or orange: $60 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now! Install pictures *UPDATE*** Inlet pipe for S13 T25 turbo is here !!! Two versions are available, straight ($70) and curved ($80) TIG welded and bead rolled aluminum tube with crank case breather fitting and 4 hose clamps Comes with your choice of black or orange silicone couplers Inlet pipe for T25 turbo with stock MAF available in black or orange and in two shapes: $70-$80 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now! The curved tube is a little more expensive, and is designed to work with front mount intercooler pipe routing and curves around the OEM power steering reservoir rubber hose. this version is a bit cleaner and a little cheaper than the bent aluminum tube inlet but requires our HMIC kit because the pipe routing of most FMIC kits interfere where this straight inlet puts the filter. Also the straight one requires you to lengthen the rubber hose on the bottom of the the power steering fluid reservoir. installed pic on S13 get rid of all this crap! VIEW CART Check out the Super Street sept. 2010 article featuring Matts car pushing a HMIC setup to its limits with a huge turbo! __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business! Last edited by DC Dan MAX USA; 08-09-2010 at 05:26 PM..

08-05-2010, 06:30 PM	#5
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	its a 3071R __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-05-2010, 08:12 PM	#6
s13 @ fullboost Spirit Of Ecstasy Join Date: Dec 2007 Location: Simi Valley, CA Posts: 2,531 Trader Rating: (15) Feedback Score: 15 reviews	sooooo legit __________________

08-06-2010, 11:26 PM	#8
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	We would do it custom in our shop but I don't think the demand will justify a production run. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-07-2010, 02:55 PM	#9
MrFairlady Nissanaholic! Join Date: Mar 2007 Location: Fascination Street,N.C Age: 42 Posts: 1,701 Trader Rating: (31) Rides Gallery: MrFairlady Feedback Score: 31 reviews	hell yeah.ordered mine. so these are in now? __________________ z-tERty-2

08-05-2010, 01:19 PM	#2
sidedrifts13 Nissanaholic! Join Date: Jul 2006 Location: LOS ANGELES Age: 37 Posts: 1,883 Trader Rating: (29) Feedback Score: 29 reviews	I love your products soon ill be ordering

08-05-2010, 02:44 PM	#3
Freddy Zilvia Junkie Join Date: Oct 2008 Location: Ottawa, Canada Age: 32 Posts: 568 Trader Rating: (2) Feedback Score: 2 reviews	sorry but what turbo does matt powers have in his car, it says garrett 307?

08-06-2010, 12:19 AM	#7
initial_drifter Zilvia Junkie Join Date: Nov 2005 Location: Mill Creek Posts: 380 Trader Rating: (1) Feedback Score: 1 reviews	any chance you'll have a kit for the jzz30?

08-07-2010, 09:41 PM	#10
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	yes sir in stock now __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-09-2010, 04:28 PM	#11
G_Dripht Join Date: Mar 2009 Location: Long Island, NY Age: 35 Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	I have a S14 chasis with a S13 redtop in it. Should I be safe to assume that the cores are identical dimensions and the piping is the only difference, so I would order the S13 kit?

08-09-2010, 05:13 PM	#12
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	Thats correct and all configurations are selectable in cart. ***** We are out of black couplers at this time so when you select black as your coupler color preference, you can wait for them to come in second week in september or select orange ones & they will ship immediately. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-10-2010, 08:15 PM	#13
souljaseth33 Zilvia Junkie Join Date: Feb 2010 Location: Albany NY Age: 36 Posts: 579 Trader Rating: (5) Feedback Score: 5 reviews	Got a kit for a ka24e with a top mount turbo?

08-11-2010, 09:45 PM	#14
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	No sir we do not. You can buy the intercooler by itself to do custom full custom pipes at a local fabricator or you can get a complete kit and mod the turbo end of the hot pipe only. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-12-2010, 04:52 AM	#15
souljaseth33 Zilvia Junkie Join Date: Feb 2010 Location: Albany NY Age: 36 Posts: 579 Trader Rating: (5) Feedback Score: 5 reviews	Alright, thanks

08-15-2010, 10:22 PM	#16
s14_jon Leaky Injector Join Date: Nov 2007 Location: SoCal 626 Posts: 65 Trader Rating: (1) Feedback Score: 1 reviews	is the intercooler piping made from aluminum or steel? __________________ s14_jon

08-16-2010, 05:41 PM	#17
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	100% aluminum __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-16-2010, 05:48 PM	#18
MrFairlady Nissanaholic! Join Date: Mar 2007 Location: Fascination Street,N.C Age: 42 Posts: 1,701 Trader Rating: (31) Rides Gallery: MrFairlady Feedback Score: 31 reviews	100% HOTNESS Got mine today. I guess there was no right Selection to choose from on turbo inlet style (t25 or t28) as mine is a gt2860 and it does not have the Curved/upward facing Inlet like those 2. i did get it to work so I think i'm ok. __________________ z-tERty-2

08-22-2010, 06:11 PM	#19
vqboodah Zilvia Addict Join Date: Apr 2006 Location: MA Posts: 601 Trader Rating: (20) Feedback Score: 20 reviews	what kit would you suggest to use for s13 chassis with s14 SR motor? looks to me the s14 kit would work since if both the intercooler is the same but different piping.

08-24-2010, 02:48 AM	#20
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	yes you will get the s14 intercooler kit all options of car and turbo and motor are selectable in cart. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-31-2010, 12:14 PM	#21
tinys s14 Zilvia FREAK! Join Date: Jul 2008 Location: Queens, NY Age: 31 Posts: 1,030 Trader Rating: (12) Feedback Score: 12 reviews	the piping could wort for at4 top mount rite with a 45 degree coupler? __________________

08-31-2010, 12:37 PM	#22
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	To all that have a ka24de top mount setup and want this get the s14 kit and all you have to do is turn the pipe and cut about 5 inches off The end with your turbo clocked strait down it fits perfect __________________ http://strictlycoolstuff.tumblr.com/

08-31-2010, 12:39 PM	#23
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	To all that have a ka24de top mount setup and want this get the s14 s13 depending on chassis kit and all you have to do is turn the pipe and cut about 5 inches off The end with your turbo clocked strait down it fits perfect here's a pic of my s14 with the hmic kit __________________ http://strictlycoolstuff.tumblr.com/

08-31-2010, 05:18 PM	#24
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	But the S14 kit comes with the turbo outlet coupler that is 45 degrees (t28), and if your top mount is pointed straight down, you would need the 90 degree coupler (t25), right? What is your turbo and manifold combo exactly? __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-31-2010, 09:21 PM	#25
sidedrifts13 Nissanaholic! Join Date: Jul 2006 Location: LOS ANGELES Age: 37 Posts: 1,883 Trader Rating: (29) Feedback Score: 29 reviews	i have a t28 bottom mount and reclocked on a s13 with stock maf and i was wondering if you offer the inlet pipe for my set up but with the breather thanks... also is the t25 and t28 inlet the same?

08-31-2010, 09:44 PM	#26
Marcus Nissanaholic! Join Date: Nov 2007 Location: San Diego Age: 33 Posts: 2,065 Trader Rating: (18) Feedback Score: 18 reviews	fbs that is a pretty looking ka setup.

09-02-2010, 01:21 PM	#28
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	__________________ http://strictlycoolstuff.tumblr.com/

09-09-2010, 07:35 PM	#30
projectslider Zilvia Junkie Join Date: Apr 2007 Location: COLUMBIA, SC Age: 36 Posts: 473 Trader Rating: (1) Feedback Score: 1 reviews	are these still available ? with black couplerz?! let me know!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode