Most suitable Cams for Garrett 2871.64 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

frmdabak187 · 02-20-2015, 06:35 PM

As the title states i am looking for the most suitable CAM for my 2871.64
My goal is to have the most torque as early as possible F.Y.I

My supporting mods.

"SR20Store" S14 SR notch w/58k miles (the motor was a 0 mile build)
Eagle rods
CP pistons
ACL bearings
BC 272/272 in/ex cams (WAY to BIG)
BC valves/springs/seats
RAS
Apex-i super suction kit
Tomei 555’s
CX intercooler
2-row aluminum rad
Z32 maf
OS Giken Super Single Clutch
POWER FC

Chriscooke · 02-20-2015, 08:04 PM

Would stock cams not be ideal if you want the power low down in the rev range?

I run 260 pro cams and still find the car laggy.

livelovesole · 03-10-2015, 07:56 PM

JWT S3 personally. If you can, look up the GT2871 Thread, lots of helpful tips and info regarding different setups using your turbo.

az_240 · 03-11-2015, 02:26 AM

For what you're trying to do I say get VTC working if it isn't already and run these Tomei 256/256 cams I have for sale.
http://zilvia.net/f/showthread.php?t=593415
Torque will come on earlier than the S3's and are perfect cams for your injector/turbo size.

battosaii930 · 07-09-2015, 11:43 AM

i run a GT2871r with Tomei Poncams 256/256 and a z33 6 speed and my car is not laggy what so ever

Aeroscraper326 · 07-11-2015, 12:58 AM

I was going to say HKS 256/264... Should be good. If available

*TheRealSy90* · 07-11-2015, 01:49 AM

JWT S4 cams.

Tom N · 07-12-2015, 09:31 PM

I really like the tomei 256/260 with working VCT on smaller turbos.
Car is very responsive with a slightly larger turbo than the GT2867 (20g) and holds power towards 8k rpm.
No experience with JWT cams and would run as fast as possible from BC cams.

02-20-2015, 06:35 PM	#1
frmdabak187 Zilvia Junkie Join Date: May 2014 Location: Orange County Age: 33 Posts: 527 Trader Rating: (15) Feedback Score: 15 reviews	Most suitable Cams for Garrett 2871.64 As the title states i am looking for the most suitable CAM for my 2871.64 My goal is to have the most torque as early as possible F.Y.I My supporting mods. "SR20Store" S14 SR notch w/58k miles (the motor was a 0 mile build) Eagle rods CP pistons ACL bearings BC 272/272 in/ex cams (WAY to BIG) BC valves/springs/seats RAS Apex-i super suction kit Tomei 555’s CX intercooler 2-row aluminum rad Z32 maf OS Giken Super Single Clutch POWER FC

07-11-2015, 12:58 AM	#6
Aeroscraper326 Zilvia Addict Join Date: Dec 2007 Location: Rio Rancho, NM Posts: 995 Trader Rating: (0) Feedback Score: 0 reviews	I was going to say HKS 256/264... Should be good. If available __________________

07-12-2015, 09:31 PM	#8
Tom N Zilvia Addict Join Date: Oct 2012 Location: SW Florida Posts: 746 Trader Rating: (1) Feedback Score: 1 reviews	I really like the tomei 256/260 with working VCT on smaller turbos. Car is very responsive with a slightly larger turbo than the GT2867 (20g) and holds power towards 8k rpm. No experience with JWT cams and would run as fast as possible from BC cams. __________________ 98 240sx w/ S15 SR20DET, T2 20g, 11.22 @ 124.98

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2015, 08:04 PM	#2
Chriscooke Join Date: Apr 2010 Location: England Age: 39 Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	Would stock cams not be ideal if you want the power low down in the rev range? I run 260 pro cams and still find the car laggy.

03-10-2015, 07:56 PM	#3
livelovesole Zilvia Member Join Date: Apr 2013 Location: Long Island, NY Age: 29 Posts: 216 Trader Rating: (5) Feedback Score: 5 reviews	JWT S3 personally. If you can, look up the GT2871 Thread, lots of helpful tips and info regarding different setups using your turbo.

03-11-2015, 02:26 AM	#4
az_240 Post Whore! Join Date: Jan 2006 Location: Phx Posts: 3,097 Trader Rating: (41) Feedback Score: 41 reviews	For what you're trying to do I say get VTC working if it isn't already and run these Tomei 256/256 cams I have for sale. http://zilvia.net/f/showthread.php?t=593415 Torque will come on earlier than the S3's and are perfect cams for your injector/turbo size.

07-09-2015, 11:43 AM	#5
battosaii930 Leaky Injector Join Date: Nov 2006 Location: miami Age: 33 Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	i run a GT2871r with Tomei Poncams 256/256 and a z33 6 speed and my car is not laggy what so ever