S14 manual Trans into s13? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

turbo please · 12-27-2011, 09:24 PM

I'm buying a 1990 automatic 240sx this week and want to make it a 5 speed. I have a 5 speed from my blown up s14. I've been looking around for this swap but nothing. So is it possible to swap the s14 ka24de trans onto a ka24e motor? And what clutch an flywheel am I gonna have to buy?

562s13 · 12-27-2011, 09:53 PM

trans yes.. just plug the hole on top of the bell housing. idk about the flywheel and stuff... but i think not

*fliprayzin240sx* · 12-29-2011, 03:59 PM

Actually, clutch and flywheel between all KAs are the same. Just make sure you get an S13 driveshaft since you cant use the S14 driveshaft.

Garage Life · 12-29-2011, 04:55 PM

yes, you can you use the S14 tranny on your single cam, however, the speed sensor is different for the speedometer. you may have to switch that out.

turbo please · 12-29-2011, 08:02 PM

sweet! so the s13 driveshaft will bolt right up to the s14 tranny? and i shouldnt have to get a diff from a 5 speed should i?

*andrew600* · 12-30-2011, 11:11 PM

hmmmmmmmmmm edit. nvm

*fliprayzin240sx* · 12-31-2011, 02:15 AM

Quote:

Originally Posted by turbo please

sweet! so the s13 driveshaft will bolt right up to the s14 tranny? and i shouldnt have to get a diff from a 5 speed should i?

S13 manual shaft...auto shaft wont work.

brewster240 · 12-31-2011, 06:39 AM

Driveshaft doesn't bolt to the trans, so no it won't. It will slide in though.

12-27-2011, 09:24 PM	#1
turbo please Leaky Injector Join Date: Mar 2010 Location: Maryland Posts: 85 Trader Rating: (1) Feedback Score: 1 reviews	S14 manual Trans into s13? I'm buying a 1990 automatic 240sx this week and want to make it a 5 speed. I have a 5 speed from my blown up s14. I've been looking around for this swap but nothing. So is it possible to swap the s14 ka24de trans onto a ka24e motor? And what clutch an flywheel am I gonna have to buy?

12-27-2011, 09:53 PM	#2
562s13 Zilvia Junkie Join Date: Sep 2010 Location: norwalk Posts: 477 Trader Rating: (2) Feedback Score: 2 reviews	trans yes.. just plug the hole on top of the bell housing. idk about the flywheel and stuff... but i think not __________________ "My car got into a fight with a 18 wheeler, and the truck won."

12-29-2011, 03:59 PM	#3
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Actually, clutch and flywheel between all KAs are the same. Just make sure you get an S13 driveshaft since you cant use the S14 driveshaft. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

12-29-2011, 04:55 PM	#4
Garage Life Leaky Injector Join Date: Dec 2011 Location: S. El Monte Posts: 127 Trader Rating: (2) Feedback Score: 2 reviews	yes, you can you use the S14 tranny on your single cam, however, the speed sensor is different for the speedometer. you may have to switch that out. __________________ www.itsgaragelife.com Engine Dyno Tuning - Fabrication - Adaptronics

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-29-2011, 08:02 PM	#5
turbo please Leaky Injector Join Date: Mar 2010 Location: Maryland Posts: 85 Trader Rating: (1) Feedback Score: 1 reviews	sweet! so the s13 driveshaft will bolt right up to the s14 tranny? and i shouldnt have to get a diff from a 5 speed should i?

12-30-2011, 11:11 PM	#6
andrew600 ill tongue punch her fart box Join Date: Sep 2009 Location: bethalto, il Age: 31 Posts: 1,221 Trader Rating: (12) Feedback Score: 12 reviews	hmmmmmmmmmm edit. nvm

12-31-2011, 06:39 AM	#8
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 38 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	Driveshaft doesn't bolt to the trans, so no it won't. It will slide in though.