Waveous72

k well then how do i bypass the switch??? and i was knocking on the starter and that didnt work.

r6_240sx

Damn man WTF, one thing at a time. Did you get your starter tested? If so what were the results? If you hit the starter and it didn't work, chances are it's dead.

If it's dead, it's dead you need a new starter, period.

And no you can't bypass the starter, WTF...

To bypass the clutch safety switch, there's two wires that go to the clutch, connect those two with whatever method makes u happy. I think at this point in time ur probably best with it on, LOL...

http://www.2carpros.com/first_things..._not_crank.htm

Waveous72

k i got my starter battery and my fuses checked and they were all good. so then i just followed all the wires that led to the switch when i got under my dash i saw that the switch was broken and i was just like what the hell i didnt see this the first time i bypassed it with speaker wire and it started right up. Thanks guys

now anybody know whats wrong with my lights they will go up but wont go back down. i have to put them down by spinning that one nob. please help i want my baby perfect

98s14inaz

It's two bolts holding that thing in. Get dirty, crawl under there, remove it, take it to vatozone, get it checked, reinstall new or old one...your choice. This thread should have been four posts long.

-op my car won't start
-zilvia check your starter
-op ok i'll check that
-op thank you zilvia, that was the problem. This was so easy to fix once I crawled under the car and got dirty.

__________________
-Retired

axiomatik

It's probably the combination switch/stalk on your steering column. The contacts wear out over time and no longer make the connections. The exact same thing happened to me. Replacing the switch should fix the problem. If you know how to use a multi-meter and the FSM, you can test your old switch before buying a new one.

__________________