shoguner

Im kinda thinking my FPR might be bad. It makes a weird rushing noise haha.

Nah, i have a friend who has a new act clutch for 40 bucks, so im getting that, lightened flywheel, and a act pressure plate.

__________________
1uz build. Wiring on Page 2
Click

Sezio

Mine does that sound too.

cbcm2435

yeah, this isnt really a build thread, this is more of a how to fuck up a car and think its cool thread

Sezio

Believe it or not this guy helped me get my car going. May not be the best thread but he's very helpful. And also sorry Shoguner not trying to thread jack but would it be cool if i directed them to my build if need be?

unwtdhero

Good build op, lots of useful information in here aside from the regular haters.
You should just put neons on and a aluminum wing. Give them something to bitch about
Subscribed for dedicated track slut, not show car

shoguner

Ya going from


to



and from a 100hp ka24e to a 250hp ka-t to a 250hp v8.

Isn't a build thread at all.
Thanks for pointing that out to me.


Thanks Sezio, Sure.

Haha thanks man.

__________________
1uz build. Wiring on Page 2
Click

shoguner

Update!

I was getting sick of my wheels hitting my tension rods and stealing my angle!

So i made new arms

Didn't really clean up the welds.. deal with it. also moved my tension rods to the sway bar hole. Even more angle!



Well... Sold my clutch! 900 bucks! Half the price of my entire swap!


Bought a new 3sgte flywheel, had it machined for the bolts.
$150


New Pressure plate for 3sgte


I bought a ACT sr20 disk but all the pucks are loose... anyone seen that?
So my friend gave me this clutch for now, seems really mild, i hope it holds.
There is a clutch shop here that will redo a clutch, so hopefully they can redo the act for fairly cheap.


Had to add a bit to the throw out bearing.


Ready to go in... again...



Also got bored. Made a bash bar, since we can do tandem at our local events.

__________________
1uz build. Wiring on Page 2
Click

shoguner

That new clutch was awesome!!!

But something broke... again.

Axle sheared. Luckily i had one at my house. So i rushed home and came back and replaced it!

Car felt amazing!
I do need an alignment, my front tow is pretty positive with my new LCAs'




I am classy.
We finally got tandems at our local events!




Now that the car is reliable, i can focus on the exterior.
Paint, overfenders, body kits, etc.

__________________
1uz build. Wiring on Page 2
Click

mikerbike

I'm not dealing with this very well.

__________________

Sezio

freaking awesome bro! I can't wait to let my car loose at the track.

NismoboiZ33

Nice build bro i love it keep it up cant wait to see more

shoguner

damn....





Well. Looks like cyl 1 spun a bearing.
I think that's what that means?

__________________
1uz build. Wiring on Page 2
Click

Sezio

DAMN!!! you started hearing some knocking at the track?

greenwood

I realize that this is a drift car, but the aesthetics just make me very depressed.

shoguner

ya mid corner.
I think the oil sloshed to one side (my pan is dented) and caused this.

Ok.

Overfenders and paint are coming soon. i hope i make you not depressed. Don't kill yourself over a pos s13.

__________________
1uz build. Wiring on Page 2
Click

Sezio

shit happens.. What weight oil are you using? Also you can get this engine very cheap at the junk yard so no biggy lol

zenkiset

lovin the thread man! glad to see another guy with a 1uz setup! I have the engine and ecu for my swap but need a wiring harness. you don't have an extra for sale by chance do you? keep up the dedication! . it takes a lot to stay motivated after so many things break, you sire are a role model to me haha.

__________________

shoguner

I do have 1995 Sc400 one for sale.

__________________
1uz build. Wiring on Page 2
Click

bc.

I did this (or pretty sure it was the cause) to my SR a few years ago. Spun #2 and #3 iirc. It was leaking a small bit of oil and I drove it 400 miles to the track. Took a lap to learn the course (before I refilled my oil to level) and went kinda quick and heard rod knock before the lap was done.

It sucks, I know how you feel *hug* (no homo)

__________________
* S14SR22 * 9.0 c/r * GT3071R *

shoguner

Thanks man

I plan on building a new oil pan with some trap doors to prevent this happening. (even though it was my fault)

I also picked up a 94 ls400 engine this weekend for 300 bucks. Engine, harness, ecu and power steering pump. and i have about 80 bucks in cores i can return.

Needs some gaskets. So plan on some more updates, and another wire up.

__________________
1uz build. Wiring on Page 2
Click

mikerbike

Remember when you ran into me again?
https://www.facebook.com/photo.php?v...type=2&theater

__________________

shoguner

Nope, Never happened...

__________________
1uz build. Wiring on Page 2
Click

zenkiset

with the wiring you used, what things for daily driving actually work?

__________________

vehicle336

Interesting build thread, at least you're doing shit with it instead of hardparking and collecting internets glories.

So when did Miller Motorsports start letting the drift kids back to play? Last I heard Biggie blew a gasket and outlawed it at his events and the park didn't want kids with no liability insurance tearing up their parking areas.

It's nice though, glad you guys have a legit venue to practice at.

__________________
May the bridges I burn light the way.

shoguner

Jason Smith Fixed all the problems (even though there really wasn't any, just word of mouth shits)

We have tandem, ride alongs. All the good stuff, we are working on getting on the track for next year.

And thank you. I do plan on prettying this up a bit.

__________________
1uz build. Wiring on Page 2
Click

shoguner

BLAAAAAAAAAAAACK.
I got bored with my engine painted stuff black.

Replaced timing belt, water pump, front main seal.

Still need to replace rear main seal, oil pan gasket. I am going to make some baffles for the oil pan with some trapdoors.


kinda like that, but more square.

__________________
1uz build. Wiring on Page 2
Click

badass8

Wow you have a lot of people bitching about how ugly the car looks and whatever else "This isn't a build thread". Zilvia members well never appreciate someone sharing their progress. Anyways....

I am trying to pick between an rb20 or a 1uzfe for my next swap. Both are pretty cheap for the power gains. I will just have to do more research on the 1uz swap since there aren't much information on them.

But keep doing what you are doing man.

shoguner

Made some new arms, i sold my last ones.
Got a flocked dash in the car, added oil pressure and temp.
I plan on painting the inside gray, but won't have time as i need to be loaded up, for the event this weekend, on thursday


Got the engine in the car. Now i just need to wire it.

__________________
1uz build. Wiring on Page 2
Click

zenkiset

any updates?!

__________________

shoguner

Having some wiring issue.
I put a 94 ls400 engine in here. Its a completely different.
have an event on Nov 16th. Need to get it ready from that.

__________________
1uz build. Wiring on Page 2
Click