Type x lights, broken studs - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

justinbyrant · 08-19-2016, 03:28 PM

got myself a set of kouki lights for my s13 hatch for dirt cheap, one side has 2 broken studs in it, the studs themselves are intact but they pulled out of the housing, what type of adhesive do people use? I tried gorilla glue but it didn't do anything at all thinking about using a 2 part epoxy now just want some feedback

rawgarage · 08-19-2016, 03:42 PM

prep the area ( scrape off and adhesive) and use epoxy properly mixed

KAT-PWR · 08-19-2016, 06:57 PM

Plastic weld, or 2 part epoxy

DiscountPirate · 08-22-2016, 06:52 AM

Even super glue would work if it's just the stud pulled out and the hole is intact. ust make sure you don't over torque it when you install it to make it happen again.

08-19-2016, 03:28 PM	#1
justinbyrant Zilvia Member Join Date: May 2011 Location: eugene Age: 29 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	Type x lights, broken studs got myself a set of kouki lights for my s13 hatch for dirt cheap, one side has 2 broken studs in it, the studs themselves are intact but they pulled out of the housing, what type of adhesive do people use? I tried gorilla glue but it didn't do anything at all thinking about using a 2 part epoxy now just want some feedback

08-19-2016, 06:57 PM	#3
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	Plastic weld, or 2 part epoxy __________________ MRP Manufacturing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-19-2016, 03:42 PM	#2
rawgarage Banned from the Marketplace Join Date: Oct 2007 Location: h o u s t o n Age: 32 Posts: 5,990 Trader Rating: (75) Feedback Score: 75 reviews	prep the area ( scrape off and adhesive) and use epoxy properly mixed

08-22-2016, 06:52 AM	#4
DiscountPirate Zilvia Member Join Date: Jul 2016 Location: SoCal Posts: 189 Trader Rating: (0) Feedback Score: 0 reviews	Even super glue would work if it's just the stud pulled out and the hole is intact. ust make sure you don't over torque it when you install it to make it happen again.