S13 Engine to Dash Harness - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240EsX · 04-05-2012, 10:49 PM

I recently bought a 93 hatch shell.. It had no engine harness so I bought one which is the KA24DE. I'm trying to see if anyone can visually show me where the connector inside of the car (dash harness) connects to the one thats coming from outside the engine bay... I can't seem to find it under the passenger side glove compartment.. Is that where I should be looking in the first place?

Zed Nismo · 04-09-2012, 12:27 AM

The dash connector is by the passenger side kick panel. right on top of where the ECU is mounted.

Pro ViZIon · 04-09-2012, 12:54 AM

The connector itself is tucked up a bit higher from there. You'll see it from the glove box.

240EsX · 04-09-2012, 01:09 AM

And this connector should be female right? I haven't thoroughly looked at the engine harness but I'm guessing its a green looking male connector... and the dash should be female?

Zed Nismo · 04-09-2012, 01:12 AM

I believe it is a female connector.. it should either by brown or white if I remember correctly from my KA-E to KA-DE swap. Since you have a '93, I believe you have a white connector.

240EsX · 04-09-2012, 01:15 AM

Quote:

Originally Posted by Zed Nismo

I believe it is a female connector.. it should either by brown or white if I remember correctly from my KA-E to KA-DE swap. Since you have a '93, I believe you have a white connector.

Alright, I'll try looking for that.. thanks!

Zed Nismo · 04-09-2012, 01:20 AM

You're welcome.

240EsX · 04-09-2012, 01:52 AM

So I'm looking at the engine harness thats still out the car.. and I can't seem to even find the connector that should be connecting with the one in the dash.. is it just me or my harness is missing it... I think the green plug is just a diode?.. I didn't think that would be the connector.. -_-

Uploaded with ImageShack.us

Pro ViZIon · 04-09-2012, 09:56 AM

That's cause the plug your looking for is non existent on that harness you have. All those cut wires at the ecu plug are probably it. It stretches out from there for about a foot or so.

240EsX · 04-09-2012, 01:10 PM

Quote:

Originally Posted by Pro ViZIon

That's cause the plug your looking for is non existent on that harness you have. All those cut wires at the ecu plug are probably it. It stretches out from there for about a foot or so.

Damn.. and the guy that sold me it said it was uncut.. -__-

Pro ViZIon · 04-09-2012, 09:59 AM

Oh and you should be looking for a "brown" plug.

Pro ViZIon · 04-09-2012, 01:18 PM

Was it someone local? You should have noticed it was cut just from those wires. I believe I have a spare harness with the wires you need if you want to pick it up.

240EsX · 04-09-2012, 03:37 PM

Quote:

Originally Posted by Pro ViZIon

Was it someone local? You should have noticed it was cut just from those wires. I believe I have a spare harness with the wires you need if you want to pick it up.

Damn I didn't even notice u were in vegas.. hahaha.. Yea I picked it up locally.. It's my first time messing with a 240 so I wouldn't even noticed what I was missing..
I'll see if the guy can work something out on this.. if not how much would you want for it?

Pro ViZIon · 04-09-2012, 07:51 PM

I'll give it to you.

240EsX · 04-09-2012, 08:06 PM

Quote:

Originally Posted by Pro ViZIon

I'll give it to you.

Vegas is so small.. you might just be the guy I bought it off of.. judging from
your sig u have an rx-7.. Did you happen to sell a harness and a driveshaft?
If so.. that'd be me that bought it.. haha

Pro ViZIon · 04-09-2012, 10:37 PM

Wasn't me.

04-05-2012, 10:49 PM	#1
240EsX Join Date: Mar 2012 Location: Las Vegas Age: 30 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	S13 Engine to Dash Harness I recently bought a 93 hatch shell.. It had no engine harness so I bought one which is the KA24DE. I'm trying to see if anyone can visually show me where the connector inside of the car (dash harness) connects to the one thats coming from outside the engine bay... I can't seem to find it under the passenger side glove compartment.. Is that where I should be looking in the first place?

04-09-2012, 12:54 AM	#3
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 31 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	The connector itself is tucked up a bit higher from there. You'll see it from the glove box. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

04-09-2012, 09:56 AM	#9
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 31 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	That's cause the plug your looking for is non existent on that harness you have. All those cut wires at the ecu plug are probably it. It stretches out from there for about a foot or so. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

04-09-2012, 09:59 AM	#11
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 31 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	Oh and you should be looking for a "brown" plug. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

04-09-2012, 01:18 PM	#12
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 31 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	Was it someone local? You should have noticed it was cut just from those wires. I believe I have a spare harness with the wires you need if you want to pick it up. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

04-09-2012, 12:27 AM	#2
Zed Nismo Leaky Injector Join Date: Dec 2010 Location: Manteca, CA Age: 28 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	The dash connector is by the passenger side kick panel. right on top of where the ECU is mounted.

04-09-2012, 01:09 AM	#4
240EsX Join Date: Mar 2012 Location: Las Vegas Age: 30 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	And this connector should be female right? I haven't thoroughly looked at the engine harness but I'm guessing its a green looking male connector... and the dash should be female?

04-09-2012, 01:12 AM	#5
Zed Nismo Leaky Injector Join Date: Dec 2010 Location: Manteca, CA Age: 28 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	I believe it is a female connector.. it should either by brown or white if I remember correctly from my KA-E to KA-DE swap. Since you have a '93, I believe you have a white connector.

04-09-2012, 01:20 AM	#7
Zed Nismo Leaky Injector Join Date: Dec 2010 Location: Manteca, CA Age: 28 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	You're welcome.

04-09-2012, 01:52 AM	#8
240EsX Join Date: Mar 2012 Location: Las Vegas Age: 30 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	So I'm looking at the engine harness thats still out the car.. and I can't seem to even find the connector that should be connecting with the one in the dash.. is it just me or my harness is missing it... I think the green plug is just a diode?.. I didn't think that would be the connector.. -_- Uploaded with ImageShack.us

04-09-2012, 07:51 PM	#14
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 31 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	I'll give it to you. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

04-09-2012, 10:37 PM	#16
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 31 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	Wasn't me. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode