Clunking noise front driver side - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

highwhey_14 · 05-08-2011, 11:22 AM

I have tein coils with pillowball mounts so I expect some noise but everytime I drive the clunking noise is there, and the quicker I go...the louder it gets. It has gotten to the point where it's extremely loud...and I don't feel comfortable driving it. I already raised the car up and checked for any play on the wheels and there was none on the wheels. I rolled the wheel and it made no noise at all. The noise stops as soon as I hit the brake though, what can this be? Also, there is a nut missing on the pillowball mount/strut tower. Only 2 are bolted instead of the 3. Can this be making the noise? If so, where can I get a nut? I've tried fitting some different nuts and the ones that are of similar size don't go in so I'm assuming its the thread pitch. Any help is appreciated.

highwhey_14 · 05-09-2011, 08:09 PM

there is a very minimal amount of play in the wheel but when i rolled the wheel it felt like it had a flat spot...as if there is a ball bearing missing. that and one of the wheel studs is broken(still in the hub itself but it seems to have seperated from the back because i can pull the stud back and forth with my finger. i've decided to replace the wheel bearing and buy a new stud.

05-08-2011, 11:22 AM	#1
highwhey_14 Leaky Injector Join Date: Jan 2009 Location: AZ Age: 34 Posts: 137 Trader Rating: (-1) Feedback Score: -1 reviews	Clunking noise front driver side I have tein coils with pillowball mounts so I expect some noise but everytime I drive the clunking noise is there, and the quicker I go...the louder it gets. It has gotten to the point where it's extremely loud...and I don't feel comfortable driving it. I already raised the car up and checked for any play on the wheels and there was none on the wheels. I rolled the wheel and it made no noise at all. The noise stops as soon as I hit the brake though, what can this be? Also, there is a nut missing on the pillowball mount/strut tower. Only 2 are bolted instead of the 3. Can this be making the noise? If so, where can I get a nut? I've tried fitting some different nuts and the ones that are of similar size don't go in so I'm assuming its the thread pitch. Any help is appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-09-2011, 08:09 PM	#2
highwhey_14 Leaky Injector Join Date: Jan 2009 Location: AZ Age: 34 Posts: 137 Trader Rating: (-1) Feedback Score: -1 reviews	there is a very minimal amount of play in the wheel but when i rolled the wheel it felt like it had a flat spot...as if there is a ball bearing missing. that and one of the wheel studs is broken(still in the hub itself but it seems to have seperated from the back because i can pull the stud back and forth with my finger. i've decided to replace the wheel bearing and buy a new stud.