Fixation

making this thread because when i was searching for 527 pictures, nobody had any pictures of the 18x8.75s or any other offsets, it was pretty much 9.75+25 or nothing.

i decided to bite the bullet and buy them in 18x8.75+35 since i dont like the poke on the fronts....

specs - 527s 18x8.75 +35 +3mm spacer front 18x9.75 +25 rear

The fronts are pretty much dead on lip to fender, the rears are the same but with a little camber adjustment.

anyways, ive seen a couple people not happy with their xxr fitment, so i figured id post this in case anyone else was wondering about this type of fitment on an s13.

here's the result

sorry for the shitty pictures, novice with a new camera.

delado

I can't tell shit with these shitty pictures.

EhrikETFG

i guess theyre okay, shoulda went 9.75 or w/e all way around..

Fixation

here's another, shitty picture, but gives a better angle on the offset

delado

rears are cool, they just need spacer/more low.

fronts are ghayz.

Fixation

you like it when they poke out like this?

delado

fuck no. That looks like dick.

Fixation

thats the 9.75 on the front, i knew i didnt want to look like that.

EhrikETFG

you can add camber/less spacers in the front too you know

delado

It's not because of the size...

He's high ass fuck and runs a huge tire and no camber.

Fixation

i just dont like that poke and camber look i guess.

In my opinion, this is the best looking s13 ever. Was aiming for a fitment kinda like this, not super slammed or cambered

EhrikETFG

congrats you nailed it

kalypso123

- Stagger fitment is more elegant if you can work it.

- Also the body line under the door, should be parallel to the street, yours is angled up towards the back.

- Lastly go as low as you can without pulling the fenders. ( but if you DO pull see photo below )

- Try to tuck the rear.


'Vanquish' lip, chuki sides, and maximum low (with or without pulled fenders) = ~2005 Japan Spec

Prove It

18's stock body fail

OBEEWON

Been trying to find pictures of this car again forever.

Best Coupe in life.

I think your car looks good as is. Perfect for a mild joint.

__________________

!Zar!

Wtffffff


Post your question in the shitty poor people thread.

http://zilvia.net/f/off-topic-chat/3...uys-think.html

__________________

dazed

Rofl.

Thats why it's never as easy as slapping them on and calling it a day.

And if you don't like the "poke and camber look" why post your car in the fitment thread? I'm confused. You have to put in the work for it to look good.

revcyanide

that thread is locked...

you know, just so you know.

__________________

!Zar!

Good.

Hopefully this one is next.

There doesn't need to be a thread solely for this wheel because he can't figure out a quarter of an inch.

__________________

srstan

I love how people bash this guy on what he does to HIS car. If you dont like it move on...no need to shit on his thread.

__________________

revcyanide

no i agree, this thread is pointless.
just letting you know you told him to post in a locked thread.

__________________

NoPistons!

The l33t BrOs ruin shit for everyone.

hearing this shit from people at a meet? Facepunch or i'd beat your tiny ballsack to death with a jack handle. One of the two. Some people pride themselves on being giant assholes shitting on everyone.

Zar, where do you put the ladder to climb up on that horse of yours? Would i ask you to shut up? No. You're free to say and think whatever you please. I find it funny you get mad in the face over wheels and shit. Bet you're one hell of a hardparker..... Leaning all cool in your tight pants while you give guys giant boners with your "awesome". Bet you get all the ladies with other men swinging from your ballsack, right?

__________________
Just another broke ass drifter

raz0rbladez909

Lol wow someone has anger issues

__________________
2004 Corvette Z06 / 1971 240z

Imarvin240

i can see this thread took a bad turn hah continue.

__________________
https://instagram.com/eck_matthew/

FusionR240sx

don't sit here and tell me that something close to 9j +30 is flush up front. shut up. it isn't.

when i had those wheels on my car i had 9.75 up front with a 8mm spacer and it still needed a good 10mm more.

another guy on here has 9.75+0 front and -5 rear.

__________________
WUT?

OBEEWON

Hey.

Serious question.

Why do guys wear tight pants?

Is it to accentuate the scrotal area?

Like sock stuffing?

__________________

FusionR240sx

wha di bloodclat a gwan youth?!

hahahha anyways.

8.75 +3,000 isn't flush up front.


/endthreadnow

__________________
WUT?

raz0rbladez909

Because the current trend is to be as much like a woman as you can possibly get without having a vagina. Look at all these dudes wearing pants that their ladies can barely fit into, wearing pink, and accentuating shit with hello kitty

__________________
2004 Corvette Z06 / 1971 240z

!Zar!

Fact one, you are building a peasant car. So that gives reason for my high horse.

Fact two, I NEVER told you to shut the fuck up.

Fact three, I am free to say what I wish, hence why I did in the first place.

Fact four, I'm not mad over the wheels, just your lack of figuring out wheel sizes for yourself.

Fact five, I was drifting last week, when was the last time you were at a track?

Fact six, My pants are pretty tight, though they cold be tighter. Funny thing is my outfit costs more than your wheels that this thread is about.

Fact seven, my balls love the attention. Has anyone every caressed your balls? Shit feels AWESOME.

__________________

revcyanide

truer words have not been spoken.

__________________