engine wont crank - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

alex_s817 · 12-13-2009, 02:55 PM

just re-did my engine bay fuse box harness and tucked it under the dash. also re-did my engine harness by re-wiring just how it was when it worked, only cleaner. all the lights and blinkers work and i put the dash back in because of this, assuming that i had done it right. im not certain that i didnt, but the engine will not crank. when i turn the key, nothing happens. now i think this could be engine harness related too right?

if anyone can just point me in the right direction i would appreciate it. im thinking at this point i need to get out the test light and see if the starter is getting a switched 12 volt signal?
thanks guys

12-13-2009, 02:55 PM	#1
alex_s817 Zilvia Member Join Date: Oct 2007 Location: Raleigh, NC Posts: 253 Trader Rating: (2) Feedback Score: 2 reviews	engine wont crank just re-did my engine bay fuse box harness and tucked it under the dash. also re-did my engine harness by re-wiring just how it was when it worked, only cleaner. all the lights and blinkers work and i put the dash back in because of this, assuming that i had done it right. im not certain that i didnt, but the engine will not crank. when i turn the key, nothing happens. now i think this could be engine harness related too right? if anyone can just point me in the right direction i would appreciate it. im thinking at this point i need to get out the test light and see if the starter is getting a switched 12 volt signal? thanks guys

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode