Party Crasher S13 Ka Vert Rebuild from Michigan - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

PartyCrashers · 10-13-2017, 09:03 AM

New Member on here been lurking for a long time never took the time to join way behind on a build Log but here is my story.

A few years ago I picked up this mint vert and started a build on it. This is about the 10th 240 i have owned built and sold

Long story short I built it drifted it a few times got bored and decided to sell it to a buddy, when i sold it it looked like this

(Fast forward to now)

Well he had it for a few months, parked it on the side of his street and some lady in a jeep smashed into it, very sad day.
So he bought a new roller and transferred all the parts to the shell was going to scrap it so long story short I ended up with my car back for free, Like this!

PartyCrashers · 10-16-2017, 12:04 PM

I'm really behind on the updates so here is a lot!

Picked up a donor car for $500 with a blown motor, because my car is so clean and I already put tubs and cage in it i decided on keeping my shell.

Got it home

Then this happened

Loaded up heading to the body guy

Picked up some cheap overs and a Drift Armor bash bar to help align everything

He is doing a really good job

Its home!

Time to make some room

I tubed the front last year but with everything out i deiced to fill a few holes and respray it.

Picked up this used KA motor from a friend for $50 gonna take it down and refresh it

Plan on going KA-T eventually so i had a oil return put in wile the pan was off, im just gonna put a AN cap on it for now

All done ready to go in!

Its in

Picked up this Moroso switch panel gonna start getting this thing wired

Even got @Poormans180sx over here to help me get this thing wired up.
(Thanks again man!)

Picked up a pair of style 5's for cheap offset is junk but hey will work for now

They where pretty torn up so I painted them white

It runs!

PartyCrashers · 10-18-2017, 07:34 AM

Well it drove outside under its own power that's a start i guess. Took a few pics with my buddies car (I.E my old car kinda????)

Picked up this Silvia front cheap (not really sure how i feel about it)

Got it painted to match

My good buddy Owns ctsvbrakeswap.com and hooked me up with a Sponsorship and some free brackets. I also picked up a ASD hydro, CTS-V calipers,#50z track pack rotors and 300zx rear brakes all brand new.

This is what 1200$ in brake parts looks like!!

These things are awesome!!!!

Picked up a set of new lower control arms to box and extend

Got a temporary seat by Procar it's Mhhhh but it will work for now, along with some Racequip harnesses

ASD is in and working

PartyCrashers · 10-19-2017, 11:31 AM

went out took some pics

Been having a issue with cold start and the timing feeling super flat under load so i pulled the timing back apart to check it everything looks good (still haven't figured it out dont really know whats going on)

**Phlip** · 10-19-2017, 02:24 PM

I need you to do something about your images, like soon

5280VertDET · 10-19-2017, 03:23 PM

Quote:

Originally Posted by PartyCrashers

It runs!

[IMG] http://zilvia.net/f/attachment.php?a...1&d=1508176982 /IMG]

Select Drop Down:

Where do I find the BBCode?

https://help.imgur.com/hc/en-us/arti...r-Forum-Users-

PoorMans180SX · 10-20-2017, 04:51 AM

Austin, host your pics on Imgur and copy the IMG code over from there.

PartyCrashers · 10-20-2017, 01:27 PM

All Pics fixed

(Update)
Sold the Silvia front just wasn't feeling it on the vert got some pop up stuff put back on added the dmax style hood vent and Aerocatch hood pins, also lowed the car a bunch fixed some odds and ends.
Also picked up a set of MB Battles for the front

Pics of our cars and a cool RB car i'm building for a friend(more pics of that to come)

Rolled out to a No Star Bash with the other car and a few other team members didn't take my car its still not running right

It rained a lot!

SteeleBrothersDrifting_Mike · 10-21-2017, 10:19 AM

Looks good buddy. Hope to see you on track more next season

PoorMans180SX · 10-21-2017, 11:49 AM

Quote:

Originally Posted by SteeleBrothersDrifting_Mike

Looks good buddy. Hope to see you on track more next season

Hi Mike!

PartyCrashers · 10-24-2017, 11:40 AM

Update!

Just got my new ORIGIN Labo GT type 3 overs 55 rears 50 fronts

Got it all painted up and finally got the ride height sorta right

Went out for a cruise

hatchdrift · 10-25-2017, 05:52 PM

Awesome!

Sent from my iPhone using Tapatalk

SteeleBrothersDrifting_Mike · 10-25-2017, 06:25 PM

Quote:

Originally Posted by PoorMans180SX

Hi Mike!

Hey Andy!

http://icandy.zilvia.net/img/smilies/drivin.gif

hotlavaflow · 10-25-2017, 09:49 PM

Looks good, inspiring me to stop being lazy and work on my Vert.

Reece · 10-25-2017, 10:04 PM

How difficult was that quarter panel swap? I'm probably gonna end up having to do the same thing to my car.

PartyCrashers · 10-30-2017, 11:04 AM

I bought a donor car cut that up gave it to a guy i know that does frame and body work

kneeecoo · 12-19-2017, 01:48 AM

Quote:

Originally Posted by PartyCrashers

What is this paste thingy called?

hatchdrift · 12-19-2017, 07:05 AM

Quote:

Originally Posted by kneeecoo

What is this paste thingy called?

Seamsealer

Sent from my iPhone using Tapatalk

d_nice · 12-19-2017, 07:38 AM

Looks good man keep it up.

RalliartRsX · 12-19-2017, 08:06 AM

Heard your buddy was parting that RB/S13 you were building??

PartyCrashers · 04-19-2018, 07:39 AM

Sorry for the lack of updates I bought a new house and that has occupied most of my time.

Finally got my car out of storage test fit my new wing and KBD side skirts.
I'm very happy with how this custom wing came out never done anything like this before.
I bought a random deck made custom low mount wing stands and bought some Battle Aero end plates tell me what you guys think!

Picked up this set of gulf stitch wheels for a super deal 18x10.5

Been working hard on getting my new garage remodeled, but I found some time to install my wheels final mount my wing and test fit my rear diffuser.

tuzzio · 04-19-2018, 08:07 AM

If you want honest opinions, I don't care for the wing at all.

Happy that 95% of the big wing trend died 3 years ago.

kneeecoo · 04-19-2018, 09:12 AM

Not a fan of big wings but low mount is pretty cool imo. The wheels really help the wing fit. Looks like a do luck jzx wing which I wanted to throw on my coupe. Glad to see it looks really good!

Sent from my SM-G955U using Tapatalk

10-13-2017, 09:03 AM	#1
PartyCrashers Join Date: Oct 2017 Location: Michigan Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Party Crasher S13 Ka Vert Rebuild from Michigan New Member on here been lurking for a long time never took the time to join way behind on a build Log but here is my story. A few years ago I picked up this mint vert and started a build on it. This is about the 10th 240 i have owned built and sold Long story short I built it drifted it a few times got bored and decided to sell it to a buddy, when i sold it it looked like this (Fast forward to now) Well he had it for a few months, parked it on the side of his street and some lady in a jeep smashed into it, very sad day. So he bought a new roller and transferred all the parts to the shell was going to scrap it so long story short I ended up with my car back for free, Like this! __________________ Party Crashers Drift Last edited by PartyCrashers; 10-20-2017 at 12:50 PM.. Reason: pictures link not working

10-16-2017, 12:04 PM	#2
PartyCrashers Join Date: Oct 2017 Location: Michigan Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	I'm really behind on the updates so here is a lot! Picked up a donor car for $500 with a blown motor, because my car is so clean and I already put tubs and cage in it i decided on keeping my shell. Got it home Then this happened Loaded up heading to the body guy Picked up some cheap overs and a Drift Armor bash bar to help align everything He is doing a really good job Its home! Time to make some room I tubed the front last year but with everything out i deiced to fill a few holes and respray it. Picked up this used KA motor from a friend for $50 gonna take it down and refresh it Plan on going KA-T eventually so i had a oil return put in wile the pan was off, im just gonna put a AN cap on it for now All done ready to go in! Its in Picked up this Moroso switch panel gonna start getting this thing wired Even got @Poormans180sx over here to help me get this thing wired up. (Thanks again man!) Picked up a pair of style 5's for cheap offset is junk but hey will work for now They where pretty torn up so I painted them white It runs! __________________ Party Crashers Drift Last edited by PartyCrashers; 10-20-2017 at 12:49 PM.. Reason: Image link not working

10-18-2017, 07:34 AM	#3
PartyCrashers Join Date: Oct 2017 Location: Michigan Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Well it drove outside under its own power that's a start i guess. Took a few pics with my buddies car (I.E my old car kinda????) Picked up this Silvia front cheap (not really sure how i feel about it) Got it painted to match My good buddy Owns ctsvbrakeswap.com and hooked me up with a Sponsorship and some free brackets. I also picked up a ASD hydro, CTS-V calipers,#50z track pack rotors and 300zx rear brakes all brand new. This is what 1200$ in brake parts looks like!! These things are awesome!!!! Picked up a set of new lower control arms to box and extend Got a temporary seat by Procar it's Mhhhh but it will work for now, along with some Racequip harnesses ASD is in and working __________________ Party Crashers Drift Last edited by PartyCrashers; 10-20-2017 at 01:25 PM.. Reason: Photo Link

10-19-2017, 11:31 AM	#4
PartyCrashers Join Date: Oct 2017 Location: Michigan Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	went out took some pics Been having a issue with cold start and the timing feeling super flat under load so i pulled the timing back apart to check it everything looks good (still haven't figured it out dont really know whats going on) __________________ Party Crashers Drift Last edited by PartyCrashers; 10-20-2017 at 02:33 PM.. Reason: Link Broken

10-20-2017, 04:51 AM	#7
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,431 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	Austin, host your pics on Imgur and copy the IMG code over from there. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

10-20-2017, 01:27 PM	#8
PartyCrashers Join Date: Oct 2017 Location: Michigan Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	All Pics fixed (Update) Sold the Silvia front just wasn't feeling it on the vert got some pop up stuff put back on added the dmax style hood vent and Aerocatch hood pins, also lowed the car a bunch fixed some odds and ends. Also picked up a set of MB Battles for the front Pics of our cars and a cool RB car i'm building for a friend(more pics of that to come) Rolled out to a No Star Bash with the other car and a few other team members didn't take my car its still not running right It rained a lot! __________________ Party Crashers Drift Last edited by PartyCrashers; 10-20-2017 at 02:48 PM..

10-21-2017, 10:19 AM	#9
SteeleBrothersDrifting_Mike Leaky Injector Join Date: Sep 2012 Location: Michigan Posts: 108 Trader Rating: (0) Feedback Score: 0 reviews	Looks good buddy. Hope to see you on track more next season

10-24-2017, 11:40 AM	#11
PartyCrashers Join Date: Oct 2017 Location: Michigan Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Update! Just got my new ORIGIN Labo GT type 3 overs 55 rears 50 fronts Got it all painted up and finally got the ride height sorta right Went out for a cruise __________________ Party Crashers Drift

10-25-2017, 05:52 PM	#12
hatchdrift Leaky Injector Join Date: Sep 2015 Location: Chicago, IL Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	Awesome! Sent from my iPhone using Tapatalk

10-25-2017, 09:49 PM	#14
hotlavaflow Zilvia FREAK! Join Date: Jul 2007 Location: BKLYN NYC Posts: 1,263 Trader Rating: (23) Feedback Score: 23 reviews	Looks good, inspiring me to stop being lazy and work on my Vert. __________________

10-30-2017, 11:04 AM	#16
PartyCrashers Join Date: Oct 2017 Location: Michigan Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	I bought a donor car cut that up gave it to a guy i know that does frame and body work __________________ Party Crashers Drift

12-19-2017, 07:38 AM	#19
d_nice Post Whore! Join Date: Aug 2010 Location: florida Age: 40 Posts: 3,592 Trader Rating: (39) Feedback Score: 39 reviews	Looks good man keep it up.

12-19-2017, 08:06 AM	#20
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,753 Trader Rating: (32) Feedback Score: 32 reviews	Heard your buddy was parting that RB/S13 you were building??

04-19-2018, 07:39 AM	#21
PartyCrashers Join Date: Oct 2017 Location: Michigan Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Sorry for the lack of updates I bought a new house and that has occupied most of my time. Finally got my car out of storage test fit my new wing and KBD side skirts. I'm very happy with how this custom wing came out never done anything like this before. I bought a random deck made custom low mount wing stands and bought some Battle Aero end plates tell me what you guys think! Picked up this set of gulf stitch wheels for a super deal 18x10.5 Been working hard on getting my new garage remodeled, but I found some time to install my wheels final mount my wing and test fit my rear diffuser. __________________ Party Crashers Drift

04-19-2018, 08:07 AM	#22
tuzzio Nissanaholic! Join Date: Oct 2013 Location: Western Mass. Posts: 2,254 Trader Rating: (3) Feedback Score: 3 reviews	If you want honest opinions, I don't care for the wing at all. Happy that 95% of the big wing trend died 3 years ago.

04-19-2018, 09:12 AM	#23
kneeecoo Zilvia Member Join Date: Jan 2016 Location: Chicago, IL Posts: 239 Trader Rating: (1) Feedback Score: 1 reviews	Not a fan of big wings but low mount is pretty cool imo. The wheels really help the wing fit. Looks like a do luck jzx wing which I wanted to throw on my coupe. Glad to see it looks really good! Sent from my SM-G955U using Tapatalk __________________ "How about bolf" @opehaha

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode