AC Clutch not engaging - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mikey444 · 04-29-2009, 08:04 PM

Hey guys. Now i know what you are thinking. Yes i did search but i haven't totally found the answer. So my ac clutch isnt engaging when i hit the switch, but the car idles up. Which lets me know the FICD is seeing power ( by the way if i'm not mistaken runs on the same wire as the compressor wire red/blue). FSM says that this red/blue wire should see a 12v source. Now my question is in order for the compressor to kick on it needs to be grounded. Does it get its ground signal from the triple pressure switch?

midnight_rex · 04-29-2009, 09:56 PM

what year car? make? model? engine?

Mikey444 · 04-29-2009, 11:15 PM

Well its a 1995 S14 sorry.

midnight_rex · 04-30-2009, 02:17 AM

its a stock s14?

the triple pressure switch closes the circuit to engage the clutch. you should try running a 12v source to the compressor wire to see if it engages. if so then the clutch is good.

check your AC relay in the fuse box in the engine bay and check fuse inside the car at the driver side footwell.

silentcovenant · 04-30-2009, 03:36 AM

Quote:

Originally Posted by midnight_rex

its a stock s14?

the triple pressure switch closes the circuit to engage the clutch. you should try running a 12v source to the compressor wire to see if it engages. if so then the clutch is good.

check your AC relay in the fuse box in the engine bay and check fuse inside the car at the driver side footwell.

I had a similar problem, it would start then immediately turn off and it would just constantly loop like that. Turns out it was my relay, I think. Haha sometimes it works, sometimes it doesn't. I just fiddle with the box and it works.

mxexux · 04-30-2009, 04:26 AM

This may help you.

Mikey444 · 04-30-2009, 09:39 AM

thanks a bunch guys. i tested the relay it works fine. i did see a popped fuse on the kick panel fuse box but i dont have a legend. so i jus repalced it anyway. today im gonna test the connector harness for the compressor to see if its geetting a 12v. other thing is also the compressor has no pressure. so imma try to jump off the compressor to get some freon in it.

Mikey444 · 04-30-2009, 04:06 PM

Ok well guys I tested the relay it works. No popped fuses. So i jumped the compressor and what do you now the clutch kicks on. So i'm guessing the pressure was to low. So I will jump the compressor just to get some freon in the system. See if the clutch kicks in on its on without jumping it. Then find out if i have a leak some where. Thanks guys for the help.

*fliprayzin240sx* · 04-30-2009, 05:40 PM

Dont jump the compressor again till you know you have your pressure back up. Theres a low pressure switch on the compressor that wont let you engage the compressor clutch, that keeps the compressor from getting damaged.

Mikey444 · 04-30-2009, 09:39 PM

So you are saying dont jump the compressor again until i fill it with freon and check the pressure?

supersayianjim · 07-03-2021, 08:52 AM

Bump, anyone has A color diagram? How do u wire in the drier wires?

mechanicalmoron · 07-03-2021, 12:20 PM

Quote:

Originally Posted by supersayianjim

Bump, anyone has A color diagram? How do u wire in the drier wires?

No, they'll have the same manual you should have, found on nicoclub.com. It's very complete, with every diagram you could possibly want, diagnostic flow charts, and all that.

I don't believe in the whole "use search and let the forums die" thing, but coming in decade old threads to ask stupid things that are not even about the AC, but about the FSM, which you should know about, is why people say that kind of thing. I mean, you've had an account here longer than me, and you want.... a picture with MS paint colored lines, or what?

Go find the diagram, see what you can, and then ask your actual question, when you know what it is.

04-29-2009, 08:04 PM	#1
Mikey444 Leaky Injector Join Date: Apr 2005 Location: Atlanta Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	AC Clutch not engaging Hey guys. Now i know what you are thinking. Yes i did search but i haven't totally found the answer. So my ac clutch isnt engaging when i hit the switch, but the car idles up. Which lets me know the FICD is seeing power ( by the way if i'm not mistaken runs on the same wire as the compressor wire red/blue). FSM says that this red/blue wire should see a 12v source. Now my question is in order for the compressor to kick on it needs to be grounded. Does it get its ground signal from the triple pressure switch?

04-30-2009, 05:40 PM	#9
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Dont jump the compressor again till you know you have your pressure back up. Theres a low pressure switch on the compressor that wont let you engage the compressor clutch, that keeps the compressor from getting damaged. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

07-03-2021, 08:52 AM	#11
supersayianjim Nissanaholic! Join Date: Jan 2010 Location: location X Posts: 1,807 Trader Rating: (10) Feedback Score: 10 reviews	Bump, anyone has A color diagram? How do u wire in the drier wires? __________________ http://www.240sxforums.com/forums/rb...ject-s-rb.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-29-2009, 09:56 PM	#2
midnight_rex Zilvia Member Join Date: Jul 2008 Location: houston, tx Age: 34 Posts: 239 Trader Rating: (1) Feedback Score: 1 reviews	what year car? make? model? engine?

04-29-2009, 11:15 PM	#3
Mikey444 Leaky Injector Join Date: Apr 2005 Location: Atlanta Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Well its a 1995 S14 sorry.

04-30-2009, 02:17 AM	#4
midnight_rex Zilvia Member Join Date: Jul 2008 Location: houston, tx Age: 34 Posts: 239 Trader Rating: (1) Feedback Score: 1 reviews	its a stock s14? the triple pressure switch closes the circuit to engage the clutch. you should try running a 12v source to the compressor wire to see if it engages. if so then the clutch is good. check your AC relay in the fuse box in the engine bay and check fuse inside the car at the driver side footwell.

04-30-2009, 04:26 AM	#6
mxexux Zilvia Junkie Join Date: Jun 2008 Location: SoCal 949 Posts: 363 Trader Rating: (9) Feedback Score: 9 reviews	This may help you.

04-30-2009, 09:39 AM	#7
Mikey444 Leaky Injector Join Date: Apr 2005 Location: Atlanta Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	thanks a bunch guys. i tested the relay it works fine. i did see a popped fuse on the kick panel fuse box but i dont have a legend. so i jus repalced it anyway. today im gonna test the connector harness for the compressor to see if its geetting a 12v. other thing is also the compressor has no pressure. so imma try to jump off the compressor to get some freon in it.

04-30-2009, 04:06 PM	#8
Mikey444 Leaky Injector Join Date: Apr 2005 Location: Atlanta Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Ok well guys I tested the relay it works. No popped fuses. So i jumped the compressor and what do you now the clutch kicks on. So i'm guessing the pressure was to low. So I will jump the compressor just to get some freon in the system. See if the clutch kicks in on its on without jumping it. Then find out if i have a leak some where. Thanks guys for the help.

04-30-2009, 09:39 PM	#10
Mikey444 Leaky Injector Join Date: Apr 2005 Location: Atlanta Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	So you are saying dont jump the compressor again until i fill it with freon and check the pressure?