Speedo not functioning. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

1320VR4 · 03-24-2013, 11:04 AM

Alright so when my car had the KA in it, the speedo worked perfectly. I swapped in my SR and it hasn't worked since. The previous owner told me I needed to replace the speed sensor. Picked one of those up off the forums and put it in today, no dice.

I also bought from Wiring Specialists the proper harness for an SR20 manual swapped convertible.

Being the gauge cluster worked the day I took the KA out, I can't imagine it just happened to take a crap at the exact moment I did a swap (and I may add the swap took a week, so it didn't have much down time)

Is it possible I missed plugging something in? Is there a fuse that takes care of just the speedo? Are there any wires I should specifically check?

Matt

tx240ss · 03-24-2013, 02:13 PM

did you change from auto to stick.. if so, they have different speed sensors. I have a convertible and still have a problem. I have a sr with a 96 s14 5 speed transmission.. it reads half of what it should...

1320VR4 · 03-24-2013, 02:59 PM

The car was swapped to manual prior to me purchasing it. When I owned it at first with the original KA engine, the speedo worked perfectly fine.

Swapped in the SR because I had an undiscoverable misfire, and the speedo doesn't work.

Basically, everything was perfect as a manual transmission, put the SR in, and it's no beans now.

KiLLeR2001 · 03-24-2013, 03:09 PM

Sounds like the wiring to the speed sensor got damaged somehow. You'll need to trace it from the sensor all the way up to see if there are any irregularities.

1320VR4 · 03-26-2013, 12:26 PM

I'd also like to add that sometimes my brake light on the dash stays on, I have to open and close my door a bunch of times and smack the dash to get it go off once in a while.

KiLLeR2001 · 03-26-2013, 05:41 PM

Hmm. Check the contact points in back of the gauge cluster. Guaranteed you have loose or weak connections back there.

KoukiMonsta · 03-26-2013, 06:19 PM

Quote:

Originally Posted by KiLLeR2001

Hmm. Check the contact points in back of the gauge cluster. Guaranteed you have loose or weak connections back there.

Whatcha talkin bout Willis?

You mean plugs into the cluster, screws into the tach/speedo etc, or the soft circuit portion?

I got some dumb cluster shit goin on myself.

dallasb53 · 03-26-2013, 08:44 PM

did you make sure to put the gear on the end of the speed sensor?

Refer to page 78 of the Electrical System (EL) in your FSM for troubleshooting procedure.

1320VR4 · 03-26-2013, 10:40 PM

Quote:

Originally Posted by dallasb53

did you make sure to put the gear on the end of the speed sensor?

Refer to page 78 of the Electrical System (EL) in your FSM for troubleshooting procedure.

yeah theres a gear on the speed sensor lol.

KiLLeR2001 · 03-27-2013, 12:05 AM

Quote:

Originally Posted by KoukiMonsta

Whatcha talkin bout Willis?

You mean plugs into the cluster, screws into the tach/speedo etc, or the soft circuit portion?

I got some dumb cluster shit goin on myself.

Soft circuit portion and the plugs that hold the bulbs sometimes lose contact from being old and worn. I've had it happen on my clusters, its not easy to diagnose unless you really inspect it well.

1320VR4 · 03-27-2013, 09:04 AM

I'll pull out the cluster and see if there's something up, the wires leading from the sensor seem fine. I'll pull the cluster itself out tomorrow and check 'er out

03-24-2013, 11:04 AM	#1
1320VR4 Zilvia Member Join Date: Mar 2012 Location: Vernon, NJ Age: 31 Posts: 269 Trader Rating: (4) Feedback Score: 4 reviews	Speedo not functioning. Alright so when my car had the KA in it, the speedo worked perfectly. I swapped in my SR and it hasn't worked since. The previous owner told me I needed to replace the speed sensor. Picked one of those up off the forums and put it in today, no dice. I also bought from Wiring Specialists the proper harness for an SR20 manual swapped convertible. Being the gauge cluster worked the day I took the KA out, I can't imagine it just happened to take a crap at the exact moment I did a swap (and I may add the swap took a week, so it didn't have much down time) Is it possible I missed plugging something in? Is there a fuse that takes care of just the speedo? Are there any wires I should specifically check? Matt __________________ 94 240SX, 93 Stealth, 92 VR4, 93 RX7 , 88 Yota

03-24-2013, 02:59 PM	#3
1320VR4 Zilvia Member Join Date: Mar 2012 Location: Vernon, NJ Age: 31 Posts: 269 Trader Rating: (4) Feedback Score: 4 reviews	The car was swapped to manual prior to me purchasing it. When I owned it at first with the original KA engine, the speedo worked perfectly fine. Swapped in the SR because I had an undiscoverable misfire, and the speedo doesn't work. Basically, everything was perfect as a manual transmission, put the SR in, and it's no beans now. __________________ 94 240SX, 93 Stealth, 92 VR4, 93 RX7 , 88 Yota

03-24-2013, 03:09 PM	#4
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	Sounds like the wiring to the speed sensor got damaged somehow. You'll need to trace it from the sensor all the way up to see if there are any irregularities. __________________

03-26-2013, 12:26 PM	#5
1320VR4 Zilvia Member Join Date: Mar 2012 Location: Vernon, NJ Age: 31 Posts: 269 Trader Rating: (4) Feedback Score: 4 reviews	I'd also like to add that sometimes my brake light on the dash stays on, I have to open and close my door a bunch of times and smack the dash to get it go off once in a while. __________________ 94 240SX, 93 Stealth, 92 VR4, 93 RX7 , 88 Yota

03-26-2013, 05:41 PM	#6
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	Hmm. Check the contact points in back of the gauge cluster. Guaranteed you have loose or weak connections back there. __________________

03-24-2013, 02:13 PM	#2
tx240ss Zilvia Member Join Date: Apr 2007 Location: Houston Posts: 176 Trader Rating: (5) Feedback Score: 5 reviews	did you change from auto to stick.. if so, they have different speed sensors. I have a convertible and still have a problem. I have a sr with a 96 s14 5 speed transmission.. it reads half of what it should...

03-26-2013, 08:44 PM	#8
dallasb53 Zilvia Member Join Date: Nov 2012 Location: Alabama Age: 30 Posts: 174 Trader Rating: (1) Feedback Score: 1 reviews	did you make sure to put the gear on the end of the speed sensor? Refer to page 78 of the Electrical System (EL) in your FSM for troubleshooting procedure.

03-27-2013, 09:04 AM	#11
1320VR4 Zilvia Member Join Date: Mar 2012 Location: Vernon, NJ Age: 31 Posts: 269 Trader Rating: (4) Feedback Score: 4 reviews	I'll pull out the cluster and see if there's something up, the wires leading from the sensor seem fine. I'll pull the cluster itself out tomorrow and check 'er out __________________ 94 240SX, 93 Stealth, 92 VR4, 93 RX7 , 88 Yota

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode