S14 Kouki FMIC W/ Factory Fogs - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rbpwrd240 · 08-21-2015, 02:19 PM

Hi,

I have been researching how to do a factory fog light and FMIC combo on my S14 Kouki. I noticed everyone that has an image of it done cleanly has the same intercooler.

Here are some links with pics.

This realy clean 200sx has the normal size intercooler I see and it retained its factory fogs.
http://www.sau.com.au/forums/topic/2...-kit-for-sale/

Spooled240 has something similar that you can see in his fog light write up here.
http://www.nicoclub.com/archives/s14...ht-switch.html

This Build for some ebay store has the same intercooler and again appears to have retained its factory fogs.
http://dragint.com/2014/06/28/240sx-...turbo-5-speed/

During my search for info I realized some people mention custom piping and Im fine with custom piping as long as I dont have to cut supports on the car. Others mention swept back fittings on the intercooler, I imagine these intercoolers from the links "may" have these swept back fittings for the piping.

Can anyone check these links and tell me what intercooler this is? Specificaly what dimension and if possible maker? It would also be helpful to know what the power limit of this intercooler is as it looks fairly small.

Thanks,
Alex R.

theultimatehero · 08-21-2015, 08:30 PM

Sorry I don't know the details of the IC in the pictures, but here is my shot at helping. You are probably going to have the best time doing one of these two:

1. Cut supports for the headlights and trunk latch to make room for the IC behind the bumper support. I did this on my car and I like how it fits. I have Zenki and no fogs, so I don't know what challenge it presents.

2. Go with a High Mount IC like the PBM variety. I personally think the HMIC is the best set up for an S14. A huge FMIC is usually overkill and with all of the piping it makes for slow throttle response. The major downside is you can't have AC with the HMIC.

rbpwrd240 · 08-21-2015, 11:52 PM

Quote:

Originally Posted by theultimatehero

Sorry I don't know the details of the IC in the pictures, but here is my shot at helping. You are probably going to have the best time doing one of these two:

1. Cut supports for the headlights and trunk latch to make room for the IC behind the bumper support. I did this on my car and I like how it fits. I have Zenki and no fogs, so I don't know what challenge it presents.

I dont mind cuting flush and boxing the frame rails but Id like to leave the headlight brackets. Im shooting for as little cutting on the car as possible other then the frame rails.

2. Go with a High Mount IC like the PBM variety. I personally think the HMIC is the best set up for an S14. A huge FMIC is usually overkill and with all of the piping it makes for slow throttle response. The major downside is you can't have AC with the HMIC.

I know lots of people jump to this as an anwser as it has been regurgitated around the forums but as you mentioned that intercooler doesnt allow you to use your ac condensor and requires modification of the headlight brackets and Radiator support!!! I want a/c and I want to be able to see the intercooler from the front of the car. Also this is about the most evasive way of mounting the intercooler Iv seen yet. Minus those folks that cut the middle section of their crash bar out. Hope they dont hit a pole. LOL

rbpwrd240 · 08-27-2015, 02:54 PM

No one?

Msg Length!!!

codyace · 08-29-2015, 06:21 PM

it' going to need some serious customization to make it work.

08-21-2015, 02:19 PM	#1
rbpwrd240 Zilvia FREAK! Join Date: Jun 2006 Location: San Antonio TEXAS Age: 35 Posts: 1,124 Trader Rating: (19) Feedback Score: 19 reviews	S14 Kouki FMIC W/ Factory Fogs Hi, I have been researching how to do a factory fog light and FMIC combo on my S14 Kouki. I noticed everyone that has an image of it done cleanly has the same intercooler. Here are some links with pics. This realy clean 200sx has the normal size intercooler I see and it retained its factory fogs. http://www.sau.com.au/forums/topic/2...-kit-for-sale/ Spooled240 has something similar that you can see in his fog light write up here. http://www.nicoclub.com/archives/s14...ht-switch.html This Build for some ebay store has the same intercooler and again appears to have retained its factory fogs. http://dragint.com/2014/06/28/240sx-...turbo-5-speed/ During my search for info I realized some people mention custom piping and Im fine with custom piping as long as I dont have to cut supports on the car. Others mention swept back fittings on the intercooler, I imagine these intercoolers from the links "may" have these swept back fittings for the piping. Can anyone check these links and tell me what intercooler this is? Specificaly what dimension and if possible maker? It would also be helpful to know what the power limit of this intercooler is as it looks fairly small. Thanks, Alex R.

08-29-2015, 06:21 PM	#5
codyace Post Whore! Join Date: Dec 2004 Location: Poconos, PA Age: 36 Posts: 8,030 Trader Rating: (58) Feedback Score: 58 reviews	it' going to need some serious customization to make it work. __________________ *Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information! Quest Alternator Conversions for SR20!* Check my Group Buy! Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-21-2015, 08:30 PM	#2
theultimatehero Zilvia Member Join Date: Apr 2013 Location: Vancouver, Canada Posts: 280 Trader Rating: (11) Feedback Score: 11 reviews	Sorry I don't know the details of the IC in the pictures, but here is my shot at helping. You are probably going to have the best time doing one of these two: 1. Cut supports for the headlights and trunk latch to make room for the IC behind the bumper support. I did this on my car and I like how it fits. I have Zenki and no fogs, so I don't know what challenge it presents. 2. Go with a High Mount IC like the PBM variety. I personally think the HMIC is the best set up for an S14. A huge FMIC is usually overkill and with all of the piping it makes for slow throttle response. The major downside is you can't have AC with the HMIC.

08-27-2015, 02:54 PM	#4
rbpwrd240 Zilvia FREAK! Join Date: Jun 2006 Location: San Antonio TEXAS Age: 35 Posts: 1,124 Trader Rating: (19) Feedback Score: 19 reviews	No one? Msg Length!!!