NY FS:sr20 t25,rb25 t3,s14 seatbelts,sr downpipe,,MSD SS, piping kit, CHEAP!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xnyc · 12-11-2011, 05:52 PM

Name: George
Phone: 347-783-9568 text/call
Location: Flushing NY 11355

As usual, multiple items get discount. Paypal address is [email protected] and please text me before sending payment.

Item: RB25DET Series 2 T3 turbo 45v4 (rb20 upgrade)
Price: $100 or $120 Shipped

Compressor wheel has some minor chips on the fins from when it was raining. Still spools fine. No shaft play in and out nor up and down. Purchased this with a syko elbow that i needed. good upgrade for rb20 running <300whp.

Item: SR20DET T25 turbo
Price: $sold

Was for my ka-t build. ditched the ka-t and got left with a bunch of ka-t parts. very minimal up and down play. no in and out play. Comes with free jgy oil feed and return lines.

Item: modified SR downpipe divorced
Price: $40/$60 shipped
Expanded the flange holes where it connects to the exhaust outlet and removed the bracket that goes to the exhaust brace on transmission mount. Can be welded back on. Still fully functional.

Item: Emance socketed and chipped ecu
Price: $70 or 80 Shipped

Ecu is socketed and chipped. Supposed to be tuned for t25/fmic/n60maf/sr370cc/intake/turboback. cannot verify tune so just selling this as a socketed ECU for cheap. Burn your own chip and manage your own tunes. ECU is the one all the way right.

Item: MSD Blaster SS with custom bracket
Price :$sold
Selling the MSD Blaster SS unit with a custom welded bracket for bolt-in on s13. This boosts the spark stronger than your factory ignition coil. Comes with a free set of used MSD wires and the transistor. Direct bolt-in in place of the factory coil for s13.

Item: OBX Short throw shifter
Price: $30/40shipped
Used sts from my s13 ka trans. Has some marks just above the pivot from previous owner shifting hard. Not bent and still does wat it needs to do.

Item: 2.5" black intercooler piping kit
Price: $60 picked up/$80 shipped
Comes with (6) silicone 3ply couplers, (8) t-band clamps, and piping pictured.

Item: pair of black s14 manual seatbelts
Price: $50/$60 shipped

pair of s14 manual seatbelts in good condition. was intended for my s13 but now im lazy and plan to keep the auto seatbelts. retract and pull out no problems. locks up properly when it should.

driftr240sx · 12-11-2011, 06:04 PM

Grr just bought a no name t25 for the same price.... Glws great prices!

negrosx13 · 12-11-2011, 06:42 PM

pm me info on the downpipe

xnyc · 12-12-2011, 01:16 PM

bump for 45v4 turbo and black s14 seatbelts. i know someones looking for one of these.

12-11-2011, 05:52 PM	#1
xnyc Zilvia Member Join Date: Dec 2005 Location: flooshing Posts: 231 Trader Rating: (9) Feedback Score: 9 reviews	FS:sr20 t25,rb25 t3,s14 seatbelts,sr downpipe,,MSD SS, piping kit, CHEAP!! Name: George Phone: 347-783-9568 text/call Location: Flushing NY 11355 As usual, multiple items get discount. Paypal address is [email protected] and please text me before sending payment. Item: RB25DET Series 2 T3 turbo 45v4 (rb20 upgrade) Price: $100 or $120 Shipped Compressor wheel has some minor chips on the fins from when it was raining. Still spools fine. No shaft play in and out nor up and down. Purchased this with a syko elbow that i needed. good upgrade for rb20 running <300whp. Item: SR20DET T25 turbo Price: $sold Was for my ka-t build. ditched the ka-t and got left with a bunch of ka-t parts. very minimal up and down play. no in and out play. Comes with free jgy oil feed and return lines. Item: modified SR downpipe divorced Price: $40/$60 shipped Expanded the flange holes where it connects to the exhaust outlet and removed the bracket that goes to the exhaust brace on transmission mount. Can be welded back on. Still fully functional. Item: Emance socketed and chipped ecu Price: $70 or 80 Shipped Ecu is socketed and chipped. Supposed to be tuned for t25/fmic/n60maf/sr370cc/intake/turboback. cannot verify tune so just selling this as a socketed ECU for cheap. Burn your own chip and manage your own tunes. ECU is the one all the way right. Item: MSD Blaster SS with custom bracket Price :$sold Selling the MSD Blaster SS unit with a custom welded bracket for bolt-in on s13. This boosts the spark stronger than your factory ignition coil. Comes with a free set of used MSD wires and the transistor. Direct bolt-in in place of the factory coil for s13. Item: OBX Short throw shifter Price: $30/40shipped Used sts from my s13 ka trans. Has some marks just above the pivot from previous owner shifting hard. Not bent and still does wat it needs to do. Item: 2.5" black intercooler piping kit Price: $60 picked up/$80 shipped Comes with (6) silicone 3ply couplers, (8) t-band clamps, and piping pictured. Item: pair of black s14 manual seatbelts Price: $50/$60 shipped pair of s14 manual seatbelts in good condition. was intended for my s13 but now im lazy and plan to keep the auto seatbelts. retract and pull out no problems. locks up properly when it should. Last edited by xnyc; 12-12-2011 at 11:58 PM..

12-11-2011, 06:42 PM	#3
negrosx13 Zilvia Addict Join Date: Feb 2009 Location: Houston,tx Posts: 948 Trader Rating: (14) Feedback Score: 14 reviews	pm me info on the downpipe __________________ MORE BACON STRIPS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-11-2011, 06:04 PM	#2
driftr240sx Zilvia Member Join Date: Feb 2010 Location: Michigan Age: 29 Posts: 177 Trader Rating: (8) Feedback Score: 8 reviews	Grr just bought a no name t25 for the same price.... Glws great prices!

12-12-2011, 01:16 PM	#4
xnyc Zilvia Member Join Date: Dec 2005 Location: flooshing Posts: 231 Trader Rating: (9) Feedback Score: 9 reviews	bump for 45v4 turbo and black s14 seatbelts. i know someones looking for one of these.