5 lug conversion on 95 s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

c1L · 07-23-2012, 10:04 PM

240SX S14 95-98 5-LUG CONVERSION KIT BEARING FRONT & REAR HUB 4X114.3 TO 5X114.3 | eBay

Has anyone ever ran these? all i need is s14 rotors besides this?

libz · 07-25-2012, 10:50 AM

anyone?? maybe a different route to go for the s14 5 lug conversion??

zooopreme · 07-25-2012, 11:40 AM

You get what you paid for. Ebay is mostly a miss. But some people get lucky & their money's worth.

S14 front bearings cannot be replaced like S13 bearings can. The entire hub would have to be replaced. And in terms of money, if you keep replacing with bullshit parts, you will be spending as much as you could have been spending for OEM fronts.

As for the rears, it's not a bad deal considering bearings are interchangeable between S13/S14/NA Z32 so finding used ones or new ones for cheap isn't all that hard. I guess all you would have to worry about is the quality of the studs.

All in all, you get what you paid for. If you got your money's worth, awesome. Go OEM & be assured quality.

s14skyvia · 07-25-2012, 02:56 PM

I'm currently running them and if i could do it over i will go oem. The rears don't fit as snugg but can be solve by tightening the axle end bolt tightly,the fronts have a little roar but its not that bad and it only noticible at low speeds. oem is the best route but these will do

libz · 07-25-2012, 03:55 PM

what parts will be needed for front and rear? and can i use any year s13 s14 parts?

zooopreme · 07-26-2012, 11:16 AM

S14 doesn't need "conversion" parts. 5 lug S14 parts bolt on to 4 lug S14 parts.

You're better off using used OEM hubs than ebay parts. S13/S14/NA Z32 rears are interchangeable. Fronts are not. S14 & Z32 came with factory 5 lug (US).

eek · 07-26-2012, 12:15 PM

You will also need a set of 5 lug rims. Use the SEARCH function, its been covered MORE than a few hundred times... I promise.

libz · 07-26-2012, 12:24 PM

^^ all the searching related directly to s13's because i guess the 95' 4 lugs are rare. and im not really that good with these cars yet. i have 5 lug wheels and trying to figure out the best way to change to 5 lug without it being a cheap or crappy way of doing things

07-23-2012, 10:04 PM	#1
c1L Leaky Injector Join Date: Apr 2011 Location: Long Island, NY Age: 31 Posts: 107 Trader Rating: (1) Feedback Score: 1 reviews	5 lug conversion on 95 s14 240SX S14 95-98 5-LUG CONVERSION KIT BEARING FRONT & REAR HUB 4X114.3 TO 5X114.3 \| eBay Has anyone ever ran these? all i need is s14 rotors besides this?

07-25-2012, 11:40 AM	#3
zooopreme Post Whore! Join Date: Apr 2010 Location: Southern California Posts: 2,772 Trader Rating: (38) Feedback Score: 38 reviews	You get what you paid for. Ebay is mostly a miss. But some people get lucky & their money's worth. S14 front bearings cannot be replaced like S13 bearings can. The entire hub would have to be replaced. And in terms of money, if you keep replacing with bullshit parts, you will be spending as much as you could have been spending for OEM fronts. As for the rears, it's not a bad deal considering bearings are interchangeable between S13/S14/NA Z32 so finding used ones or new ones for cheap isn't all that hard. I guess all you would have to worry about is the quality of the studs. All in all, you get what you paid for. If you got your money's worth, awesome. Go OEM & be assured quality. __________________ For Sale #1 \| For Sale #2

07-26-2012, 11:16 AM	#6
zooopreme Post Whore! Join Date: Apr 2010 Location: Southern California Posts: 2,772 Trader Rating: (38) Feedback Score: 38 reviews	S14 doesn't need "conversion" parts. 5 lug S14 parts bolt on to 4 lug S14 parts. You're better off using used OEM hubs than ebay parts. S13/S14/NA Z32 rears are interchangeable. Fronts are not. S14 & Z32 came with factory 5 lug (US). __________________ For Sale #1 \| For Sale #2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-25-2012, 10:50 AM	#2
libz Join Date: Jul 2011 Location: Long Island, NY Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	anyone?? maybe a different route to go for the s14 5 lug conversion??

07-25-2012, 02:56 PM	#4
s14skyvia Zilvia Member Join Date: Jul 2012 Location: Tampa FL Posts: 242 Trader Rating: (14) Feedback Score: 14 reviews	I'm currently running them and if i could do it over i will go oem. The rears don't fit as snugg but can be solve by tightening the axle end bolt tightly,the fronts have a little roar but its not that bad and it only noticible at low speeds. oem is the best route but these will do

07-25-2012, 03:55 PM	#5
libz Join Date: Jul 2011 Location: Long Island, NY Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	what parts will be needed for front and rear? and can i use any year s13 s14 parts?

07-26-2012, 12:15 PM	#7
eek Zilvia FREAK! Join Date: Feb 2004 Location: California Age: 40 Posts: 1,025 Trader Rating: (29) Feedback Score: 29 reviews	You will also need a set of 5 lug rims. Use the SEARCH function, its been covered MORE than a few hundred times... I promise.

07-26-2012, 12:24 PM	#8
libz Join Date: Jul 2011 Location: Long Island, NY Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	^^ all the searching related directly to s13's because i guess the 95' 4 lugs are rare. and im not really that good with these cars yet. i have 5 lug wheels and trying to figure out the best way to change to 5 lug without it being a cheap or crappy way of doing things