Sti injector adapters? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Sil#2 · 10-20-2011, 09:37 PM

Trying to find some adapters for sti injectors cause I just hate wires. Searched and all the links are now dead. EBay doesn't state these specific adapters. Anyone know where I can still get these? Thanks.

waxball88 · 10-20-2011, 10:21 PM

Buy STi injector plugs and replace stock plugs.... I believe the are denso "ovular" connectors. A lot of the subies use the same clips go down to u-pull and take clips off a car that matches.

Mitsubayati · 10-20-2011, 10:31 PM

I was wondering this same thing, because I didn't want to splice in the plugs I have just to change them for something that works with stock connectors later haha. Is there any adapter available that plugs into the oem harness and sti injectors?

waxball88 · 10-20-2011, 10:33 PM

I don't believe so.....Its 8 wires.....solder and shrink them
Cut them off and repeat for different injectors.
I believe my plugs were off a legacy but don't quote me.

GroundPerformance · 10-20-2011, 11:12 PM

You may be able to depin the connector and move it to the STI injector connector for a cleaner conversion. I will trying this myself since I'm also using the yellow STI side feed injectors on the SR motor I'm working on. GL!

lok · 10-21-2011, 06:53 AM

Quote:

Originally Posted by GroundPerformance

You may be able to depin the connector and move it to the STI injector connector for a cleaner conversion. I will trying this myself since I'm also using the yellow STI side feed injectors on the SR motor I'm working on. GL!

This doesnt work.

Only the Denso top feed pins and the subaru side feed pins interchange on the connectors.

fullthrottle · 10-21-2011, 06:58 AM

I just jammed sr20 clips onto them upside down

waxball88 · 10-21-2011, 07:37 AM

Quote:

Originally Posted by lok

This doesnt work.

Only the Denso top feed pins and the subaru side feed pins interchange on the connectors.

The pins on my injecors are in there REALLY fucking tight.

gretz · 10-21-2011, 07:40 AM

Shave the "tabs" off the side of the injectors (a dremel or W.H.Y) and the stock sr caps should slide right on...

10-20-2011, 09:37 PM	#1
Sil#2 Zilvia Member Join Date: Mar 2011 Location: NYC Posts: 190 Trader Rating: (1) Feedback Score: 1 reviews	Sti injector adapters? Trying to find some adapters for sti injectors cause I just hate wires. Searched and all the links are now dead. EBay doesn't state these specific adapters. Anyone know where I can still get these? Thanks.

10-20-2011, 10:31 PM	#3
Mitsubayati Zilvia FREAK! Join Date: Aug 2007 Location: The Dro Posts: 1,424 Trader Rating: (18) Feedback Score: 18 reviews	I was wondering this same thing, because I didn't want to splice in the plugs I have just to change them for something that works with stock connectors later haha. Is there any adapter available that plugs into the oem harness and sti injectors? __________________

10-20-2011, 11:12 PM	#5
GroundPerformance Zilvia FREAK! Join Date: Oct 2008 Location: Socal Posts: 1,477 Trader Rating: (44) Feedback Score: 44 reviews	You may be able to depin the connector and move it to the STI injector connector for a cleaner conversion. I will trying this myself since I'm also using the yellow STI side feed injectors on the SR motor I'm working on. GL! __________________ SoCal KA24DET/KA24ET Owners << Join the FB Group >>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-20-2011, 10:21 PM	#2
waxball88 Zilvia FREAK! Join Date: Jun 2009 Location: Gainesville Posts: 1,061 Trader Rating: (9) Feedback Score: 9 reviews	Buy STi injector plugs and replace stock plugs.... I believe the are denso "ovular" connectors. A lot of the subies use the same clips go down to u-pull and take clips off a car that matches.

10-20-2011, 10:33 PM	#4
waxball88 Zilvia FREAK! Join Date: Jun 2009 Location: Gainesville Posts: 1,061 Trader Rating: (9) Feedback Score: 9 reviews	I don't believe so.....Its 8 wires.....solder and shrink them Cut them off and repeat for different injectors. I believe my plugs were off a legacy but don't quote me.

10-21-2011, 06:58 AM	#7
fullthrottle Zilvia Addict Join Date: Apr 2009 Location: Saint Louis, MO Age: 34 Posts: 661 Trader Rating: (13) Feedback Score: 13 reviews	I just jammed sr20 clips onto them upside down

10-21-2011, 07:40 AM	#9
gretz Leaky Injector Join Date: Apr 2008 Location: Alberta Age: 35 Posts: 148 Trader Rating: (1) Feedback Score: 1 reviews	Shave the "tabs" off the side of the injectors (a dremel or W.H.Y) and the stock sr caps should slide right on...