RB engine with multiple restrictors - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rustable15 · 05-19-2021, 01:27 AM

I have an rb25 and plan on putting in 2 1.5mm restrictors into the block but is it possible to go with a smaller restrictor in the future once I go to a different oil pump?

PoorMans180SX · 05-19-2021, 07:55 AM

Generally you peen the hole a bit so the restrictor can't come out. You're probably better off installing them once. Why would you change them when going to a different pump? Does the new pump generate more pressure? If so, you can simulate it by shimming the relief spring.

jr_ss · 05-19-2021, 12:22 PM

Quote:

Originally Posted by PoorMans180SX

Generally you peen the hole a bit so the restrictor can't come out. You're probably better off installing them once. Why would you change them when going to a different pump? Does the new pump generate more pressure? If so, you can simulate it by shimming the relief spring.

There are various pumps that increase oil volume over others.

http://www.skylife4ever.com/2014/08/...-pump.html?m=1

There is a chart out there that recommends specific restrictors with specific pumps based on your setup.

smoked240 · 05-27-2021, 07:50 PM

Quote:

Originally Posted by PoorMans180SX

Generally you peen the hole a bit so the restrictor can't come out. You're probably better off installing them once. Why would you change them when going to a different pump? Does the new pump generate more pressure? If so, you can simulate it by shimming the relief spring.

What would be considered too much pressure?

I have an N1 pump with spool import gears and 1 oil restrictor blocked. the other is left stock.

It's been awhile but I believe I was seeing 7-9bar oil pressure on a cold start and it gets over 7bar on WOT if I remember correctly, it's been a few years.

PoorMans180SX · 05-28-2021, 06:00 AM

That sounds like good pressure for an RB to me.

smoked240 · 05-28-2021, 10:01 PM

Good to know! Remembering now I also went to the +.001 bearings on rods and mains.

05-19-2021, 01:27 AM	#1
rustable15 Join Date: Sep 2020 Location: San Diego Age: 32 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	RB engine with multiple restrictors I have an rb25 and plan on putting in 2 1.5mm restrictors into the block but is it possible to go with a smaller restrictor in the future once I go to a different oil pump?

05-19-2021, 07:55 AM	#2
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,430 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	Generally you peen the hole a bit so the restrictor can't come out. You're probably better off installing them once. Why would you change them when going to a different pump? Does the new pump generate more pressure? If so, you can simulate it by shimming the relief spring. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

05-28-2021, 06:00 AM	#5
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,430 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	That sounds like good pressure for an RB to me. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

05-28-2021, 10:01 PM	#6
smoked240 Zilvia FREAK! Join Date: Jun 2010 Location: North Dakota Age: 30 Posts: 1,066 Trader Rating: (4) Feedback Score: 4 reviews	Good to know! Remembering now I also went to the +.001 bearings on rods and mains. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode