Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 02-13-2009, 12:34 AM   #1
ixfxi
Post Whore!
 
ixfxi's Avatar
 
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 79
Posts: 5,923
Trader Rating: (3)
ixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfection
Feedback Score: 3 reviews
Installation: S13 Kouki (96-98) 180SX Front Lip

Hey bastards..........

I believe I misplaced the instructions for the kouki lip, not that I understood them anyway. I've managed to install the lip pretty secure at the moment, but I still have some extra hardware that I am curious how they attach to the vehicle.. meaning, the OEM-way.. not the stupid-i-zip-tie-my-pants-closed-way.

Anyone here have proper instructions or translated the OE instructions by any chance? Also, I am looking for installation instructions for the 91-94 chuki side-skirts. I've installed both, I'm just wanting to verify my work and see if I've missed anything.

Sigh........


I have a feeling of hopelessness posting this thread on this forum. For some reason, I dont think any of you guys care how your bumpers are attached, let alone your aero. Please, surprise me. Russ, anyone?
ixfxi is offline   Reply With Quote
Sponsored Links
Old 02-13-2009, 07:20 AM   #2
projectRDM
Post Whore!
 
projectRDM's Avatar
 
Join Date: Dec 2002
Location: Atlanta
Age: 47
Posts: 13,812
Trader Rating: (12)
projectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfection
Feedback Score: 12 reviews
I will finally be installing one in a few weeks but have no firsthand knowledge as of yet. The guy is waiting for paintwork before we start hanging aero parts.
__________________
FORMERLY R240NA

Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com
projectRDM is offline   Reply With Quote
Old 02-13-2009, 12:10 PM   #3
ixfxi
Post Whore!
 
ixfxi's Avatar
 
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 79
Posts: 5,923
Trader Rating: (3)
ixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfection
Feedback Score: 3 reviews
Quote:
Originally Posted by projectRDM View Post
I will finally be installing one in a few weeks but have no firsthand knowledge as of yet. The guy is waiting for paintwork before we start hanging aero parts.
i advise doing a dry fit for the front lip, you need to mark the holes before painting otherwise you'll have to create holes through a painted bumper (fail).

the studs that protrude off of the lip that insert through the bumper are not all equally strong. One of them at the far end already broke, its very shitty design for such an expensive piece! such is life, at least its better than the aftermarket shit being sold.

as for the screw response, i'm going to pretend you never posted. actually, if a moderator wants to be nice please remove nonsensical/useless posts from this thread, because I'de like it to be archived with factual info, not stupid shit.

here is a pic of the car as it is now, hovering like dahlsim.


and here is a pic for all you fruitcakes doing rattlecan/rollerjobs..


russ, if you can post pics of the instruction manual and the hardware that comes with the lip. I'll need a copy of the manual and would like to verify that we have the same qty of hardware pieces.

mike / clearcorners.com (you know, someone who actually likes to do things THE RIGHT WAY)
ixfxi is offline   Reply With Quote
Old 02-13-2009, 12:19 PM   #4
ThatGuy
Admin Asshole
 
ThatGuy's Avatar
 
Join Date: Mar 2002
Location: Retired
Age: 41
Posts: 20,394
Trader Rating: (0)
ThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfection
Feedback Score: 0 reviews
Even though I (unfortunately) resemble that rattlecan remark at this current time, your use of a classic Street Fighter reference in your cars description has swayed me.

Useless posts being trimmed now...
__________________
"Speak softly,..." -Pres. Teddy Roosevelt
"Be polite, be professional, ..." -Gen. James Mattis
ThatGuy is offline   Reply With Quote
Old 02-13-2009, 12:34 PM   #5
Brian
Post Whore!
 
Brian's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 12,840
Trader Rating: (54)
Brian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfection
Feedback Score: 54 reviews
Mike, I have the instructions and everything at home.

I can TRY to scan it up maybe tonight, maybe next week.

I haven't installed mine yet either. I don't want to do it ghetto, but there are so many brackets and whatnot.

I don't read J, but I'll put it up still....
__________________
http://bhworld.wordpress.com/
Brian is offline   Reply With Quote
Old 02-13-2009, 12:35 PM   #6
projectRDM
Post Whore!
 
projectRDM's Avatar
 
Join Date: Dec 2002
Location: Atlanta
Age: 47
Posts: 13,812
Trader Rating: (12)
projectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfection
Feedback Score: 12 reviews
Quote:
Originally Posted by ixfxi View Post
i advise doing a dry fit for the front lip, you need to mark the holes before painting otherwise you'll have to create holes through a painted bumper (fail).

the studs that protrude off of the lip that insert through the bumper are not all equally strong. One of them at the far end already broke, its very shitty design for such an expensive piece! such is life, at least its better than the aftermarket shit being sold.


russ, if you can post pics of the instruction manual and the hardware that comes with the lip. I'll need a copy of the manual and would like to verify that we have the same qty of hardware pieces.

mike / clearcorners.com (you know, someone who actually likes to do things THE RIGHT WAY)
It's similar to the JDM Kouki front lip for S14s then. That lip mounts through the bumper cover, the same guy I'm fitting the S13 Type X kit for also has a Kouki S14 which I sadly didn't get ahold of before someone else did the aero fitting. They drilled the bumper cover but made the holes too small, once tightened the bumper stress fractured at each point and not only looks horrid, the lip isn't flush since the protrusions on it are tapered. I don't even want to discuss the sideskirt installation.
I'm going to be redoing it after we get the S13 ready and in for paint. Soon as he comes over I'll print off the lip pages and send them to you.
__________________
FORMERLY R240NA

Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com
projectRDM is offline   Reply With Quote
Old 02-13-2009, 12:40 PM   #7
Brian
Post Whore!
 
Brian's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 12,840
Trader Rating: (54)
Brian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfection
Feedback Score: 54 reviews
Also, Russ/Mike.

Do you guys have that black "piping" that I assume you are supposed to put over the top part of the lip where it would meet the actual bumper?

Looks like it isn't on yours, Mike.


So many "U" brackets and whatnot...

and of course they come with the paper templates for hole drilling...
__________________
http://bhworld.wordpress.com/
Brian is offline   Reply With Quote
Old 02-13-2009, 01:05 PM   #8
ixfxi
Post Whore!
 
ixfxi's Avatar
 
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 79
Posts: 5,923
Trader Rating: (3)
ixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfection
Feedback Score: 3 reviews
I did not use the black-piping (weatherstripping) because it just seems excessive. I still have it and I am still debating whether or not to use it. The reason I dont want to use it is because the black lines create a visual gap or separation between the body panels. I even have the weatherstripping for the over-fenders which I dont think I will use either. If you look at the JDM-rice car, I didnt like how you could see the black lines from afar.

I plan on installing clear bra on the contact areas to prevent direct contact and act as an insulator, especially on the overfender contact areas since they get a lot of wear.

To give you a heads up, the U-brackets appear to be spacers for the outer most sections of the lip, near the front wheel arch. The rest of the hardware is much like you would find on a G35, the "screw-clips" as I call them clip onto the lower section of the bumper and allow you to secure the lip with 10mm machine screws.

I feel like we're a dying or near-extinct species. Its bad enough folks are too cheap to spend money on a nice factory lip for their car, but when they do... then they give us advice to ZIP TIE the shit on. Seriously now................ what the fuck is wrong with people.
ixfxi is offline   Reply With Quote
Old 02-13-2009, 01:09 PM   #9
Brian
Post Whore!
 
Brian's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 12,840
Trader Rating: (54)
Brian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfection
Feedback Score: 54 reviews
That was the other half of my question...

Do you paint the stripping or leave it black.
I seem to have it on the OEM rears too, and....well, they were black to begin with, so I didn't know if the strips were painted too.


at any rate I have no idea when I can scan it.... maybe I'll just do camera phone pictures.
__________________
http://bhworld.wordpress.com/
Brian is offline   Reply With Quote
Old 02-13-2009, 01:13 PM   #10
ixfxi
Post Whore!
 
ixfxi's Avatar
 
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 79
Posts: 5,923
Trader Rating: (3)
ixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfection
Feedback Score: 3 reviews
im not sure i understand, what do you mean paint the stripping? i didnt use the weatherstripping.
ixfxi is offline   Reply With Quote
Old 02-13-2009, 01:16 PM   #11
projectRDM
Post Whore!
 
projectRDM's Avatar
 
Join Date: Dec 2002
Location: Atlanta
Age: 47
Posts: 13,812
Trader Rating: (12)
projectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfection
Feedback Score: 12 reviews
Same stuff is used on Zenki sideskirts, it's basically a weatherstrip seal to keep the skirt from rubbing the body. On darker colored cars it looks alright but on lighter colors it stands out way too much, looks like someone took a picture and then traced the line with a black marker. I don't use it for most of my installs.
__________________
FORMERLY R240NA

Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Last edited by projectRDM; 03-14-2009 at 08:57 AM..
projectRDM is offline   Reply With Quote
Old 02-13-2009, 01:37 PM   #12
ixfxi
Post Whore!
 
ixfxi's Avatar
 
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 79
Posts: 5,923
Trader Rating: (3)
ixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfection
Feedback Score: 3 reviews
you know, one thing thats always bugged me about our cars is the hood. i know its a random question, but has anyone here EVER heard of a shop capable of fabricating an ALUMINUM hood for your cars?

fuck FRP, shit is too fragile and I dont like race-latches, I still want to use the factory release. i am just curious if anyone knows of an alum hood or someone who makes custom alum hoods.
ixfxi is offline   Reply With Quote
Old 02-13-2009, 01:48 PM   #13
Brian
Post Whore!
 
Brian's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 12,840
Trader Rating: (54)
Brian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfection
Feedback Score: 54 reviews
Quote:
Originally Posted by ixfxi View Post
im not sure i understand, what do you mean paint the stripping? i didnt use the weatherstripping.
I should have wrote it better.

I was speaking in generalities.... not you in particular.

Generally speaking, do people paint the stripping?

That's what I meant.
__________________
http://bhworld.wordpress.com/
Brian is offline   Reply With Quote
Old 02-13-2009, 01:51 PM   #14
ixfxi
Post Whore!
 
ixfxi's Avatar
 
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 79
Posts: 5,923
Trader Rating: (3)
ixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfection
Feedback Score: 3 reviews
No, i cant imagine anyone painting a rubber piece of weatherstripping because rubber is next to near impossible for paint to adhere to. COF is very low.
ixfxi is offline   Reply With Quote
Old 02-13-2009, 01:53 PM   #15
Brian
Post Whore!
 
Brian's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 12,840
Trader Rating: (54)
Brian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfection
Feedback Score: 54 reviews
Ah, very well.

I didn't know it was more rubber like or plastic like.... didn't really examine it.

I might just toss mine in the garbage.


We'll see.
__________________
http://bhworld.wordpress.com/
Brian is offline   Reply With Quote
Old 02-13-2009, 01:55 PM   #16
Om1kron
Post Whore!
 
Om1kron's Avatar
 
Join Date: Sep 2004
Location: Simi Valley, CA
Age: 40
Posts: 6,879
Trader Rating: (15)
Om1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant futureOm1kron has a brilliant future
Feedback Score: 15 reviews
Quote:
Originally Posted by ixfxi View Post
you know, one thing thats always bugged me about our cars is the hood. i know its a random question, but has anyone here EVER heard of a shop capable of fabricating an ALUMINUM hood for your cars?

fuck FRP, shit is too fragile and I dont like race-latches, I still want to use the factory release. i am just curious if anyone knows of an alum hood or someone who makes custom alum hoods.

This is a how to thread, if someone fabbed an aluminum hood, they would have to put the bracing on the bottom of it so it didn't buckle all to hell when you shut your hood. which would make it seriously no different than using the steel hood.
__________________
Wayne
Om1kron is offline   Reply With Quote
Old 02-13-2009, 02:45 PM   #17
ixfxi
Post Whore!
 
ixfxi's Avatar
 
Join Date: Apr 2006
Location: bangin on my chest Account: BANNED #fucksupreme
Age: 79
Posts: 5,923
Trader Rating: (3)
ixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfectionixfxi is close to perfection
Feedback Score: 3 reviews
Quote:
Originally Posted by Om1kron View Post
This is a how to thread, if someone fabbed an aluminum hood, they would have to put the bracing on the bottom of it so it didn't buckle all to hell when you shut your hood. which would make it seriously no different than using the steel hood.
miata uses an aluminum hood with aluminum undersiding. the point is, someone needs to create a replica of the steel hood but out of aluminum.

get my point, vin?

and yes, i know its a how-to thread.. its my how-to thread. i just figure i'de do a two-in-one and see if anyone had an answer to my random question. though, i dont think we'll ever see an alum hood for the S13 this lifetime. few people would care about details like that.. but it doesnt hurt to pray.
ixfxi is offline   Reply With Quote
Old 02-13-2009, 08:46 PM   #18
Brian
Post Whore!
 
Brian's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 12,840
Trader Rating: (54)
Brian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfection
Feedback Score: 54 reviews
Mike,







__________________
http://bhworld.wordpress.com/
Brian is offline   Reply With Quote
Old 02-13-2009, 10:23 PM   #19
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
i speak j but those pics are pretty self explanatory imo

if you need help translating any of it just ask

also the manual refers to it as a front protector not a lip haha
lflkajfj12123 is offline   Reply With Quote
Old 02-13-2009, 10:27 PM   #20
Brian
Post Whore!
 
Brian's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 12,840
Trader Rating: (54)
Brian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfection
Feedback Score: 54 reviews
pic 5 and pic 6.

three dots D, F, and E.

then next photo shows it as a big hole.

Am I supposed to drill a LARGE hole, or what?

That was the main thing I don't understand.

I see HOW the end result is, but how do I drill that large hole?
__________________
http://bhworld.wordpress.com/
Brian is offline   Reply With Quote
Old 02-13-2009, 10:41 PM   #21
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
it says to drill holes d and e then f with a holesaw

d and e ø3--> ø8

f ø3--> ø24



only time i've ever used that was for installing plumbing through wood
lflkajfj12123 is offline   Reply With Quote
Old 02-13-2009, 11:19 PM   #22
Brian
Post Whore!
 
Brian's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 12,840
Trader Rating: (54)
Brian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfectionBrian is close to perfection
Feedback Score: 54 reviews
8mm and 24mm?


I think if I wanted to, I could say SCREW that center hole saw hole and instead, just drill those other 2 holes and put a longer bolt though there and a regular nut.

The hole saw hole is just to hold the clip on guy with the nut atatched...
__________________
http://bhworld.wordpress.com/
Brian is offline   Reply With Quote
Old 02-13-2009, 11:33 PM   #23
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
8mm 24 mm yes

and of course you could do that just like that.. you could just ziptie it on too lol

mike wants the right way though

and by chance anyone have the kouki aero part numbers lip, bumper parts, skirts, valences, wing

Last edited by lflkajfj12123; 02-14-2009 at 12:37 AM..
lflkajfj12123 is offline   Reply With Quote
Old 02-14-2009, 10:48 AM   #24
projectRDM
Post Whore!
 
projectRDM's Avatar
 
Join Date: Dec 2002
Location: Atlanta
Age: 47
Posts: 13,812
Trader Rating: (12)
projectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfectionprojectRDM is close to perfection
Feedback Score: 12 reviews
Quote:
Originally Posted by s0apgun View Post
8mm 24 mm yes

and of course you could do that just like that.. you could just ziptie it on too lol

mike wants the right way though

and by chance anyone have the kouki aero part numbers lip, bumper parts, skirts, valences, wing
www.nismoparts.com has all the OE numbers, you have to add the item to your cart for it to display but they're all correct.
__________________
FORMERLY R240NA

Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com
projectRDM is offline   Reply With Quote
Old 02-14-2009, 12:18 PM   #25
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
ahh okay thank you for that

because i looked on their site and didn't see them before
lflkajfj12123 is offline   Reply With Quote
Old 03-13-2009, 10:47 PM   #26
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
bump

The Nismo Shop : West Covina Nissan : Nissan JDM Kouki 180sx Front Bumper Components

for the front bumper are the extension brackets necessary or are they another pointless nissan clip?

i just want to get away with front bumper and extensions

sorry if this goes against your ethics mike
lflkajfj12123 is offline   Reply With Quote
Old 03-13-2009, 11:01 PM   #27
5t341tH
Post Whore!
 
5t341tH's Avatar
 
Join Date: Jun 2006
Location: socal (Huntington Beach)
Age: 33
Posts: 2,776
Trader Rating: (14)
5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute
Feedback Score: 14 reviews
Send a message via AIM to 5t341tH
Quote:
Originally Posted by s0apgun View Post
bump

The Nismo Shop : West Covina Nissan : Nissan JDM Kouki 180sx Front Bumper Components

for the front bumper are the extension brackets necessary or are they another pointless nissan clip?

i just want to get away with front bumper and extensions

sorry if this goes against your ethics mike
yea u need em. they go inside the bumper and attach to the fender/extensions
__________________

lexus baby
5t341tH is offline   Reply With Quote
Old 03-13-2009, 11:27 PM   #28
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
double sided super 3m tape won't do the job? LOL

that stuff is like cement
lflkajfj12123 is offline   Reply With Quote
Old 03-14-2009, 12:24 AM   #29
5t341tH
Post Whore!
 
5t341tH's Avatar
 
Join Date: Jun 2006
Location: socal (Huntington Beach)
Age: 33
Posts: 2,776
Trader Rating: (14)
5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute
Feedback Score: 14 reviews
Send a message via AIM to 5t341tH
nah its metal. has studs and shit like that.
gotta get it
__________________

lexus baby
5t341tH is offline   Reply With Quote
Old 03-14-2009, 12:28 AM   #30
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
you're saying i couldn't 3m tape the extensions to the fender?
lflkajfj12123 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™