I searched and found nothing so please help!!!. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

k's_silvia2.0 · 08-22-2008, 08:49 AM

I need to see some pics or examples of how a 4 point harness

bolts up with no roll bar. I installed my Sabelt harness last night and

my left shoulder strap(sitting in seat) is really lose

Do I need to cross em?

Please post usefull pics or links and don't give me a hard time cause

Im already pissed that I couldn't figure it out. I bolted it up the right

strap to where the stock rear lap belt goes and the left to where the

the stock rear seatbelt goes but is has too much slack. Please help

Massimo Power · 08-22-2008, 01:32 PM

there should be a sleeve near where it bolts down to where you can adjust the belt to be shorter or longer.. you should be able to adjust the length individualy on the belts.. thats how my Schroth harness are but i have a roll bar.

Andrew Bohan · 08-22-2008, 01:37 PM

you shouldn't use a harness with no roll bar anyway

that's why it's hard to find a good way to do it.

HS13KLS · 08-22-2008, 01:41 PM

tahts waht i did when i had no cage.. you HAVE to cross them. and you will have a lot of slack in the back. then you just adjust. use eye bolts in where the rear seat belts are. and then you are set

Massimo Power · 08-22-2008, 01:43 PM

Quote:

Originally Posted by Andrew Bohan

you shouldn't use a harness with no roll bar anyway

that's why it's hard to find a good way to do it.

100% agree with that...

azndoc · 08-22-2008, 01:45 PM

The harness bar is suppose to be no greater than 20 degrees I believe.

I don't know

***S14DB*** · 08-22-2008, 05:28 PM

Quote:

Originally Posted by Andrew Bohan

you shouldn't use a harness with no roll bar anyway

that's why it's hard to find a good way to do it.

Not a prudy picture when you roll/roof collapses.

k's_silvia2.0 · 08-22-2008, 06:17 PM

Quote:

Originally Posted by HS13KLS

tahts waht i did when i had no cage.. you HAVE to cross them. and you will have a lot of slack in the back. then you just adjust. use eye bolts in where the rear seat belts are. and then you are set

Yea thats what I was thinking.

Imma try and see what happens.

Oh and im not doing any driving to where I have to worry about a rollover

but should I

Andrew Bohan · 08-22-2008, 06:31 PM

if you're not driving hard enough to have to worry about rolling over, you probably don't need a harness either

k's_silvia2.0 · 08-22-2008, 07:09 PM

^True dat.

Oh well.

08-22-2008, 08:49 AM	#1
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 35 Posts: 5,111 Trader Rating: (17) Feedback Score: 17 reviews	I searched and found nothing so please help!!!. I need to see some pics or examples of how a 4 point harness bolts up with no roll bar. I installed my Sabelt harness last night and my left shoulder strap(sitting in seat) is really loseDo I need to cross em? Please post usefull pics or links and don't give me a hard time cause Im already pissed that I couldn't figure it out. I bolted it up the right strap to where the stock rear lap belt goes and the left to where the the stock rear seatbelt goes but is has too much slack. Please help __________________

08-22-2008, 01:32 PM	#2
Massimo Power Zilvia Junkie Join Date: Jul 2008 Location: Corona, CA Posts: 322 Trader Rating: (8) Feedback Score: 8 reviews	there should be a sleeve near where it bolts down to where you can adjust the belt to be shorter or longer.. you should be able to adjust the length individualy on the belts.. thats how my Schroth harness are but i have a roll bar. __________________ www.massimopower.com PH: 1(951)402-5386 EM:[email protected] Special Thanks To: www.aeperformance.com www.domospeed.com/blog For Their Continued Support

08-22-2008, 07:09 PM	#10
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 35 Posts: 5,111 Trader Rating: (17) Feedback Score: 17 reviews	^True dat. Oh well. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-22-2008, 01:37 PM	#3
Andrew Bohan Post Whore! Join Date: Apr 2003 Location: Location: Location Posts: 8,330 Trader Rating: (2) Feedback Score: 2 reviews	you shouldn't use a harness with no roll bar anyway that's why it's hard to find a good way to do it.

08-22-2008, 01:41 PM	#4
HS13KLS Zilvia FREAK! Join Date: Aug 2006 Location: Illinois/California Age: 32 Posts: 1,114 Trader Rating: (13) Feedback Score: 13 reviews	tahts waht i did when i had no cage.. you HAVE to cross them. and you will have a lot of slack in the back. then you just adjust. use eye bolts in where the rear seat belts are. and then you are set

08-22-2008, 01:45 PM	#6
azndoc Post Whore! Join Date: Feb 2006 Location: Los Angeles Age: 39 Posts: 9,487 Trader Rating: (47) Rides Gallery: azndoc Feedback Score: 47 reviews	The harness bar is suppose to be no greater than 20 degrees I believe. I don't know

08-22-2008, 06:31 PM	#9
Andrew Bohan Post Whore! Join Date: Apr 2003 Location: Location: Location Posts: 8,330 Trader Rating: (2) Feedback Score: 2 reviews	if you're not driving hard enough to have to worry about rolling over, you probably don't need a harness either