Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-17-2014, 05:10 PM   #1
Frankiejay420
 
Join Date: Mar 2014
Location: Corona CA
Age: 25
Posts: 10
Trader Rating: (0)
Frankiejay420 is an unknown quantity at this point
Feedback Score: 0 reviews
s13 Ka24e to ka24de 12v to coil, no spark /:<

Ka24e to ka24de swap, has fuel but not getting spark.. 12 volts to the coil but nothing coming out.. what could it possible be? the ECU I got from the guy two weeks later hoping he didn't drop it or anything.. I did re pin the dash connector, water temp, tech, speedometer, a/c, ignition start signal and grounded the black wire to two ground wires from the actual plug.. Even bought another coil thinking the first one I just bought was a bad coil, should I try swapping ECU's? How can I use my DMM and test the dizzy? or CAS? Im pretty sure I read the coil right, my first time using a DMM lol or maybe its the Module? I know ima need to swap the tach if I want it to work, or do I need a dohc tach to complete the circuit or something because I see that same wire runs to the relay by my coil doesn't the coil have a pulse? maybe a bad relay? plugs look good.. seems like everything else works, like my cluster, brake light but my E-brake light does stay on when the E-brake is down I believe, well this is my first swap so bare with me please.. been searching and searching and seem to not find much.. :wtf2: :gotme

Last edited by Frankiejay420; 03-17-2014 at 10:02 PM..
Frankiejay420 is offline   Reply With Quote
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™