350Z SR20DET Drift Car Build :) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SR240Z · 05-13-2009, 01:34 PM

Yes this is for real! We are in the midst of building the roll cage for our 350z to Formula D rule standards.

The car is going to primarily be a competition drift car which I (Alex) will be driving. I will be documenting progress on www.AlexVillabrille.com as well as through this thread. I was able to get some semi-sponsorships to help with the build from Daryl Alison at JustDriven.com, M1 Autosports, and Dynamic Autosports.

I do not have my license yet but have been practicing and once the car is ready will go out to get my license.

Attached are some teaser shots for your viewing pleasure:

May 7th:

May 8th:

May 9th:

Roll Cage COMPLETED!!! May 12th:

C-unit · 05-13-2009, 03:18 PM

Very nice!! but i am more interested in the R34 at the back!!

Twenty4 · 05-13-2009, 05:25 PM

and that red s15 hiding back there!

SR240Z · 05-13-2009, 05:43 PM

The R34 just got the bottom end all forged built with complete tomei head and HKS 2530s and the Red S15 we are in the process of building the roll cage since it will also be a drift car...

SR240Z · 05-17-2009, 11:50 AM

Well I went to Pro-Motion Distrbuting on Friday and picked up their final stock of the Sparco Pro2000 Seats as well as some aluminum side mounts.

I also got my Momo steering wheel hub but still trying to decide on which steering wheel to do with...

Keep your eye out for the ETB Instruments DigiDash coming soon

Check the seats out:

*Antihero983* · 05-17-2009, 03:21 PM

Quote:

Originally Posted by Twenty4

and that red s15 hiding back there!

Quote:

Originally Posted by C-unit

Very nice!! but i am more interested in the R34 at the back!!

lol fanboys much??

anyways....

what SR will you be using, and what are your power goals?

SR240Z · 05-17-2009, 07:26 PM

We are going to be pulling the built SR out of our S30 but mate it to a Z32 trans for a stronger and more reliable setup.

The motor runs great and super strong and was dynoed at 508whp at 26psi and race gas... should be around 450-470 on pump.

SR240Z · 05-20-2009, 07:02 PM

Been trying to clean up the rest of the interior so we can prep it for paint and begin to move onto the rest of the good stuff!!!

The rubber seem sealer is a pain in the ass to wire wheel all off, but it is finally done! Oh and I used dry ice of course to remove all the tar.

www.alexvillabrille.com

arkive43 · 05-22-2009, 07:40 PM

cool, will definatly be checking this thread, since there are no engine pics

SR240Z · 06-01-2009, 07:26 PM

Well this would have been a productive weekend usually, if we had actually liked the final turnout of the interior paint. We spent the entire day on Saturday prepping the car to be ready to paint and we got to the interior on Sunday morning and were going to start painting the exterior of the car but it was drizzling and not a good day to continue. The end result of the interior we didn’t like so much, but you guys be the judge. Going to re-paint it this weekend hopefully.

TODAY:
We brought the infamous SR20 powered 240Z to rip its heart out! It was sad to take the car back home on a trailer but it had to be done at some point. In the future the 240Z is likely to get a 2JZ for some street fun. (Don’t mind the tow straps as were pulling the engine, its super light and didn’t have the transmission attached to it anymore)

Be sure to keep up on www.AlexVillabrille.com

s13silvia123 · 06-02-2009, 08:07 PM

wow fukkkkken amazing

surge s14 · 06-02-2009, 08:11 PM

yes hell freaken YES!

jdizzy204 · 06-03-2009, 08:08 AM

put a KA-T in the s30!!!

SR240Z · 06-03-2009, 08:12 AM

hahah no KA-T for the S30. We already played with the KA motor in NA form for the 510 which is still up for sale and this time were going single turbo 2JZ for some easy street fun....

But again the 350Z project is priority now and the S30 is on the back burner for a while

blueshark123 · 06-03-2009, 08:50 PM

more pics of 240z please

SR240Z · 06-04-2009, 12:18 AM

Pics of the 240Z are back up and hosted on the SR240Z.com site: SR240Z | SR20 Powered 240Z.

C-unit · 06-04-2009, 04:36 AM

Quote:

Originally Posted by RedEvilRPS13

lol fanboys much??

I probably own more skyline than you've own any of your cars combined.

anyways..prop for all the work!!

SR240Z · 06-10-2009, 06:31 PM

A few updates over these past few days.

The motor pulled from the 240z was dropped into the 350z

Fits very nicely and just need to modify the top-mount manifold so that the turbo clears the strut tower and is closer to the motor and further away from the brake parts.

I went ahead and pulled the brake pedal (was automatic before) to cut it down to size and also install the clutch pedal and master cylinder at the same time. Brake booster and master were also set in place and re-installed

We also got started on the re-wiring of the standalone and complete car. The factory wiring harnesses for the car weigh so much its ridiculous. This new EZ-Wire setup definitely comes in handy but is very time consuming.

www.AlexVillabrille.com

SR240Z · 06-12-2009, 11:42 AM

We are trying to have continuous updates and progress on the car while still working on customer cars during the day. These past two days I have been doing routine service and prepping cars for swaps while my dad started to work on the dash center panel.

He found some carbon sheet lying around the shop and got to fitting it into where the old navigation and Bose stereo used to be. The gauges fitted into the pod are temporary for fitment purposes only.

Check it out:

www.AlexVillabrille.com

If you go to the blog page you can click on all the pictures to view them in full size.

Z33dori · 06-12-2009, 12:48 PM

wow that S30 is mad clean

looking forward to more of this build

SR240Z · 06-20-2009, 06:58 PM

Chet at Galek Motorsports came through with the ETB Instruments DigiDash 2 Lite. It finally arrived today after such a long time in deciding what we were going to do with the central gauge setup.

We will have it installed and wired as soon as the rest of the sensors come in the mail and get some new lit up pictures! Dont forget that if you go to the blog page you can view the pictures in full size when you click on them.

www.AlexVillabrille.com

LoneStarSilvia · 06-20-2009, 07:08 PM

Always been a fan of your guys swapped S30's, good luck with the build, its gonna be pretty sweet

SR240Z · 10-21-2009, 07:04 PM

I know I haven’t lived up to my word in supplying updates for this build but we have been hard at work trust me! UPDATED!!!!!!!!!!!

The entire blog post can be viewed at www.alexvillabrille.com

Here is a preview:
“…KA24 510 tuned but ended up blowing the motor due to tuner error :/ We brought the car back, pulled the KA24 and swapped in an SR20det instead…”

“…new brakes for the 350z track car (Wilwood 6-piston front and 4-piston rear), new front windshield installed, as well as painting the roof…”

Torque Master Joe · 11-01-2009, 10:56 PM

ooh. nice. I like the stitching. sweet.

superdooper · 11-02-2009, 03:52 PM

fucking dope

Omegared99 · 11-14-2009, 11:37 AM

wow im throughly impressed looks like a freakin awesome project

GSXRJJordan · 11-14-2009, 01:39 PM

Nobody noticed the main hoop in the cage pics? WAY over 180* bends.

You'll never get that tech'd, I'm afraid.

Quote:

Originally Posted by Formula D Rulebook

Main hoop: 4 bends maximum, totaling 180 degrees ± 10 degrees.

The rest of the build looks promising... I'm assuming you got the 350z for cheap without the VQ in there...

DataXUnknown · 11-16-2009, 06:50 PM

Quote:

Originally Posted by GSXRJJordan

Nobody noticed the main hoop in the cage pics? WAY over 180* bends.

You'll never get that tech'd, I'm afraid.

The rest of the build looks promising... I'm assuming you got the 350z for cheap without the VQ in there...

I'm pretty sure he will be able to pass tech easy with the cage. Last year they weren't supposed to let people with bolt in cages go, but I looked at a lot of the cars and half of them were bolt in cages (mainly the ones from out of country, maybe that has something to do with it?)

GSXRJJordan · 11-16-2009, 08:33 PM

Quote:

Originally Posted by DataXUnknown

I'm pretty sure he will be able to pass tech easy with the cage. Last year they weren't supposed to let people with bolt in cages go, but I looked at a lot of the cars and half of them were bolt in cages (mainly the ones from out of country, maybe that has something to do with it?)

What does that have to do with the main hoop design? Nothing.

The rulebook specifies that bolt-in cages are legal, but even if you run a bolt-in cage, they like them to be welded in. Here's where you can sometimes get hung up:

Quote:

Originally Posted by Formula D Rule Book

2. Removable roll cages and braces shall be very carefully designed and constructed to be at least as strong as a permanent installation.

It's not the construction or the materials (although I can't verify that it's the right material - I'm guessing it's 2500lb+ race weight and needs to be 1.750x.095" DOM), it's the design that's suspect - and the main hoop is not a "borderline"/"fringe" section of the rule book, it's a staple ~ my advice is to have it teched before the build gets any further.

SR240Z · 11-17-2009, 10:51 AM

Our cage fabricator is going to re-make the main hoop if he has to.... We already told him the issue and he surpassed that when we gave him the rule book.

This 350z was the best deal I have ever gotten and it was a complete running car, but since it was pre-production it was not "allowed" to be registered...FREE!!

05-13-2009, 01:34 PM	#1
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	350Z SR20DET Drift Car Build :) Yes this is for real! We are in the midst of building the roll cage for our 350z to Formula D rule standards. The car is going to primarily be a competition drift car which I (Alex) will be driving. I will be documenting progress on www.AlexVillabrille.com as well as through this thread. I was able to get some semi-sponsorships to help with the build from Daryl Alison at JustDriven.com, M1 Autosports, and Dynamic Autosports. I do not have my license yet but have been practicing and once the car is ready will go out to get my license. Attached are some teaser shots for your viewing pleasure: May 7th: May 8th: May 9th: Roll Cage COMPLETED!!! May 12th: __________________ 2004 IS300 Sportcross 1JZ

05-13-2009, 05:43 PM	#4
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	The R34 just got the bottom end all forged built with complete tomei head and HKS 2530s and the Red S15 we are in the process of building the roll cage since it will also be a drift car... __________________ 2004 IS300 Sportcross 1JZ

05-17-2009, 11:50 AM	#5
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Well I went to Pro-Motion Distrbuting on Friday and picked up their final stock of the Sparco Pro2000 Seats as well as some aluminum side mounts. I also got my Momo steering wheel hub but still trying to decide on which steering wheel to do with... Keep your eye out for the ETB Instruments DigiDash coming soon Check the seats out: __________________ 2004 IS300 Sportcross 1JZ

05-17-2009, 07:26 PM	#7
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	We are going to be pulling the built SR out of our S30 but mate it to a Z32 trans for a stronger and more reliable setup. The motor runs great and super strong and was dynoed at 508whp at 26psi and race gas... should be around 450-470 on pump. __________________ 2004 IS300 Sportcross 1JZ

05-20-2009, 07:02 PM	#8
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Been trying to clean up the rest of the interior so we can prep it for paint and begin to move onto the rest of the good stuff!!! The rubber seem sealer is a pain in the ass to wire wheel all off, but it is finally done! Oh and I used dry ice of course to remove all the tar. www.alexvillabrille.com __________________ 2004 IS300 Sportcross 1JZ

05-13-2009, 03:18 PM	#2
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 36 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Very nice!! but i am more interested in the R34 at the back!!

05-13-2009, 05:25 PM	#3
Twenty4 BANNED Join Date: Nov 2008 Location: Newbury Park, CA Age: 30 Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	and that red s15 hiding back there!

05-22-2009, 07:40 PM	#9
arkive43 Zilvia Addict Join Date: Sep 2006 Location: houston Age: 38 Posts: 795 Trader Rating: (0) Feedback Score: 0 reviews	cool, will definatly be checking this thread, since there are no engine pics

06-01-2009, 07:26 PM	#10
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Well this would have been a productive weekend usually, if we had actually liked the final turnout of the interior paint. We spent the entire day on Saturday prepping the car to be ready to paint and we got to the interior on Sunday morning and were going to start painting the exterior of the car but it was drizzling and not a good day to continue. The end result of the interior we didn’t like so much, but you guys be the judge. Going to re-paint it this weekend hopefully. TODAY: We brought the infamous SR20 powered 240Z to rip its heart out! It was sad to take the car back home on a trailer but it had to be done at some point. In the future the 240Z is likely to get a 2JZ for some street fun. (Don’t mind the tow straps as were pulling the engine, its super light and didn’t have the transmission attached to it anymore) Be sure to keep up on www.AlexVillabrille.com __________________ 2004 IS300 Sportcross 1JZ

06-02-2009, 08:07 PM	#11
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 39 Posts: 3,256 Trader Rating: (16) Feedback Score: 16 reviews	wow fukkkkken amazing __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

06-02-2009, 08:11 PM	#12
surge s14 Zilvia FREAK! Join Date: Dec 2005 Location: Laredo Texas Posts: 1,125 Trader Rating: (12) Feedback Score: 12 reviews	yes hell freaken YES! __________________

06-03-2009, 08:08 AM	#13
jdizzy204 Zilvia FREAK! Join Date: Oct 2004 Location: Tokyo, Japan Age: 33 Posts: 1,041 Trader Rating: (11) Feedback Score: 11 reviews	put a KA-T in the s30!!! __________________ Tokyo, JP

06-03-2009, 08:12 AM	#14
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	hahah no KA-T for the S30. We already played with the KA motor in NA form for the 510 which is still up for sale and this time were going single turbo 2JZ for some easy street fun.... But again the 350Z project is priority now and the S30 is on the back burner for a while __________________ 2004 IS300 Sportcross 1JZ

06-03-2009, 08:50 PM	#15
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	more pics of 240z please

06-04-2009, 12:18 AM	#16
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Pics of the 240Z are back up and hosted on the SR240Z.com site: SR240Z \| SR20 Powered 240Z. __________________ 2004 IS300 Sportcross 1JZ

06-10-2009, 06:31 PM	#18
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	A few updates over these past few days. The motor pulled from the 240z was dropped into the 350z Fits very nicely and just need to modify the top-mount manifold so that the turbo clears the strut tower and is closer to the motor and further away from the brake parts. I went ahead and pulled the brake pedal (was automatic before) to cut it down to size and also install the clutch pedal and master cylinder at the same time. Brake booster and master were also set in place and re-installed We also got started on the re-wiring of the standalone and complete car. The factory wiring harnesses for the car weigh so much its ridiculous. This new EZ-Wire setup definitely comes in handy but is very time consuming. www.AlexVillabrille.com __________________ 2004 IS300 Sportcross 1JZ

06-12-2009, 11:42 AM	#19
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	We are trying to have continuous updates and progress on the car while still working on customer cars during the day. These past two days I have been doing routine service and prepping cars for swaps while my dad started to work on the dash center panel. He found some carbon sheet lying around the shop and got to fitting it into where the old navigation and Bose stereo used to be. The gauges fitted into the pod are temporary for fitment purposes only. Check it out: www.AlexVillabrille.com If you go to the blog page you can click on all the pictures to view them in full size. __________________ 2004 IS300 Sportcross 1JZ

06-12-2009, 12:48 PM	#20
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 32 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	wow that S30 is mad clean looking forward to more of this build __________________

06-20-2009, 06:58 PM	#21
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Chet at Galek Motorsports came through with the ETB Instruments DigiDash 2 Lite. It finally arrived today after such a long time in deciding what we were going to do with the central gauge setup. We will have it installed and wired as soon as the rest of the sensors come in the mail and get some new lit up pictures! Dont forget that if you go to the blog page you can view the pictures in full size when you click on them. www.AlexVillabrille.com __________________ 2004 IS300 Sportcross 1JZ

06-20-2009, 07:08 PM	#22
LoneStarSilvia Zilvia FREAK! Join Date: Jun 2005 Location: Okinawa--->Arizona Age: 33 Posts: 1,509 Trader Rating: (5) Feedback Score: 5 reviews	Always been a fan of your guys swapped S30's, good luck with the build, its gonna be pretty sweet __________________

10-21-2009, 07:04 PM	#23
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	I know I haven’t lived up to my word in supplying updates for this build but we have been hard at work trust me! UPDATED!!!!!!!!!!! The entire blog post can be viewed at www.alexvillabrille.com Here is a preview: “…KA24 510 tuned but ended up blowing the motor due to tuner error :/ We brought the car back, pulled the KA24 and swapped in an SR20det instead…” “…new brakes for the 350z track car (Wilwood 6-piston front and 4-piston rear), new front windshield installed, as well as painting the roof…” __________________ 2004 IS300 Sportcross 1JZ

11-01-2009, 10:56 PM	#24
Torque Master Joe Join Date: Oct 2009 Location: MD Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	ooh. nice. I like the stitching. sweet.

11-02-2009, 03:52 PM	#25
superdooper Leaky Injector Join Date: Oct 2009 Location: nashville Age: 32 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	fucking dope

11-14-2009, 11:37 AM	#26
Omegared99 Join Date: Oct 2009 Location: georgia Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	wow im throughly impressed looks like a freakin awesome project

11-17-2009, 10:51 AM	#30
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Our cage fabricator is going to re-make the main hoop if he has to.... We already told him the issue and he surpassed that when we gave him the rule book. This 350z was the best deal I have ever gotten and it was a complete running car, but since it was pre-production it was not "allowed" to be registered...FREE!! __________________ 2004 IS300 Sportcross 1JZ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode