PBM comp question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Rps13Ed · 06-22-2012, 09:16 PM

Got my PBM competitions today I mounted the rear fine when I went to throw the fronts on I mounted the tops fine and when I got to the lower hub bolts the pbm hole to fit the bolt through is too skinny to fit the OEM size bolts... Any suggestions? The car is s13 hatch

G5SR20240 · 06-22-2012, 09:26 PM

Is the mount on upside down?

Fries · 06-22-2012, 09:29 PM

Do you maybe have s14 lower control arms? Because you might also have s14 hubs, which would mean you have a larger bolt for that. I'd just get a 14mm IIRC drill bit and fix'r up. Or contact PBM and see about getting s14 lower mounts.

Definitely double check though.

EhrikETFG · 06-22-2012, 09:41 PM

grab a drill dude

Rps13Ed · 06-22-2012, 09:43 PM

Yeah 5 lug S14 swap! Just clicked! I need it ASAP to get my car on the ground and running! Need to contact PBM!

Rps13Ed · 06-22-2012, 09:48 PM

Anybody know if PBM will send me out just the s14 mount?

Mitsubayati · 06-22-2012, 11:01 PM

Just go get s13 bolts. I have the same setup and got a spacer so I could use the s13 bolt on s14 knuckles with no play. Otherwise, just drill out the hole.

STEEZxIT · 06-22-2012, 11:03 PM

i don't know for sure. but you should call the konig distribution center. they'll know for sure. speak to greg. tell him steve sent you there.

Rps13Ed · 06-22-2012, 11:09 PM

preciate it you know if they open saturday?

Rps13Ed · 06-22-2012, 11:10 PM

probably just get the spacer for the knuckle! and wait for PBM to send me the new one!

Rps13Ed · 06-23-2012, 11:51 AM

Should it affect the rear?

Rps13Ed · 06-23-2012, 12:20 PM

ImageUploadedByTapatalk1340475629.391719.jpg

Got to work!

06-22-2012, 09:16 PM	#1
Rps13Ed Zilvia Member Join Date: May 2012 Location: Somewhere Age: 28 Posts: 220 Trader Rating: (0) Feedback Score: 0 reviews	PBM comp question Got my PBM competitions today I mounted the rear fine when I went to throw the fronts on I mounted the tops fine and when I got to the lower hub bolts the pbm hole to fit the bolt through is too skinny to fit the OEM size bolts... Any suggestions? The car is s13 hatch

06-22-2012, 09:29 PM	#3
Fries Zilvia FREAK! Join Date: May 2007 Location: Texas/or/Afghanistan Age: 33 Posts: 1,511 Trader Rating: (3) Feedback Score: 3 reviews	Do you maybe have s14 lower control arms? Because you might also have s14 hubs, which would mean you have a larger bolt for that. I'd just get a 14mm IIRC drill bit and fix'r up. Or contact PBM and see about getting s14 lower mounts. Definitely double check though. __________________

06-22-2012, 11:01 PM	#7
Mitsubayati Zilvia FREAK! Join Date: Aug 2007 Location: The Dro Posts: 1,424 Trader Rating: (18) Feedback Score: 18 reviews	Just go get s13 bolts. I have the same setup and got a spacer so I could use the s13 bolt on s14 knuckles with no play. Otherwise, just drill out the hole. __________________

06-22-2012, 11:03 PM	#8
STEEZxIT Zilvia FREAK! Join Date: Oct 2009 Location: socal, man! Posts: 1,260 Trader Rating: (11) Feedback Score: 11 reviews	i don't know for sure. but you should call the konig distribution center. they'll know for sure. speak to greg. tell him steve sent you there. __________________ @dangerdamian

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-22-2012, 09:26 PM	#2
G5SR20240 Zilvia Member Join Date: Jan 2011 Location: San Diego Age: 36 Posts: 230 Trader Rating: (9) Feedback Score: 9 reviews	Is the mount on upside down?

06-22-2012, 09:41 PM	#4
EhrikETFG Zilvia Addict Join Date: Aug 2009 Location: Lancaster, PA Posts: 689 Trader Rating: (0) Feedback Score: 0 reviews	grab a drill dude

06-22-2012, 09:43 PM	#5
Rps13Ed Zilvia Member Join Date: May 2012 Location: Somewhere Age: 28 Posts: 220 Trader Rating: (0) Feedback Score: 0 reviews	Yeah 5 lug S14 swap! Just clicked! I need it ASAP to get my car on the ground and running! Need to contact PBM!

06-22-2012, 09:48 PM	#6
Rps13Ed Zilvia Member Join Date: May 2012 Location: Somewhere Age: 28 Posts: 220 Trader Rating: (0) Feedback Score: 0 reviews	Anybody know if PBM will send me out just the s14 mount?

06-22-2012, 11:09 PM	#9
Rps13Ed Zilvia Member Join Date: May 2012 Location: Somewhere Age: 28 Posts: 220 Trader Rating: (0) Feedback Score: 0 reviews	preciate it you know if they open saturday?

06-22-2012, 11:10 PM	#10
Rps13Ed Zilvia Member Join Date: May 2012 Location: Somewhere Age: 28 Posts: 220 Trader Rating: (0) Feedback Score: 0 reviews	probably just get the spacer for the knuckle! and wait for PBM to send me the new one!

06-23-2012, 11:51 AM	#11
Rps13Ed Zilvia Member Join Date: May 2012 Location: Somewhere Age: 28 Posts: 220 Trader Rating: (0) Feedback Score: 0 reviews	Should it affect the rear?