S13 dcc help! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240sxvaj · 06-30-2010, 06:21 PM

hey i was wondering if you guys can help me hook up the rest of my sensors on my s13 dcc. i still need the ambient sensor came off a infiniti, sunload sensor came off the early year q45 and 96 altima, and Cabin air temp sensor came off a infiniti .

i have the dcc installed but its only on full blast. i have the Blend door actuator,Blower motor speed controller, and aspirator tube installed already.

the thing im confused on is the 2 green extra wires w/ red dot i have that has no harness plug on it. both is on its own.

i have been through over 5 sites to install this thing but only one have info on stalling the ambient sensor and such but im still confused a little.

punxva · 06-30-2010, 07:22 PM

you need to install the middle sensor in the air box mine did this too until i installed it, i forget what its called

240sxvaj · 06-30-2010, 07:29 PM

Quote:

Originally Posted by punxva

you need to install the middle sensor in the air box mine did this too until i installed it, i forget what its called

i think thats part of the aspirator tube. i have that too. and im sure its installed already.

can you send me some pix of your set up where all the wiring was wired to?

punxva · 06-30-2010, 09:07 PM

actually my bad its this

here's a link to the writeup i followed

http://zilvia.net/f/tech-talk/154426...e-control.html

240sxvaj · 06-30-2010, 09:30 PM

Quote:

Originally Posted by punxva

actually my bad its this

here's a link to the writeup i followed

http://zilvia.net/f/tech-talk/154426...e-control.html

Thanks but that was the first write up i follow and it doesnt show the extra harness i have. maybe mine is just there for some odd reason?

i will post a pix of my harness tomorrow.

punxva · 07-01-2010, 12:04 AM

yeah do that and i will try helping you, i got mine straight out of a car in japan from my friend he cut behind the stock plug so i had both sides of the pigtails since he didn't know what i needed

240sxvaj · 07-01-2010, 05:01 PM

here is what i have and all installed already. i also got the rest of the sensors needed.

here is the pix im talking about:

The black circle in the pix is the 2 greens wires that i was telling you about and it looks like it was cut and has no harness plug when i bought it. im not sure where those wire are connected to.

The blue circle in the pix is where all the extra wires i have left. i follow the write up and switch the wire Blue/Red stripe to the harness like told now im left with the other wires.

lmk what wires are connected to the sunload sensor, ambient sensor, and cabin air temp sensor

punxva · 07-02-2010, 05:47 PM

mine had all of the plugs on it for all of the sensors

240sxvaj · 07-02-2010, 06:01 PM

Quote:

Originally Posted by punxva

mine had all of the plugs on it for all of the sensors

whenever you have time can you send me a pix of how your dcc is wired up to everything?

thanks!

240sxvaj · 07-04-2010, 02:34 PM

bump! anyone know the wires?

deadghost · 07-14-2010, 10:37 AM

Im having the same problem, my AC unit is set to full blast, and not to mention that my night lights will not turn off on my rear tail lights, im trying to figure out if its a relay! Any thoughts?

S13 Matt · 07-14-2010, 11:40 AM

The green wires are either for the sunload sensor ( the one that goes on top of the dash) or the sensor that goes in the engine bay. Its been a while since I have done mine, so I cant recall 100%.

240sxvaj · 07-15-2010, 10:24 AM

Quote:

Originally Posted by S13 Matt

The green wires are either for the sunload sensor ( the one that goes on top of the dash) or the sensor that goes in the engine bay. Its been a while since I have done mine, so I can recall 100%.

hmmmmmmm.......i thought that too but when i connected it i couldnt really tell if it was working or not. also there is 2 wires on sunload sensor and ambient sensor.

S13 Matt · 07-15-2010, 10:31 AM

I can pull mine out this weekend and tell you for sure.

creyes13491 · 07-15-2010, 10:59 AM

here, this might help with your problem.
part 1
YouTube - S13 Digital Climate Control Conversion
part 2
YouTube - S13 Digital Climate Control Conversion - Part 2
part 3
YouTube - S13 Digital Climate Control Conversion - Part 3

420sxwetdreams · 07-17-2010, 08:42 AM

i belive someone just did a 3 part dcc install on you tube let me know I will be doing the same thing next month... GL

240sxvaj · 07-17-2010, 11:30 AM

Quote:

Originally Posted by S13 Matt

I can pull mine out this weekend and tell you for sure.

i would love you forever if you can do this for me. and i mean every wire even though i already have them installed.

thanks!

as for the youtube clips i already seen those and the thing that sucks about it is he doesnt show what wiring goes to what, he only says it. but it was a good vid

noynek · 10-03-2010, 05:34 AM

Bump:

Hi Guys the wire color for the sunload sensor and outside ambient air sensor would be helpful for me to. I have everthing else fiigured out on a slightly cut harness

Thanks much

noynek · 10-11-2010, 01:50 PM

Quote:

Originally Posted by noynek

Bump:

Hi Guys the wire color for the sunload sensor and outside ambient air sensor would be helpful for me to. I have everthing else fiigured out on a slightly cut harness

Thanks much

BUMP

Can anyone help a brother. I cant figure out which wire on the DCC subharness connects to the outside air temperature sensor

Thanks

240sxvaj · 10-13-2010, 06:15 PM

man someone needs to do another write up on the DCC's but with 100% exact pix of EVERYTHING lol

06-30-2010, 06:21 PM	#1
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 31 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	S13 dcc help! hey i was wondering if you guys can help me hook up the rest of my sensors on my s13 dcc. i still need the ambient sensor came off a infiniti, sunload sensor came off the early year q45 and 96 altima, and Cabin air temp sensor came off a infiniti . i have the dcc installed but its only on full blast. i have the Blend door actuator,Blower motor speed controller, and aspirator tube installed already. the thing im confused on is the 2 green extra wires w/ red dot i have that has no harness plug on it. both is on its own. i have been through over 5 sites to install this thing but only one have info on stalling the ambient sensor and such but im still confused a little.

07-14-2010, 11:40 AM	#12
S13 Matt Join Date: May 2010 Location: North Carolina Age: 33 Posts: 12 Trader Rating: (2) Feedback Score: 2 reviews	The green wires are either for the sunload sensor ( the one that goes on top of the dash) or the sensor that goes in the engine bay. Its been a while since I have done mine, so I cant recall 100%. Last edited by S13 Matt; 07-15-2010 at 10:30 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-01-2010, 05:01 PM	#7
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 31 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	here is what i have and all installed already. i also got the rest of the sensors needed. here is the pix im talking about: The black circle in the pix is the 2 greens wires that i was telling you about and it looks like it was cut and has no harness plug when i bought it. im not sure where those wire are connected to. The blue circle in the pix is where all the extra wires i have left. i follow the write up and switch the wire Blue/Red stripe to the harness like told now im left with the other wires. lmk what wires are connected to the sunload sensor, ambient sensor, and cabin air temp sensor

07-04-2010, 02:34 PM	#10
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 31 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	bump! anyone know the wires?

07-14-2010, 10:37 AM	#11
deadghost Zilvia FREAK! Join Date: Aug 2007 Location: az Posts: 1,229 Trader Rating: (21) Feedback Score: 21 reviews	Im having the same problem, my AC unit is set to full blast, and not to mention that my night lights will not turn off on my rear tail lights, im trying to figure out if its a relay! Any thoughts?

07-15-2010, 10:31 AM	#14
S13 Matt Join Date: May 2010 Location: North Carolina Age: 33 Posts: 12 Trader Rating: (2) Feedback Score: 2 reviews	I can pull mine out this weekend and tell you for sure.

07-15-2010, 10:59 AM	#15
creyes13491 Zilvia Junkie Join Date: Mar 2008 Location: north hills Posts: 381 Trader Rating: (30) Feedback Score: 30 reviews	here, this might help with your problem. part 1 YouTube - S13 Digital Climate Control Conversion part 2 YouTube - S13 Digital Climate Control Conversion - Part 2 part 3 YouTube - S13 Digital Climate Control Conversion - Part 3

07-17-2010, 08:42 AM	#16
420sxwetdreams Leaky Injector Join Date: Jun 2010 Location: Central Florida Posts: 51 Trader Rating: (1) Feedback Score: 1 reviews	i belive someone just did a 3 part dcc install on you tube let me know I will be doing the same thing next month... GL

10-03-2010, 05:34 AM	#18
noynek Leaky Injector Join Date: Aug 2009 Location: Caribbean Posts: 71 Trader Rating: (6) Feedback Score: 6 reviews	Bump: Hi Guys the wire color for the sunload sensor and outside ambient air sensor would be helpful for me to. I have everthing else fiigured out on a slightly cut harness Thanks much

10-13-2010, 06:15 PM	#20
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 31 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	man someone needs to do another write up on the DCC's but with 100% exact pix of EVERYTHING lol