Best universal cup holder? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

claytoncallihan · 10-09-2012, 02:47 PM

Was wondering where people are currently getting cup holders for their s13's? I dont have any cupholder in mine and its very frustrating. I want at least one. Just wanted to know if some of em around the net have bad reps or good reps, or where you think the best place to get em is. Thanks guys

1on1 · 10-09-2012, 02:52 PM

remove the change holder from the center console.

*!Zar!* · 10-09-2012, 02:59 PM

Quote:

Originally Posted by 1on1

remove the change holder from the center console.

This .

claytoncallihan · 10-09-2012, 03:04 PM

Quote:

Originally Posted by 1on1

remove the change holder from the center console.

change holder? are you talking about the ash tray? and if so, how big of a drink can it hold? will a soda can fit fine?

Thank you again

iBlaze240 · 10-09-2012, 06:19 PM

Yes you can fit anything from a beer bottle, 12-20oz can, to a 32oz large soda. What I have used that works great for me is the Bell vent cupholder that I see a lot of people use on here. I like the look a lot but the only drawback is that the clips don't hold anything heavy and I need it to hold my DD large 32oz coffee every morning, and my 32oz MD Baja Blasts during the day...haha. But the cupholder couldn't hold these very well so my solution was removing the whole dash to unclip the center vent from the rear, you can't do it from the front due to 8 clips, and removed to fins from the vent. Then I pushed the cupholder clips through and wrapped a strong wire around the ends of each clip and bent the ends up. It now can easily hold 5-7 lbs and holds my drinks great everyday. Hope I helped some, btw they are sold at Advance Auto Parts for like $11 or online for like $6. Here's a pic, you can see where I mounted it in the center vent.

BTW, I noticed your in VB. Do you go to the weekend meets at Genro's on Independence?

fiascoelment · 10-09-2012, 06:31 PM

Scout the JDM arm rest cup holders

Teddy Bruckshot · 10-09-2012, 06:38 PM

http://zilvia.net/f/interior-exterio...p-holders.html

This ^^^^^^

rcdad123 · 10-09-2012, 11:06 PM

i used a 3 inch hole saw to cut a hole on my 89 arm rest. next time i`m gonna cut 2 holes so the passenger can have a cup holder too. i used to do the ash tray thing too. i also had a center vent mount that i used for air freshner, but the hooks that attaches to the vents stopped working due to heat. it gets pretty hot in Lakeside.

240BrittonHatch · 10-10-2012, 04:07 PM

Duct tape in the center console works pretty well if you have used the right amount of the roll. probably still cheaper and handier even if you have to waste half a roll, since you will then always have duct tape with you

claytoncallihan · 10-13-2012, 06:05 PM

Quote:

Originally Posted by iBlaze240

Yes you can fit anything from a beer bottle, 12-20oz can, to a 32oz large soda. What I have used that works great for me is the Bell vent cupholder that I see a lot of people use on here. I like the look a lot but the only drawback is that the clips don't hold anything heavy and I need it to hold my DD large 32oz coffee every morning, and my 32oz MD Baja Blasts during the day...haha. But the cupholder couldn't hold these very well so my solution was removing the whole dash to unclip the center vent from the rear, you can't do it from the front due to 8 clips, and removed to fins from the vent. Then I pushed the cupholder clips through and wrapped a strong wire around the ends of each clip and bent the ends up. It now can easily hold 5-7 lbs and holds my drinks great everyday. Hope I helped some, btw they are sold at Advance Auto Parts for like $11 or online for like $6. Here's a pic, you can see where I mounted it in the center vent.

BTW, I noticed your in VB. Do you go to the weekend meets at Genro's on Independence?

Ive been by freedom sometimes, but havent made it to jenros yet. from what i heard its just people fighting and a lot of rice... doesnt sound like that much fun haha i usually stick to myself and a few friends. not to mention my 240 isnt exactly pretty yet haha, but luckily my T.A. ws6 will be back on the road soon, so maybe ill try out jenros, idk. you in hampton roads?

edit: and teddy, thank you, i love those. i am going to try and order one

iBlaze240 · 10-13-2012, 06:41 PM

Quote:

Originally Posted by claytoncallihan

Ive been by freedom sometimes, but havent made it to jenros yet. from what i heard its just people fighting and a lot of rice... doesnt sound like that much fun haha i usually stick to myself and a few friends. not to mention my 240 isnt exactly pretty yet haha, but luckily my T.A. ws6 will be back on the road soon, so maybe ill try out jenros, idk. you in hampton roads?

edit: and teddy, thank you, i love those. i am going to try and order one

Its not bad at jenros, I'm actually here at this moment. I've never seen a fight and I'm here every weekend.

claytoncallihan · 10-13-2012, 10:16 PM

Quote:

Originally Posted by iBlaze240

Its not bad at jenros, I'm actually here at this moment. I've never seen a fight and I'm here every weekend.

my buddy told me there was a fight last weekend -_- haha ima be mad if he was lying >.< but ill check it out sometime man, whats your name?

Afsana · 09-19-2017, 07:13 AM

Many of you have told about cup holders. I know all of you have good knowledge about the issue and hope anyone can suggest me. I Have bought a new branded car and thinking to set up a good cup holder in my car. I have read many articles from online sources and found most them are marketing oriented description. Little while ago I was reading a cup holder review from an online source. Although this thread is old, but some expert or user of cup holders still can provide me a good suggestion or any other reliable sources of best cup holders.

10-09-2012, 02:47 PM	#1
claytoncallihan Join Date: Sep 2012 Location: Virginia Beach, VA Age: 32 Posts: 48 Trader Rating: (1) Feedback Score: 1 reviews	Best universal cup holder? Was wondering where people are currently getting cup holders for their s13's? I dont have any cupholder in mine and its very frustrating. I want at least one. Just wanted to know if some of em around the net have bad reps or good reps, or where you think the best place to get em is. Thanks guys

10-09-2012, 02:52 PM	#2
1on1 Post Whore! Join Date: Aug 2005 Location: Norcal Posts: 3,314 Trader Rating: (15) Rides Gallery: 1on1 Feedback Score: 15 reviews	remove the change holder from the center console. __________________ instagram

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-09-2012, 06:19 PM	#5
iBlaze240 Leaky Injector Join Date: Feb 2011 Location: Connecticut Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	Yes you can fit anything from a beer bottle, 12-20oz can, to a 32oz large soda. What I have used that works great for me is the Bell vent cupholder that I see a lot of people use on here. I like the look a lot but the only drawback is that the clips don't hold anything heavy and I need it to hold my DD large 32oz coffee every morning, and my 32oz MD Baja Blasts during the day...haha. But the cupholder couldn't hold these very well so my solution was removing the whole dash to unclip the center vent from the rear, you can't do it from the front due to 8 clips, and removed to fins from the vent. Then I pushed the cupholder clips through and wrapped a strong wire around the ends of each clip and bent the ends up. It now can easily hold 5-7 lbs and holds my drinks great everyday. Hope I helped some, btw they are sold at Advance Auto Parts for like $11 or online for like $6. Here's a pic, you can see where I mounted it in the center vent. BTW, I noticed your in VB. Do you go to the weekend meets at Genro's on Independence?

10-09-2012, 06:31 PM	#6
fiascoelment Zilvia Junkie Join Date: Nov 2011 Location: Jersey City Age: 28 Posts: 327 Trader Rating: (2) Feedback Score: 2 reviews	Scout the JDM arm rest cup holders

10-09-2012, 11:06 PM	#8
rcdad123 Zilvia Addict Join Date: Jul 2011 Location: san diego Posts: 639 Trader Rating: (0) Feedback Score: 0 reviews	i used a 3 inch hole saw to cut a hole on my 89 arm rest. next time i`m gonna cut 2 holes so the passenger can have a cup holder too. i used to do the ash tray thing too. i also had a center vent mount that i used for air freshner, but the hooks that attaches to the vents stopped working due to heat. it gets pretty hot in Lakeside.

10-10-2012, 04:07 PM	#9
240BrittonHatch Join Date: Sep 2012 Location: Obion, Tn Age: 27 Posts: 32 Trader Rating: (0) Feedback Score: 0 reviews	Duct tape in the center console works pretty well if you have used the right amount of the roll. probably still cheaper and handier even if you have to waste half a roll, since you will then always have duct tape with you

09-19-2017, 07:13 AM	#13
Afsana Join Date: Sep 2017 Location: dhaka Age: 27 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Many of you have told about cup holders. I know all of you have good knowledge about the issue and hope anyone can suggest me. I Have bought a new branded car and thinking to set up a good cup holder in my car. I have read many articles from online sources and found most them are marketing oriented description. Little while ago I was reading a cup holder review from an online source. Although this thread is old, but some expert or user of cup holders still can provide me a good suggestion or any other reliable sources of best cup holders.