Auto Addictions S13 drift video - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TheGuru · 10-08-2009, 02:56 PM

This is a video of our sponsered drift car. I believe that it has turned out relatively well. I'll post some motor shots of the custom manifold we built for it. It's a built KA with our custom manifold

YouTube - Chico movie

And here is the picture of the manifold we fabbed up.

And for the money shot!

S14_Kouki · 10-08-2009, 07:12 PM

Just to let you know this is one of the ugliest manifolds ever seen^^^^^ take notes from my work.

TheGuru · 10-08-2009, 09:13 PM

:lol: Well, I didn't come on here to be judged as to how the shop I work for does their fabbing, I did come on here to show how the work performs.

Thanks for the constructive criticism though!

g_mac530 · 10-10-2009, 11:36 AM

I like where the manifold puts the turbo on the KA, car sounds good too! Nice job

anton1o · 10-12-2009, 06:26 AM

Sorry not from USA, but how come you need to extend the manifod so further out.. Cant it be sitting next to the block with a short low/high mount manifold?

TheGuru · 10-12-2009, 01:33 PM

We didn't need to extend the manifold, we chose to so that we could have the best access to the turbo, as easy as possible.

And thanks for the compliments!

- Josh @ Auto Addictons

TheGuru · 10-13-2009, 02:26 PM

New pictures!

- Josh @ Auto Addictions

chicoson · 10-15-2009, 10:10 PM

well since im the owner of the car i must say the fab work is top notch. andy at autoaddictions is a great fabricator as well as a good friend,his welds are very nice. there was no major reason to make the manifold the way it is except for the ease of accessing the turbo along with keeping the heat away from the brake master. as most people know a hot brake system is bad. the manifold shows the capabilities of the shops fabrication. the turbo spools at 3800rpm so its not that laggy. the long equal lenght runners flow nice and sound great. soo many people think its a SR. currently the KA-T is over 400whp at 21psi but lately we have been running 18psi on the track. also this beast has stock rods haha. running stronger than ever.

10-08-2009, 02:56 PM	#1
TheGuru Join Date: Oct 2009 Location: Rochester Hills, MI Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	Auto Addictions Fully Built KA-T S13 This is a video of our sponsered drift car. I believe that it has turned out relatively well. I'll post some motor shots of the custom manifold we built for it. It's a built KA with our custom manifold YouTube - Chico movie And here is the picture of the manifold we fabbed up. And for the money shot! Last edited by TheGuru; 10-09-2009 at 04:17 PM..

10-08-2009, 07:12 PM	#2
S14_Kouki Nissanaholic! Join Date: Nov 2005 Location: TPA Posts: 1,947 Trader Rating: (4) Feedback Score: 4 reviews	Just to let you know this is one of the ugliest manifolds ever seen^^^^^ take notes from my work. __________________ http://www.fabthis.com http://www.childhoodproductions.com/dbfab/store.html

10-12-2009, 01:33 PM	#6
TheGuru Join Date: Oct 2009 Location: Rochester Hills, MI Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	We didn't need to extend the manifold, we chose to so that we could have the best access to the turbo, as easy as possible. And thanks for the compliments! - Josh @ Auto Addictons Last edited by TheGuru; 10-15-2009 at 07:52 AM..

10-13-2009, 02:26 PM	#7
TheGuru Join Date: Oct 2009 Location: Rochester Hills, MI Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	New pictures! - Josh @ Auto Addictions Last edited by TheGuru; 10-15-2009 at 07:53 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-08-2009, 09:13 PM	#3
TheGuru Join Date: Oct 2009 Location: Rochester Hills, MI Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	:lol: Well, I didn't come on here to be judged as to how the shop I work for does their fabbing, I did come on here to show how the work performs. Thanks for the constructive criticism though!

10-10-2009, 11:36 AM	#4
g_mac530 Zilvia Junkie Join Date: Aug 2007 Location: Allentown, PA Age: 36 Posts: 576 Trader Rating: (11) Feedback Score: 11 reviews	I like where the manifold puts the turbo on the KA, car sounds good too! Nice job

10-12-2009, 06:26 AM	#5
anton1o Zilvia Junkie Join Date: Jul 2008 Location: Melbourne, Australia Age: 35 Posts: 333 Trader Rating: (0) Feedback Score: 0 reviews	Sorry not from USA, but how come you need to extend the manifod so further out.. Cant it be sitting next to the block with a short low/high mount manifold?

10-15-2009, 10:10 PM	#8
chicoson Join Date: Apr 2006 Location: MI Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	well since im the owner of the car i must say the fab work is top notch. andy at autoaddictions is a great fabricator as well as a good friend,his welds are very nice. there was no major reason to make the manifold the way it is except for the ease of accessing the turbo along with keeping the heat away from the brake master. as most people know a hot brake system is bad. the manifold shows the capabilities of the shops fabrication. the turbo spools at 3800rpm so its not that laggy. the long equal lenght runners flow nice and sound great. soo many people think its a SR. currently the KA-T is over 400whp at 21psi but lately we have been running 18psi on the track. also this beast has stock rods haha. running stronger than ever.