Kouki 180sx Aero thread - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Z33dori · 06-06-2009, 04:49 PM

does any one have the part numbers for the OEM aero

need it for:
Front Bumper
Bumper Lip
Side Skirts
3pc Rear Valance
wing

lflkajfj12123 · 06-06-2009, 05:28 PM

Nismoparts.com - Your #1 Source for OEM Parts and Accessories

add the parts to the cart and you'll get the numbers

you're also going to need the bumper extensions

good luck getting a lip word on the street is that nissan discontinued making them

i just finished getting all those parts

Z33dori · 06-06-2009, 05:43 PM

thanks soap

RussellM · 06-06-2009, 10:57 PM

Check out the link below for several pieces. The Front Lip is discontinued through Nissan so you may have to source a used one or maybe someone has a new one still sitting on the shelf somewhere.

http://zilvia.net/f/advertiser-speci...ck-update.html

biggie180sx · 06-06-2009, 11:27 PM

gettin all that new might be alittle hard especially that lip. i got one on the street and had to pay 450 for it i was searching for like 6 months and thats the only one i found so if you find a used one jump on it

***CrimsonRockett*** · 06-07-2009, 01:47 AM

Thank god I managed to come across an entire Kouki 180sx front end today(literally, everything including the lip).

The lip was the last thing I needed to finish my front end.

So, I bought an entire spare 180 front instead...just for the lip.

Haha.

Brian · 06-07-2009, 02:04 AM

new lip club.

sick.

lflkajfj12123 · 06-07-2009, 04:42 AM

three lip club posters in a row?

woa

edit: guess that IS four

biggie180sx · 06-07-2009, 06:16 AM

woops double post

biggie180sx · 06-07-2009, 06:20 AM

kouki lip crew ftw!!

Brian · 06-07-2009, 12:57 PM

joined.

Z33dori · 06-07-2009, 01:25 PM

Does the OEM bumper with the Lip sit lower than the Version Select bumper?

lflkajfj12123 · 06-07-2009, 02:11 PM

no sir

pretty much the same

lip is just molded in (not sure if they took a mold with the weatherstripping under the lip or not which would make it protude a bit more)

benefits of oem

urethane and + street cred

BRAIN_Z33 · 06-07-2009, 02:16 PM

damn i need to go kouki

lflkajfj12123 · 06-07-2009, 02:26 PM

lip club checkin in before graduation party

plasss

***CrimsonRockett*** · 06-07-2009, 02:44 PM

Ohhh yeahhh.

ZX88 · 06-07-2009, 02:49 PM

i want a lip. oh well ill start the kouki no lip gang.

Z33dori · 06-07-2009, 03:59 PM

eh idk... i really love the kouki look... but i might just say fuck it and go a diff direction...

GREXS14 · 06-07-2009, 04:34 PM

I knew I should have bought one when I had the chance.

lflkajfj12123 · 06-07-2009, 07:11 PM

there also needs to be a ganador club

MrFairlady · 06-07-2009, 08:25 PM

Damn,..no more Lip a?I spent like $550 shipped from Westco a year ago.
I Still have the Rubber Mouling that goes around the Lip and meets w/ the bumper.
FULL Kouki FTW baby. old 180.

Sneek peek.
New Kaaa w/ the ol' HOT road Look.Full Kouki aero throughout.

MrMcgarrett · 06-07-2009, 09:48 PM

Can I join too

I got my complete bumper for less then the cost of a new lip

Wish it wasn't cut though

Quote:

Originally Posted by s0apgun

there also needs to be a ganador club

Looks like Brian and I are already members lol

lflkajfj12123 · 06-07-2009, 10:09 PM

count me in too

mrmcgarret - the cut is fine but whoever cut it must of done it the wrong way?

that's how you cut a kouki bumper, you gotta leave the protruding edge on the plate mounting area

maybe just take a day and mold it a bit?

Brian · 06-07-2009, 11:10 PM

haha, Michael McGarret is in the lip+Ganador club.

kalypso123 · 06-07-2009, 11:30 PM

those guys get tougher by the day

MrMcgarrett · 06-07-2009, 11:38 PM

My license plate covers it pretty good.
I have a Group A vent like MrFairlady has in the last pic he posted.
I might cut out the rest of the license plate area and mold it into the bumper.

Z33dori · 06-07-2009, 11:40 PM

Brain what did u use for the 2 side vents off the plate bracket

tho i don't think u can pull that off w/o the plate bracket.... i might try to mic some things up if i go Kouki...

lflkajfj12123 · 06-08-2009, 12:06 AM

r33 gtr n1 carbon fiber duct vents

Brian · 06-08-2009, 12:07 AM

maybe i'm tired so i dont understand what youre asking.

lflkajfj12123 · 06-08-2009, 12:08 AM

Quote:

Originally Posted by Brian

maybe i'm tired so i dont understand what youre asking.

he said what are the vents from

and i think i'm a babychild and won't cut out the plate mounts i think

ITHINK

06-06-2009, 05:43 PM	#3
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 32 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	thanks soap __________________

06-06-2009, 10:57 PM	#4
RussellM Zilvia FREAK! Join Date: May 2009 Location: Olympia, WA Posts: 1,475 Trader Rating: (57) Feedback Score: 57 reviews	Check out the link below for several pieces. The Front Lip is discontinued through Nissan so you may have to source a used one or maybe someone has a new one still sitting on the shelf somewhere. http://zilvia.net/f/advertiser-speci...ck-update.html __________________ 888-673-4063 NissanParts.cc Facebook www.nissanparts.cc

06-07-2009, 02:04 AM	#7
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	new lip club. sick. __________________ http://bhworld.wordpress.com/

06-07-2009, 04:42 AM	#8
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,480 Trader Rating: (20) Feedback Score: 20 reviews	three lip club posters in a row? woa edit: guess that IS four Last edited by lflkajfj12123; 06-07-2009 at 10:59 AM..

06-07-2009, 12:57 PM	#11
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	joined. __________________ http://bhworld.wordpress.com/

06-06-2009, 04:49 PM	#1
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 32 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	Kouki 180sx Aero thread does any one have the part numbers for the OEM aero need it for: Front Bumper Bumper Lip Side Skirts 3pc Rear Valance wing __________________

06-06-2009, 05:28 PM	#2
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,480 Trader Rating: (20) Feedback Score: 20 reviews	Nismoparts.com - Your #1 Source for OEM Parts and Accessories add the parts to the cart and you'll get the numbers you're also going to need the bumper extensions good luck getting a lip word on the street is that nissan discontinued making them i just finished getting all those parts

06-06-2009, 11:27 PM	#5
biggie180sx Zilvia Junkie Join Date: Mar 2009 Location: SoCal 626 Posts: 482 Trader Rating: (28) Feedback Score: 28 reviews	gettin all that new might be alittle hard especially that lip. i got one on the street and had to pay 450 for it i was searching for like 6 months and thats the only one i found so if you find a used one jump on it

06-07-2009, 06:16 AM	#9
biggie180sx Zilvia Junkie Join Date: Mar 2009 Location: SoCal 626 Posts: 482 Trader Rating: (28) Feedback Score: 28 reviews	woops double post

06-07-2009, 06:20 AM	#10
biggie180sx Zilvia Junkie Join Date: Mar 2009 Location: SoCal 626 Posts: 482 Trader Rating: (28) Feedback Score: 28 reviews	kouki lip crew ftw!!

06-07-2009, 01:25 PM	#12
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 32 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	Does the OEM bumper with the Lip sit lower than the Version Select bumper? __________________

06-07-2009, 02:11 PM	#13
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,480 Trader Rating: (20) Feedback Score: 20 reviews	no sir pretty much the same lip is just molded in (not sure if they took a mold with the weatherstripping under the lip or not which would make it protude a bit more) benefits of oem urethane and + street cred

06-07-2009, 02:16 PM	#14
BRAIN_Z33 Zilvia FREAK! Join Date: Feb 2007 Location: CA 909 ie Posts: 1,249 Trader Rating: (20) Rides Gallery: BRAIN_Z33 Feedback Score: 20 reviews	damn i need to go kouki

06-07-2009, 02:26 PM	#15
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,480 Trader Rating: (20) Feedback Score: 20 reviews	lip club checkin in before graduation party plasss Last edited by lflkajfj12123; 09-07-2009 at 10:39 PM..

06-07-2009, 02:49 PM	#17
ZX88 Post Whore! Join Date: Oct 2005 Location: ATX Age: 32 Posts: 2,946 Trader Rating: (8) Feedback Score: 8 reviews	i want a lip. oh well ill start the kouki no lip gang. __________________ SNOW PANTS OR NO PANTS.

06-07-2009, 03:59 PM	#18
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 32 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	eh idk... i really love the kouki look... but i might just say fuck it and go a diff direction... __________________

06-07-2009, 04:34 PM	#19
GREXS14 Leaky Injector Join Date: May 2008 Location: Do you have a room for rent? Posts: 66 Trader Rating: (0) Feedback Score: 0 reviews	I knew I should have bought one when I had the chance.

06-07-2009, 07:11 PM	#20
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,480 Trader Rating: (20) Feedback Score: 20 reviews	there also needs to be a ganador club

06-07-2009, 08:25 PM	#21
MrFairlady Nissanaholic! Join Date: Mar 2007 Location: Fascination Street,N.C Age: 42 Posts: 1,701 Trader Rating: (31) Rides Gallery: MrFairlady Feedback Score: 31 reviews	Damn,..no more Lip a?I spent like $550 shipped from Westco a year ago. I Still have the Rubber Mouling that goes around the Lip and meets w/ the bumper. FULL Kouki FTW baby. old 180. Sneek peek. New Kaaa w/ the ol' HOT road Look.Full Kouki aero throughout. __________________ z-tERty-2

06-07-2009, 10:09 PM	#23
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,480 Trader Rating: (20) Feedback Score: 20 reviews	count me in too mrmcgarret - the cut is fine but whoever cut it must of done it the wrong way? that's how you cut a kouki bumper, you gotta leave the protruding edge on the plate mounting area maybe just take a day and mold it a bit?

06-07-2009, 11:10 PM	#24
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	haha, Michael McGarret is in the lip+Ganador club. __________________ http://bhworld.wordpress.com/

06-07-2009, 11:30 PM	#25
kalypso123 (ノಠ益ಠ)ノ彡 Join Date: Apr 2008 Location: New York, NY Posts: 2,853 Trader Rating: (2) Feedback Score: 2 reviews	those guys get tougher by the day

06-07-2009, 11:38 PM	#26
MrMcgarrett Post Whore! Join Date: Sep 2006 Location: Pomona, CA Age: 39 Posts: 5,591 Trader Rating: (313) Feedback Score: 313 reviews	My license plate covers it pretty good. I have a Group A vent like MrFairlady has in the last pic he posted. I might cut out the rest of the license plate area and mold it into the bumper.

06-07-2009, 11:40 PM	#27
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 32 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	Brain what did u use for the 2 side vents off the plate bracket tho i don't think u can pull that off w/o the plate bracket.... i might try to mic some things up if i go Kouki... __________________

06-08-2009, 12:06 AM	#28
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,480 Trader Rating: (20) Feedback Score: 20 reviews	r33 gtr n1 carbon fiber duct vents

06-08-2009, 12:07 AM	#29
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	maybe i'm tired so i dont understand what youre asking. __________________ http://bhworld.wordpress.com/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode