jkettell

WHOAAAAAAA!!!!!!
a couple random facts people need to know before reading
1. the valentines day heart is actually a women's butt when bending over.
2. the surface area of an average sized brick is 79cm sq
3. the average person falls asleep in 7 mins.
ok thats enough of that for now. lets get to the nidddy gridddy
we'll start off with the car
i picked it up off of a fella on here. its a red 1994 vert. it has 96,xxx miles on it currently i bought it with 94,xxx. brought it down to florida about a week after i bought it. no problems the car is really solid. had the car on a lift also there is no rust underneath it.




Thats the beauty. has been a ton of fun, and i love it.
but its a bit of a dog so the only thing to do is make moreeeeee power.
not just any power good old fashion torquey american power:lol:

this should take care of that
Motor- 2004 pontiac gto
56,xxx miles
my good friend sal popped the valve covers off and it looks ****ing wonderful underneath

shout outs to my pops for taking me to go pick that bad boy up.
now we need to get that power from the motor to the diff.
BOOOOOM got it


T-56 transmission out of one of those firebirds with the cool hoods.
I was told the trans was in the car for a month before the lady totaled the car
shout outs to Matty cakes lomazoff for taking me to pick this sexy thing up.
now to get to the fancy parts that are going to make this swapp work
but first some cute kittens

here we go.

BOXESSSSS
thank you sal for taking me down to maryland to get all these fancy boxes from JE Import Performance :: JE Import Performance
lets crack these nice boxes open.

oh thats nice. now lets tell you whats in this picture.
all parts are from High Performance Auto Parts :: SIKKY Manufacturing
one piece driveshaft
front sway bay
engine mounts
trans mount
long tube headers 1 3/4in
oil filter relocation
oil pan
clutch master cylinder
power steering lines

GOT SOME MOOOORRRREEEE BOXES
Aluminum Radiator, Performance Radiator, Cooling Products - Mishimoto Automotive

there is also a walbro 255lph fuel pump there too kind of a blurr
picked these up from Elite JDM (Elite Imports International)
my local mishimoto dealer
had my headers ceramic coated by
NEEDPOWDERCOATING.COM


BAM
rest of the exhuast

3in flex pipes

3 in V-band clamps

3in in to 3in out magna flow y pipe

brand new bosch o2 sensors
I am running the exhuast single out of the 3in apexi noir catback i currently have.

corvette fuel filter with the necessary adapters to work.
has a built in regulator and a return line built in

brand new delphi MAF
sent my engine harness out to jeff jordan at jordan innovations.
took some time but i can say i am EXTREMELY happy with the product i have gotten back
Welcome to Jordan Innovations - Mil-Spec Wiring/Electronics, Consulting, and Performance Parts Sales



just a few more things
-ecu reflashing
-diff
-axles
i have those things lined up so were shooting for 2 weeks to start


with these two wonderful people were hoping to have this swap done in a weekend "fingers crossed"
questions comments anything is welcome. talk to me i would love to hear what everyone has to say. thank you for taking the time to read this and enjoy

NismoSilvia270R

look out for the vert chassis brace over the trans tunnel where the seam is.
only the verts have this.

even with the sikky kit, you may have contact there.

back when i swapped my vert (gto manifolds and oil pan) on homemade mounts, i had the goat pan 1/2" below the bottom of crossmember and the trans was still hitting the tunnel where the brace was.

if you run into the same problem, you may have to use a hole saw to cut out two small circles from the brace.

if not, then sikky got that thing mounted super low

drscooper

nice bulid and haha on the pics nice stuff man ohh and i love the cute kitties in blankets!!

Nismo11

Dang that is going to be sick when it is done.

h2v7

this whoooooooooole time i thought this was a for sale thread...

instead its some weird broke back mountain ls swap job..

Piggy

Nice, I'm doing the same swap... with the same car. I'll be keeping watch!

__________________

reallygood101

so where the updates at

jkettell

Got a rod knock. Oil lines were backwards sooooo. Gonnna wait it out and have the motor pulled and rebuilt. I will post up more pics and vids soon

JasianBlazin

thats shitty dude, although the picture of you posed as the guy from hangover gave me a good laugh!

jkettell

Hell yea man I try to make everyone laugh. The car is "forsale". But I'm probably going to pull the motor soon and rebuild it. I'm gonna get all the recent pics of it up after work