stall issue and and loose ground wire - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

FRoSt415 · 07-04-2008, 11:44 AM

i thought i rechecked everything and now i have this plug wire that i think is a ground not pluged into anything. does anyone know where it goes. its for my s13 redtop.

also after running my car for a few minutes it stalls out and is hard to keep a good idle. currently i have no BOV and i have mounted a FMIC so should i just plug up this hole until i have a BOV and would that solve my problem?

Heres some engine bay shots as well tell me if you see anything wrong this is my first swap and i wouldnt mind some criticisim.

rb25_s13*CHUKI · 07-04-2008, 02:50 PM

Plug up that b.o.v insert it's causing major boos leak.. Bad air flow=Bad idle.. And that ground wire, there is a little metal tab right next to it on the fire wall. It plugs right on to it.

FRoSt415 · 07-05-2008, 12:05 PM

is it safe to drive with that plugged up and without a BOV?

SoguRacing · 07-05-2008, 12:11 PM

yea, i just wouldn't do a lot of crazy boosting if you want to save you turbo's life

FRoSt415 · 07-05-2008, 02:58 PM

sounds koo, i just need to drive it around a little and go to the muffler shop. no major boosting.

*njd07* · 07-05-2008, 11:23 PM

that ground is for the igntion, there is a spot for it on the fire wall under that lip in your picture.

Joel 180 · 07-07-2008, 12:11 AM

also do something with the t piece on the valve cover. You dont want to drip oil onto the exhaust manifold

FRoSt415 · 07-09-2008, 11:19 AM

cant find tab for the ground and pluged the hole but my idle is all messed up now what can i do? ill post a video in a day or so.

reccakun08 · 07-15-2008, 10:12 AM

yeah def plug the hole up (major boost leak) should stop you from stalling. Idle is messed up how? low/high idle or constantly moving around?

PhopsonNY · 07-23-2008, 09:31 AM

If you cannot find the tab, then it must be missing. All you need to do is make your own ground from good thick copper wire to connecting point on the block to a good ground point on the chassy.

Quote:

Originally Posted by FRoSt415

cant find tab for the ground and pluged the hole but my idle is all messed up now what can i do? ill post a video in a day or so.

FRoSt415 · 07-23-2008, 12:47 PM

ok video is to big for photbucket but i think i have it fixed thanks guys i have a new problem now. can it be my ECU i have this ECU but i dont know what the specs are on it for. i have read in the past that it is for stock sr's but an not sure. when i unplug the Air flow sensor it idles just fine at about 1,500 rpm after it warms up. can anyone help me with identifying this ecu to what specs i need to run right?

Movie of idle that i can fit it cant rev past 3k MVI_0983.flv - Video - Photobucket - Video and Image Hosting

ok its the MAF i think its tuned for z32 will be getting one in a few weeks let me know if anyone has one for sale for a good price.

07-04-2008, 11:44 AM	#1
FRoSt415 Zilvia Junkie Join Date: Dec 2006 Location: san francisco Age: 34 Posts: 305 Trader Rating: (0) Feedback Score: 0 reviews	stall issue and what ECU(SPL Brain) specs? i thought i rechecked everything and now i have this plug wire that i think is a ground not pluged into anything. does anyone know where it goes. its for my s13 redtop. also after running my car for a few minutes it stalls out and is hard to keep a good idle. currently i have no BOV and i have mounted a FMIC so should i just plug up this hole until i have a BOV and would that solve my problem? Heres some engine bay shots as well tell me if you see anything wrong this is my first swap and i wouldnt mind some criticisim. Last edited by FRoSt415; 07-24-2008 at 09:44 AM..

07-04-2008, 02:50 PM	#2
rb25_s13*CHUKI Post Whore! Join Date: Mar 2007 Location: Cali Age: 32 Posts: 2,759 Trader Rating: (16) Feedback Score: 16 reviews	Plug up that b.o.v insert it's causing major boos leak.. Bad air flow=Bad idle.. And that ground wire, there is a little metal tab right next to it on the fire wall. It plugs right on to it. __________________ Obliterate

07-05-2008, 12:11 PM	#4
SoguRacing Post Whore! Join Date: Nov 2007 Location: (714) Age: 35 Posts: 2,967 Trader Rating: (23) Rides Gallery: SoguRacing Feedback Score: 23 reviews	yea, i just wouldn't do a lot of crazy boosting if you want to save you turbo's life __________________ Pre Tune Checkup! Compression,LeakDown,Vacuum Test $80. Cams Install: $180

07-05-2008, 11:23 PM	#6
njd07 Premium Member Join Date: Jan 2004 Location: canada Age: 35 Posts: 644 Trader Rating: (14) Feedback Score: 14 reviews	that ground is for the igntion, there is a spot for it on the fire wall under that lip in your picture. __________________ s13 parts fs:http://www.zilvia.net/f/showthread.php?t=193416 sr parts fs: http://www.zilvia.net/f/showthread.php?t=193399 s14 parts fs:http://www.zilvia.net/f/showthread.php?t=193420 180sx part out http://zilvia.net/f/showthread.php?t=203711

07-23-2008, 12:47 PM	#11
FRoSt415 Zilvia Junkie Join Date: Dec 2006 Location: san francisco Age: 34 Posts: 305 Trader Rating: (0) Feedback Score: 0 reviews	HELP me Identify THIS!!!!! ok video is to big for photbucket but i think i have it fixed thanks guys i have a new problem now. can it be my ECU i have this ECU but i dont know what the specs are on it for. i have read in the past that it is for stock sr's but an not sure. when i unplug the Air flow sensor it idles just fine at about 1,500 rpm after it warms up. can anyone help me with identifying this ecu to what specs i need to run right? Movie of idle that i can fit it cant rev past 3k MVI_0983.flv - Video - Photobucket - Video and Image Hosting ok its the MAF i think its tuned for z32 will be getting one in a few weeks let me know if anyone has one for sale for a good price. Last edited by FRoSt415; 07-31-2008 at 05:47 PM..

07-05-2008, 12:05 PM	#3
FRoSt415 Zilvia Junkie Join Date: Dec 2006 Location: san francisco Age: 34 Posts: 305 Trader Rating: (0) Feedback Score: 0 reviews	is it safe to drive with that plugged up and without a BOV?

07-05-2008, 02:58 PM	#5
FRoSt415 Zilvia Junkie Join Date: Dec 2006 Location: san francisco Age: 34 Posts: 305 Trader Rating: (0) Feedback Score: 0 reviews	sounds koo, i just need to drive it around a little and go to the muffler shop. no major boosting.

07-07-2008, 12:11 AM	#7
Joel 180 Leaky Injector Join Date: Aug 2003 Location: Perth Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	also do something with the t piece on the valve cover. You dont want to drip oil onto the exhaust manifold

07-09-2008, 11:19 AM	#8
FRoSt415 Zilvia Junkie Join Date: Dec 2006 Location: san francisco Age: 34 Posts: 305 Trader Rating: (0) Feedback Score: 0 reviews	cant find tab for the ground and pluged the hole but my idle is all messed up now what can i do? ill post a video in a day or so.

07-15-2008, 10:12 AM	#9
reccakun08 Zilvia FREAK! Join Date: Jun 2003 Location: Rockville, Maryland Age: 36 Posts: 1,090 Trader Rating: (5) Feedback Score: 5 reviews	yeah def plug the hole up (major boost leak) should stop you from stalling. Idle is messed up how? low/high idle or constantly moving around?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode