Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 11-10-2020, 02:09 PM   #1
struka
Zilvia Member
 
Join Date: Oct 2004
Location: Nashville.TN
Posts: 253
Trader Rating: (2)
struka is on a distinguished road
Feedback Score: 2 reviews
Send a message via AIM to struka
Speedo not working

Issue: Speedo isn't working

The car is a 1996 S14, the engine is KA24DE-T running S13 ECU (enthalpy). Trans is out of an s13 but the speed sensor is from S14.

Back story:
I did a 5spd swap back in 2005 and disconnected the speedo because it read twice as much (running an s13 trans). Never got a speed sensor so just unplugged it.

Finally wanted to fix my speedo so got an s14 speed sensor. Wired it directly up to the harness plug (green/black wires) that is located behind the relay box. Unfortunately with it wired up, it does not seem to work. According to the seller (acquaintance) of the speed sensor, it was working when removed.

Any ideas?
__________________
Team Rowdy
struka is offline   Reply With Quote
Sponsored Links
Old 11-10-2020, 02:13 PM   #2
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
Have u tried spinning the speedo by had or with a drill and see if it reads on the cluster? Could there be a gear mesh issue?
S14rebuild is offline   Reply With Quote
Old 11-10-2020, 03:10 PM   #3
struka
Zilvia Member
 
Join Date: Oct 2004
Location: Nashville.TN
Posts: 253
Trader Rating: (2)
struka is on a distinguished road
Feedback Score: 2 reviews
Send a message via AIM to struka
Quote:
Originally Posted by S14rebuild View Post
Have u tried spinning the speedo by had or with a drill and see if it reads on the cluster? Could there be a gear mesh issue?
I have not. But let me make sure I understand correctly. Are you saying having it wired up just like I have it but trying to spin the speed sensor outside of the transmission by hand or a drill?
__________________
Team Rowdy
struka is offline   Reply With Quote
Old 11-11-2020, 04:37 PM   #4
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
Yes, key on, sensor plugged in and spin the speedo see if the gauge works.
S14rebuild is offline   Reply With Quote
Old 11-16-2020, 11:50 AM   #5
DiscountPirate
Zilvia Member
 
Join Date: Jul 2016
Location: SoCal
Posts: 189
Trader Rating: (0)
DiscountPirate is an unknown quantity at this point
Feedback Score: 0 reviews
Unless you know and trust the person you got the sensor from, don't believe it when they say something is known good unless you bench test it yourself. I assume you already know there are s13 and s14 speed sensors, and you just need to use whichever one fits and matches cluster.
DiscountPirate is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™