Epoxied gas tank? Help! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mell0hYellow · 10-24-2013, 09:11 PM

So I just bought a 91 fastback and the previous owner had epoxied the fuel pump door of the gas tank. It died on me on the way to the car wash. Everything electrical is fine and it cranks. I do have spark and I hear the fuel pump priming but I'm pretty sure that its clogged as the rest of the inside is rather rusty. Problem is the epoxy is on there pretty good and I can't get it up to even pull the fuel pump out. Should I just get a new tank and pump assembly or does anyone have any advice to getting the epoxy off?

Mell0hYellow · 10-24-2013, 09:19 PM

Also is there any advice as to prevent clogs without having to remove the fuel pump door? Anything I can just dump in the tank?

UnknownGuy · 10-24-2013, 10:25 PM

for a long term fix I would get a new tank and fuel pump assembly, especially considering that they're really isn't any real such thing as draino for fuel tanks. Your best bet is to try and cut out as much epoxy out of the fuel pump assembly cover and pry it open with a small crow bar (make sure to be extra careful eapecially since your dealing with explosive gases). Get a PLASTIC fish tank scoop and try to scoop out any large debris out of the fuel take. Good luck

10-24-2013, 09:11 PM	#1
Mell0hYellow Join Date: Oct 2013 Location: Atlanta, Ga Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Epoxied gas tank? Help! So I just bought a 91 fastback and the previous owner had epoxied the fuel pump door of the gas tank. It died on me on the way to the car wash. Everything electrical is fine and it cranks. I do have spark and I hear the fuel pump priming but I'm pretty sure that its clogged as the rest of the inside is rather rusty. Problem is the epoxy is on there pretty good and I can't get it up to even pull the fuel pump out. Should I just get a new tank and pump assembly or does anyone have any advice to getting the epoxy off?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-24-2013, 09:19 PM	#2
Mell0hYellow Join Date: Oct 2013 Location: Atlanta, Ga Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Also is there any advice as to prevent clogs without having to remove the fuel pump door? Anything I can just dump in the tank?

10-24-2013, 10:25 PM	#3
UnknownGuy Zilvia Member Join Date: Jun 2006 Location: Long Beach, CA Posts: 206 Trader Rating: (12) Feedback Score: 12 reviews	for a long term fix I would get a new tank and fuel pump assembly, especially considering that they're really isn't any real such thing as draino for fuel tanks. Your best bet is to try and cut out as much epoxy out of the fuel pump assembly cover and pry it open with a small crow bar (make sure to be extra careful eapecially since your dealing with explosive gases). Get a PLASTIC fish tank scoop and try to scoop out any large debris out of the fuel take. Good luck