Starter Not Kickin? - KA24DE Swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Pro ViZIon · 02-24-2011, 07:59 PM

Hi everyone.

Ok so I just got my twin cam motor installed and all the wiring finished but my car doesn't want to crank. I checked the voltage at the solenoid wire on the harness and it reads like 11.2 volts.

I also swapped starters as well already.

Anybody know what may be happening?

Thanks in advance.

240ez · 02-25-2011, 05:15 PM

Is your battery good?
Check you wires going to your starter.
Make the negative and positive wires are on tight to the posts on the starter.

02-24-2011, 07:59 PM	#1
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 31 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	Starter Not Kickin? - KA24DE Swap Hi everyone. Ok so I just got my twin cam motor installed and all the wiring finished but my car doesn't want to crank. I checked the voltage at the solenoid wire on the harness and it reads like 11.2 volts. I also swapped starters as well already. Anybody know what may be happening? Thanks in advance. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-25-2011, 05:15 PM	#2
240ez Leaky Injector Join Date: Feb 2008 Location: L.A. Posts: 95 Trader Rating: (0) Feedback Score: 0 reviews	Is your battery good? Check you wires going to your starter. Make the negative and positive wires are on tight to the posts on the starter.