89 lip on a 91 bumper - install - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

smellslikecurry · 05-25-2004, 12:22 PM

just wondering - for those with an 89 lip on 91-94 bumper - how did u guys put them on?? personally i used took off the metal plates and used zip ties to put on the lip - its holding pretty well - i was wondering how else pple have put them on - anyone drill extra holes??

nokeone · 05-25-2004, 12:37 PM

zip ties...anything else is just extra work for no reason...

Will fastback SE · 05-25-2004, 12:56 PM

yep, zip ties are the key.

kuruptR · 05-25-2004, 01:31 PM

Lots of bending of the original bumper. had to fold it a little (its flimsy, coz it been cut for the intercooler).

The Zenki lip has the factory plastic holes every 5 inches, use a drill, put holes in your factory bumper and tie strap tight, if theres slightmovement in the lip; when the lip scraps it will brake the tie straps.

Tie Straps are the KEY.

jy116 · 05-31-2004, 08:14 PM

so theres no way to make it able to be put on and off?? ... like take it off for events where it will eat pavement... darn... I was going to look for the stock clips, but sounds like its not worth the effort.
Anyone use something besides zip ties?

TheTimanator · 05-31-2004, 08:38 PM

Quote:

Originally Posted by jy116

so theres no way to make it able to be put on and off?? ... like take it off for events where it will eat pavement... darn... I was going to look for the stock clips, but sounds like its not worth the effort.
Anyone use something besides zip ties?

zip ties are removeable...snip snip!

tie straps? whats the differenece btw that and sip ties?

05-25-2004, 12:22 PM	#1
smellslikecurry Post Whore! Join Date: May 2003 Location: bangladesh Age: 35 Posts: 4,588 Trader Rating: (33) Feedback Score: 33 reviews	89 lip on a 91 bumper - install just wondering - for those with an 89 lip on 91-94 bumper - how did u guys put them on?? personally i used took off the metal plates and used zip ties to put on the lip - its holding pretty well - i was wondering how else pple have put them on - anyone drill extra holes??

05-25-2004, 12:37 PM	#2
nokeone on strike three. Join Date: Mar 2003 Location: Santa Cruz, California Age: 42 Posts: 3,282 Trader Rating: (0) Feedback Score: 0 reviews	zip ties...anything else is just extra work for no reason... __________________ panda; rockin your socks from the Bay to LA to SD, yay! Pink GodziRa

05-25-2004, 12:56 PM	#3
Will fastback SE Leaky Injector Join Date: Apr 2003 Location: Miami, Fl- U.S Age: 38 Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	yep, zip ties are the key. __________________ Donations for MORE boost accepted here

05-25-2004, 01:31 PM	#4
kuruptR Zilvia FREAK! Join Date: Jan 2003 Location: UpNorth Posts: 1,046 Trader Rating: (1) Feedback Score: 1 reviews	Lots of bending of the original bumper. had to fold it a little (its flimsy, coz it been cut for the intercooler). The Zenki lip has the factory plastic holes every 5 inches, use a drill, put holes in your factory bumper and tie strap tight, if theres slightmovement in the lip; when the lip scraps it will brake the tie straps. Tie Straps are the KEY. __________________ @woooster on instagram

05-31-2004, 08:14 PM	#5
jy116 Zilvia Addict Join Date: Aug 2003 Location: Berkeley, CALifornia Posts: 785 Trader Rating: (0) Feedback Score: 0 reviews	so theres no way to make it able to be put on and off?? ... like take it off for events where it will eat pavement... darn... I was going to look for the stock clips, but sounds like its not worth the effort. Anyone use something besides zip ties? __________________ KYB AGX w/ dust boots $500obo... sadly serious

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode