|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
 |
|
|
Thread Tools | Display Modes |
04-12-2009, 09:33 PM
|
#1 |
|
Nissanaholic!
 
Join Date: Mar 2007
Location: Fascination Street,N.C
Age: 42
Posts: 1,701
Trader Rating: (31)
  Feedback Score: 31 reviews
 |
Bend Oil DIp Tube to CLear intake (GT2860)?
Bout ready to Crank my motor and Only need to get the intake worked out.
Running a SR20 w/ a GT2860 and seems even w/ an 90deg silicone Elbow (gonna try to use a Hump hose) to connect the 3inch Intake pipe, I may have to bend the Tube for it to clear everything.SOund weird? Anyone had problems w/ that (bottom mount set-up)? ----------------------------------------------------------- I Need to Try to Rig the Stock Intake & SR20 MAF (to the 3" inlet on the turbo) up 1st to get it running - to make sure everythings cool wiring wise once I 1st Crank up.....then put the 3" intake and N60MAF I'm gonna run to Tune from there? Any better ideas on that?^ may try to Run the Stock MAF w/ the 3" intake tube and filter if that will make it eaiser.
__________________
z-tERty-2 |
|
|
| Sponsored Links |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
