WA 2J / S14 Goods - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

alwyzDTF · 01-12-2015, 02:14 PM

Willing to ship at buyers expense.
Everything is in completely working condition unless posted otherwise.
LOWBALLERS WILL BE IGNORED

2JZ-GE Parts -
(Everything has new seals, sensors, tranny is in great condition)

oem intake manifold - $40

oem headers - $50

w58 transmission - $350

Stage 4 competition clutch (6 puck sprung) and CC Pressure Plate for the W58 - $350
(extremely mint I don't think its ever been driven on)

S14 OEM modded knuckles - $200
(Knuckles are Pre heated / Fillet welded then wrapped in 16gage cold rolled for extra strength and gusseted. This cut isn't crazy aggressive, mainly for more angle and Daily Drivable use.)

BNIB Z32 30mm oem replacement rotors - $140 shipped
(Bought what I thought were 30mm z32 calipers but turned out the dude didnt know what he was talking about and were 26mm so these are too big and I can't use them.)

SR20 downpipe (I think its circuit sport) - $50
minor scrape damage, no holes & works perfect

S14 SE OEM Front Sway Bar - $40
(Comes w/ endlinks)

S14 OEM High Pressure P/S hardline - $30

Stance 6kg 200mm springs - $50
(Came off my S14 rear Stance GR+ Pros, selling because I got Swifts)

S14 OEM Tension Rods - $20

S14 Rear Upper Control Arms - $20

S14 steering wheel - $50

S14 airbags - $50

S14 KA radiator - $40

S14 OEM front calipers (w/ new pads) - $50
SS lines - $50
front rotors - SOLD

s14 oem driveshaft - $70
(non ABS)

Z33 inner tie rods - $80

alwyzDTF · 01-15-2015, 01:42 PM

tons and tons of window shoppers. bump.

alwyzDTF · 01-17-2015, 12:37 PM

flakey ass flakes. more bumps.

alwyzDTF · 01-19-2015, 05:01 PM

tender springs pending.

alwyzDTF · 01-21-2015, 05:17 PM

tender springs should be sold tomorrow if everything goes as planned. bump.

MaxTheRabbit · 01-21-2015, 06:44 PM

payment sent for tenders

alwyzDTF · 01-23-2015, 11:05 PM

Stance tender springs sold.

alwyzDTF · 01-30-2015, 10:31 PM

weekend bump.w...

alwyzDTF · 02-01-2015, 05:37 PM

greddy pulleys sold!

01-12-2015, 02:14 PM	#1
alwyzDTF Zilvia Junkie Join Date: May 2011 Location: Washington Posts: 374 Trader Rating: (20) Feedback Score: 20 reviews	2J / S14 Goods Willing to ship at buyers expense. Everything is in completely working condition unless posted otherwise. LOWBALLERS WILL BE IGNORED 2JZ-GE Parts - (Everything has new seals, sensors, tranny is in great condition) oem intake manifold - $40 oem headers - $50 w58 transmission - $350 Stage 4 competition clutch (6 puck sprung) and CC Pressure Plate for the W58 - $350 (extremely mint I don't think its ever been driven on) S14 OEM modded knuckles - $200 (Knuckles are Pre heated / Fillet welded then wrapped in 16gage cold rolled for extra strength and gusseted. This cut isn't crazy aggressive, mainly for more angle and Daily Drivable use.) BNIB Z32 30mm oem replacement rotors - $140 shipped (Bought what I thought were 30mm z32 calipers but turned out the dude didnt know what he was talking about and were 26mm so these are too big and I can't use them.) SR20 downpipe (I think its circuit sport) - $50 minor scrape damage, no holes & works perfect S14 SE OEM Front Sway Bar - $40 (Comes w/ endlinks) S14 OEM High Pressure P/S hardline - $30 Stance 6kg 200mm springs - $50 (Came off my S14 rear Stance GR+ Pros, selling because I got Swifts) S14 OEM Tension Rods - $20 S14 Rear Upper Control Arms - $20 S14 steering wheel - $50 S14 airbags - $50 S14 KA radiator - $40 S14 OEM front calipers (w/ new pads) - $50 SS lines - $50 front rotors - SOLD s14 oem driveshaft - $70 (non ABS) Z33 inner tie rods - $80 Last edited by alwyzDTF; 02-01-2015 at 05:49 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-15-2015, 01:42 PM	#2
alwyzDTF Zilvia Junkie Join Date: May 2011 Location: Washington Posts: 374 Trader Rating: (20) Feedback Score: 20 reviews	tons and tons of window shoppers. bump.

01-17-2015, 12:37 PM	#3
alwyzDTF Zilvia Junkie Join Date: May 2011 Location: Washington Posts: 374 Trader Rating: (20) Feedback Score: 20 reviews	flakey ass flakes. more bumps.

01-19-2015, 05:01 PM	#4
alwyzDTF Zilvia Junkie Join Date: May 2011 Location: Washington Posts: 374 Trader Rating: (20) Feedback Score: 20 reviews	tender springs pending.

01-21-2015, 05:17 PM	#5
alwyzDTF Zilvia Junkie Join Date: May 2011 Location: Washington Posts: 374 Trader Rating: (20) Feedback Score: 20 reviews	tender springs should be sold tomorrow if everything goes as planned. bump.

01-21-2015, 06:44 PM	#6
MaxTheRabbit Zilvia Member Join Date: Feb 2005 Location: Richmond, VA Posts: 206 Trader Rating: (16) Feedback Score: 16 reviews	payment sent for tenders

01-23-2015, 11:05 PM	#7
alwyzDTF Zilvia Junkie Join Date: May 2011 Location: Washington Posts: 374 Trader Rating: (20) Feedback Score: 20 reviews	Stance tender springs sold.

01-30-2015, 10:31 PM	#8
alwyzDTF Zilvia Junkie Join Date: May 2011 Location: Washington Posts: 374 Trader Rating: (20) Feedback Score: 20 reviews	weekend bump.w...

02-01-2015, 05:37 PM	#9
alwyzDTF Zilvia Junkie Join Date: May 2011 Location: Washington Posts: 374 Trader Rating: (20) Feedback Score: 20 reviews	greddy pulleys sold!