Timing Issue - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s1495 · 03-31-2008, 07:28 PM

Hia people

This is on KA-T with '95 KA24DE.
What could be causing timing to be 30 BTDC. I recently replaced turbo and IACV - have 22 HG of vacuum so I know it's not leaking, idle is bit high - about 1100. TPS is around 0.45v, MAFs works, car misfires.

If I rotate distributor to the left (front of the motor), it gives me 30 BTDC. If I rotate to the right - I get about 44 BTDC.

I've tried setting TDC over and over several times but same result.

Any help would be appreciated.

Thanks

*slider2828* · 03-31-2008, 10:57 PM

Isn't the KA 20BTDC? Did it recently change? Was it right before?

murda-c · 03-31-2008, 11:01 PM

make sure your tps is unplugged when you check the timing.

otherwise the ecu might have fed some advance in.

03-31-2008, 07:28 PM	#1
s1495 Join Date: Mar 2006 Location: Waterloo, Ontario, Canada Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Timing Issue Hia people This is on KA-T with '95 KA24DE. What could be causing timing to be 30 BTDC. I recently replaced turbo and IACV - have 22 HG of vacuum so I know it's not leaking, idle is bit high - about 1100. TPS is around 0.45v, MAFs works, car misfires. If I rotate distributor to the left (front of the motor), it gives me 30 BTDC. If I rotate to the right - I get about 44 BTDC. I've tried setting TDC over and over several times but same result. Any help would be appreciated. Thanks

03-31-2008, 10:57 PM	#2
slider2828 Premium Member Join Date: Oct 2004 Location: San Francisco, CA Posts: 5,824 Trader Rating: (13) Feedback Score: 13 reviews	Isn't the KA 20BTDC? Did it recently change? Was it right before? __________________ Turn and Burn!

03-31-2008, 11:01 PM	#3
murda-c Post Whore! Join Date: Jan 2007 Location: Montgomery County, MD Age: 33 Posts: 3,197 Trader Rating: (1) Feedback Score: 1 reviews	make sure your tps is unplugged when you check the timing. otherwise the ecu might have fed some advance in. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode