Rick-95ZE

1997 SE, No rust, Conservative Dyno tune @ 480rwhp on 93 pump gas. %100 Garage kept and barely driven since purchased in 2005,2nd owner& Adult owned, Rebuilt title at 78K due to minor accident (I have photos) and currently has 86,001 original miles, that's right, Ive only put about 7k miles on this thing in the past 9 years. Interior is 9 out of 10 with no odor, exterior 8 out of 10 (original paint) I have most of the stock parts in storage including a mint condition hood. I ve invested over $26K (can provide receipts) I have photo documented this vehicle since purchased, and can provide extensive details of the build to a SERIOUS buyer. I'm in NO hurry to sell and if it doesn't, it will continue to sit in my garage.

"When considering the price, please keep in mind what it's worth to you making this type of purchase from a long time member of the forum with a trusted sales reputation dealing in some high dollar items."

$OLD! with Work wheels/tires
$OLD! with RH wheels/tires http://zilvia.net/f/showthread.php?t=574582


Custom A/C setup ( ICE COLD!! )
Factory tachometer re-calibrator module
Greddy intake manifold
ARP head studs
Greddy Head gasket
Greddy timing belt
New RB25 Water pump
Mckinney motor mount kit
Mckinney Drive shaft
Mckinney FMIC kit
Rick Rust custom down-pipe
Mckinney RB wiring service
Spec RB25 stage 3Plus clutch
Q45 throttle body
Cometic EM gasket
Apex-i power FC
z32 MAFS
SS Autochrome top mount manifold (modified)
GARRET GT35R (V-band,4''inlet,hot coated& polished)
Tial 44mm wastegate (V-band)
Apexi GT spec cat-back
Removed Cat converter, replaced with Vibrant Ultra Quiet Resonator 3"
Koyo radiator
FAL dual 12''cooling fans with shroud
Walbro 255 Fuelpump
Aeromotive FPR with gauge
Greddy -6an fuel rail adapter
Greddy profect B boost controller
Greddy profect turbo timer
Greddy Airinx large air filter
HKS 740cc injectors
AEM wideband gauge/02
Peak Performance rear upper camber arms
Megan Rear toe arms
HKS SS BOV
Nissan 130amp Quest Alternator
D-MAX CF HOOD (Painted black, & lined with HP 1100*F mat Heat shield thermal insulation )
s15 HLSD
Suspension Techniques front and rear anti sway bars
KYB AGX adjustable struts
Tanabe GF210 springs (currently running MR track coilovers with extension brackets but still have the other setup in storage)
Wilwood 4pot 13'' brakes (hawk HPS pads, front & rear)
NISMO front lip
NISMO front under brace
JDM Zenki rear valance
350z Seats
wheels and tires:
Work Vs-XX 18x10(+25) front
18x11(+27) rear
265/35 /18 & 315/30/18 Falken Azenis rt-615's

I've been asking a few times now about the carbon fiber peaces under my hood. Here is the Ebay based company that I got all of CF item from: http://www.ebay.com/itm/RB25DET-Carb...c3f918&vxp=mtr


In fact I was their guinea pig for their cooling panel. I had purchased the RB25 motor coverings and was so pleased with the quality that I contacted them and asked if they would make a cooling panel. Mine was their first prototype and it was perfect You might also notice that they used my photos for their sales add


I'm sure I've forgot to list some of the parts but if you're truly interested in buying it, I'll give you the complete list.

__________________

1997 Nissan 240sx SE(Rb25det+GT35r= 486whp on 93pump):http://zilvia.net/f/premium-member-b...oject-2-a.html

Fat Panda

No way this is my favorite car off all time!!

Rick-95ZE

You can drive it home today

__________________

1997 Nissan 240sx SE(Rb25det+GT35r= 486whp on 93pump):http://zilvia.net/f/premium-member-b...oject-2-a.html

allforthebenefit

if only you were closer lol

Fat Panda

If I only had the money.

frmdabak187

Very nice build my man! And thanks for the pro tip!
Someone buy this car!!

illipino_

dang this car was babied!! glws!

czarcasm

Well, since I registered Ive waited a week to post my first comment and I think this FS thread is it! Beautiful car and GLWS sir!

s14Art

How much I hate the "if only you were closer" statements. If any of you were interested in the car, no distance would be too far...

Beautiful car Rick. I didn't see anywhere on the thread where you said you're NOT interested in trades, so I thought I'd throw an offer your way.

I have a garage queen, meticulously maintained, E60 M5 in the highly sought after Interlagos Blue exterior and black interior. I have $8k Hartge Classic II wheels on it, but that's about it. She has considerably low miles, just hit 60k last week.

There are absolutely no issues with the car and I plan on keeping it forever, but your car is definitely on the list of cars that I'd like to own. If you're willing to trade and pay cash on your end, give me a call or email me. (818) 390-2786. I can send you detailed pictures.

Here's a link to a picture of her. Let me know if it works: http://instagram.com/p/ucRUGujzNU/?modal=true

Thanks,
Art

97nismo

What is a nismo front lip?

__________________
Feedback:
http://zilvia.net/f/itrader.php?u=78978

NY2NV Miner

what did you get the carbon fiber piece in front of the radiator in 2nd picture?

seagrasser

No holds barred RB25 build. Doesn't get any better than this. Bump for you

__________________
S14 RB25

s14Art

Waiting on a response regarding my offer. Meanwhile, here's a free bump.

Rick-95ZE

No problem, I'm glad that fixed the mirror issue

YES, it's most definitely lived a spoiled lifestyle over the past 9years.

Thank you for you appreciation
Thank you and I'm not completely apposed to a possible trade, however my standards are high and I'm very selective on what I'd want to replace my "toy car" with. I already have two VERY NICE daily drivers and two motorcycles so taking a daily driver style vehicle is less appealing (not saying yours is daily status) . I've had two possible trade offers come my way so far (not including yours) and the only issues Ive had is they set the market value of their vehicles at full retail, or what THEY feel would be their ideal selling price, and wanted mine for a "haggled price", which isn't going to happen. Again, I have $26k in receipts and I FEEL I could sell mine for $18k. However, I'm very aware that there is a CASH ONLY price cap on a modified 240sx (regardless of the swap) but when you're taking trade, I feel the rules change. I think its realistic for me (the seller) to come out on top or get the better end of a trade deal. Honestly unless its obviously to my advantage to trade, I'm probably going to pass. Again, I have no reservations about letting the 240 continue to sit in my garage, as who knows, the market for the 240 might improve.

Having said that I WOULD like to see more info and pics of your bimmer

I heard it called that once, sounded cool, so that's what I called it. In case you were serious, its the front lip spoiler..

Purchased all of the CF pieces from the same place, it was a new company out of Miami FL. I can't remember the name right off hand but they were Ebay based, I'll have to get back to you on that. It's VERY high quality stuff though

Thank you

Sorry, I've had a lot on the plate over the past few days.

__________________

1997 Nissan 240sx SE(Rb25det+GT35r= 486whp on 93pump):http://zilvia.net/f/premium-member-b...oject-2-a.html

Rick-95ZE

Would like to add that when considering my price, please keep in mind what it's worth to you making this type of purchase from a long time member of the forum with a trusted sales reputation dealing in a few high dollar items.

__________________

1997 Nissan 240sx SE(Rb25det+GT35r= 486whp on 93pump):http://zilvia.net/f/premium-member-b...oject-2-a.html

Darius

GLWS... I have a feeling your meticulously cared-for S14 with RB25 swap will also go unsold due to lack of finances available to our target market. I started my 700HP RB25 out at $30k and am down to $19k with minimal interest...except guys with Subaru's! They will bombard you with trades for their $14k 2010 stock WRX STI.

s14Art

Awesome Rick,

Do you have a phone number or email address we can continue our conversation on?

om3ga

Always great seeing real quality builds on the market. GLWS

EJEZ33

Bravo! ���� it's so great to see someone do a "real build" with "real parts" quality is king!
I wish I had the money, and my 350Z was done and sold. GLWS bro! And thank you for showing what a real 240 build is!

Rick-95ZE

I've been asking a few times now about the carbon fiber peaces under my hood. Here is the Ebay based company that I got all of CF item from: http://www.ebay.com/itm/RB25DET-Carb...c3f918&vxp=mtr


In fact I was their guinea pig for their cooling panel. I had purchased the RB25 motor coverings and was so pleased with the quality that I contacted them and asked if they would make a cooling panel. Mine was their first prototype and it was perfect You might also notice that they used my photos for their sales add

__________________

1997 Nissan 240sx SE(Rb25det+GT35r= 486whp on 93pump):http://zilvia.net/f/premium-member-b...oject-2-a.html

oldschoolsilvia

So good!

GLWS

s14Art

Rick, check your email

Winkler22

Love the car man! GLWS. What seats are those?

vert888

Wow she is a beauty, good luck with the sale

s14Art

Sold to me

Rick-95ZE

__________________

1997 Nissan 240sx SE(Rb25det+GT35r= 486whp on 93pump):http://zilvia.net/f/premium-member-b...oject-2-a.html

Syncade

This sold fast! Beautiful car. Best wishes to new owner (dont fuck it up!)

__________________
Jets > Cars

seagrasser

Awesome, baller s14 going to west coast

__________________
S14 RB25

s14Art

Thanks man! Only plans with the car are Work Meisters, and either stock s14 se seats to keep it original and match with the door cards and rear seats...OR some fresh Corbeaus