KA24DE Compression Test without Intake Manifold - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*Ros7.exe* · 10-12-2018, 10:33 PM

Quick background. I have an s14 motor that has been sitting for a while now. I forget if it was in running condition or not when pulled. As it was sitting I started pulling parts off it. My question is if it possible to run a compression test without the intake manifold on it? I just want to throw on a starter with spacers and turn it over for the test. If you have any knowledge about it let me know.

Kingtal0n · 10-13-2018, 07:54 AM

The valve opens, air goes in, the valve shuts, compression occurs.

The intake manifold only gets in the way. Would that all compression tests occur with no intake manifold.

10-12-2018, 10:33 PM	#1
Ros7.exe Premium Member Join Date: Mar 2012 Location: turlock ca Age: 29 Posts: 315 Trader Rating: (1) Feedback Score: 1 reviews	KA24DE Compression Test without Intake Manifold Quick background. I have an s14 motor that has been sitting for a while now. I forget if it was in running condition or not when pulled. As it was sitting I started pulling parts off it. My question is if it possible to run a compression test without the intake manifold on it? I just want to throw on a starter with spacers and turn it over for the test. If you have any knowledge about it let me know.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-13-2018, 07:54 AM	#2
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 38 Posts: 4,649 Trader Rating: (17) Feedback Score: 17 reviews	The valve opens, air goes in, the valve shuts, compression occurs. The intake manifold only gets in the way. Would that all compression tests occur with no intake manifold.