rb25 hunting idle stalling when warm - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mmakam2 · 03-02-2013, 10:00 AM

I have emanage ultimate and I have set the anti stall setting and the idle adjustment, also I tried the screw on the IAC. I checked for boost/vacuum leaks, and there are none. I have a series 2 motor with the dual plug tps on the q45 tb. I know one of the plugs is for idle validation or something, if anyone knows anything about this pleeeeeese chime in, I'm stalling at every traffic light

mmakam2 · 03-02-2013, 03:26 PM

Solved: the second plug was a continuity switch for the idle, it wasn't activated when closed. Adjusted the tps so the voltage was .45 at close, and idle switch was on, now idles perfect.

03-02-2013, 10:00 AM	#1
mmakam2 Leaky Injector Join Date: Jul 2011 Location: chicago Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	rb25 hunting idle stalling when warm I have emanage ultimate and I have set the anti stall setting and the idle adjustment, also I tried the screw on the IAC. I checked for boost/vacuum leaks, and there are none. I have a series 2 motor with the dual plug tps on the q45 tb. I know one of the plugs is for idle validation or something, if anyone knows anything about this pleeeeeese chime in, I'm stalling at every traffic light

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-02-2013, 03:26 PM	#2
mmakam2 Leaky Injector Join Date: Jul 2011 Location: chicago Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	Solved: the second plug was a continuity switch for the idle, it wasn't activated when closed. Adjusted the tps so the voltage was .45 at close, and idle switch was on, now idles perfect.