Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 12-24-2005, 01:07 AM   #1
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Z32 MAF Install SR20DET (Pics)

Well here is my next addition. I have a shitload of parts I have to install, today I tackled the Z32 MAF. Easy right? In and out? Well not exactly so I made sure to document the Issues I had and the fixes. There are more than one way to install. This is myway and it worked:

Items Needed:
Z32 MAFS
Intake that fits the Z32 MAFS
80MM Grommet
2 80mm Hose Clamps
80MM to 60MM Aluminum Pipe
Wire Harness
Steel bar for support
Electrical Tape
Wire Connectors
Tools
This write up may help. If it does, give me some points please

**Disconnect your negative Battery Terminal**
Okay well getting started, I ran into an immediate problem. The Z32 MAFS intake side did no fit the APEXi Intake I had been usuing with my stock MAFS.
Fix was, I bought a new APEXi Intake. I swear by the APEXi, my old one with adapter piping is for sale as well.


Okay to attach the MAFS to the Intake depends on the intake itself..make sure you keep hold of the little rubber gasket ring that goes bewteen the MAFS and the Intake, it sits in a little valley type area on the MAFS. Then use a paper style gasket between the intake and the MAFS and use the 4 screws to secure it nice and tight.

Okay now pull out your old MAFS and Intake and you will see the next problem.


The Stock MAFS has an 60mm exit to the stock compressor pipe...your new Z32 MAFS has an 80mm one. I eventually plan on getting a full aluminum pipe made that will go all the way up from the compressor to the intake, but for now I had to improvise cause I hate to stop in the middle of sh1t unless it is for beer or good head from a hottie...so what I did was headed down to the speed shop and bought an 80mm to 60mm reducing pipe and a gromet...


See you can't just use a reducing grommet, becuase the stock compressor piping is rubber if you used a rubber style gromet it would collapse..you need something strong in there that wont collapse. Use two hose clamps and attach the MAFS with installed intake to the Reducing pipe using the grommet. Once your done it should look like this, mine looks like an F15 motor now:


Then put the pipe in. You can slide it down the stock rubber compressor tube and use the stock hode clamp to secure it on the 60mm end of the reducter. Push it in as far as you can, there isnt much room. It will look like this now, and yes I had just enough room...



it is time to cut the harness you are looking at in the picture above....make sure you cut it about 2 cm's from the tip. This way it can still be used again.
Then get your wire diagram and wire the stuff up:

Here is the breakdown using the Harness I bought for 20 Bucks..
From Right to Left:
White - to White on the stock Harness
Black - to Ground on the car
Black - to the Black on the Stock harness
Red - to the Black and White stripes wire on the Stock Harness

Attach all of the wires from the new Z32 Harness to your stock wire cluster...use the direction above. You can either solder the wires (preffered) or do what I did. I just used wire connectors and crimped them together, then wrapped the harness in black tape. I didnt wanna do it permanantly with solder yet since I am going to have an intake pipe made for me later and may have to reduce the harness length.
Then you will still have the ground wire to deal with...I extended the ground wire and set it right below my profec motor..but there are plenty of places to ground it at..


Okay now here is what the finish product will look Like installed...The only thing left to do is reconnect your battery cable and start up. If you have an SAFC II like me, you will have to make an adjustment in the ETC menu prior to startup. Go into ETC, choose Sensor Type, choose HW and In "2" and Out "6":

Next write up is 550's and AEM UEGO wideband install
Late
Daryl
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Sponsored Links
Old 12-24-2005, 01:35 AM   #2
HyperTek
Post Whore!
 
Join Date: Mar 2003
Location: Cali
Posts: 13,222
Trader Rating: (3)
HyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfectionHyperTek is close to perfection
Feedback Score: 3 reviews
I didnt know the Shocker was required for the install.. hehehe jk.. Nice write up
__________________
Keep it Classy
HyperTek is offline   Reply With Quote
Old 12-24-2005, 02:55 AM   #3
caall99
Zilvia Member
 
caall99's Avatar
 
Join Date: Apr 2005
Location: Wellesley, MA
Age: 36
Posts: 267
Trader Rating: (0)
caall99 is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to caall99
your write-ups are awesome! keep em comin'!
__________________
Signature over limits
http://www.zilvia.net/f/showthread.php?t=21036
caall99 is offline   Reply With Quote
Old 12-24-2005, 03:35 AM   #4
95zilvia
Nissanaholic!
 
Join Date: Jun 2003
Location: South San Francisco
Age: 37
Posts: 1,860
Trader Rating: (0)
95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light95zilvia is a glorious beacon of light
Feedback Score: 0 reviews
We should make your own section, you are the bomb diggity. +++++
95zilvia is offline   Reply With Quote
Old 12-24-2005, 03:47 AM   #5
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Wow Thanks Guys! That means a lot..I have a few I havent posted...like the Acuator Install I did last weekend when I though mine was bad
you guys could always give me some rep points
J/K
Late
Daryl
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-24-2005, 07:05 PM   #6
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Thanks for all the Rep's guys!
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-24-2005, 07:52 PM   #7
vutony
Post Whore!
 
vutony's Avatar
 
Join Date: Jul 2005
Location: (714) OC area
Posts: 5,255
Trader Rating: (144)
vutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfection
Feedback Score: 144 reviews
nicely done....this was gonna be my next mod and now made it much easier
vutony is offline   Reply With Quote
Old 12-24-2005, 08:33 PM   #8
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Quote:
Originally Posted by vutony
nicely done....this was gonna be my next mod and now made it much easier

Glad I could help!
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-25-2005, 10:23 AM   #9
vutony
Post Whore!
 
vutony's Avatar
 
Join Date: Jul 2005
Location: (714) OC area
Posts: 5,255
Trader Rating: (144)
vutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfection
Feedback Score: 144 reviews
quick question...would the install with a R33 maf be the same...which is better the Q45 maf or Z32 maf...lmk....thanks
vutony is offline   Reply With Quote
Old 12-25-2005, 11:40 AM   #10
WILDACEX187
Post Whore!
 
WILDACEX187's Avatar
 
Join Date: Jan 2003
Location: QUEENZ, NYC
Age: 38
Posts: 3,103
Trader Rating: (4)
WILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond reputeWILDACEX187 has a reputation beyond repute
Feedback Score: 4 reviews
Send a message via AIM to WILDACEX187
awesome write up daryl. as stated before you are the BOMB lol
__________________
SR POWA COUPE LUVVV!!!
WILDACEX187 is offline   Reply With Quote
Old 12-25-2005, 04:17 PM   #11
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Thanks WIldace!!!

Quote:
Originally Posted by vutony
quick question...would the install with a R33 maf be the same...which is better the Q45 maf or Z32 maf...lmk....thanks
Z32 Flows better than the Q45...There is not a better MAFS to use...Discussion came up locally and found out nothing beats the Z32...now are you saying you want to install an RB25DET or RB26DETT MAFS on an SR20DET? I wouldnt do it...The GTR MAFS have no where near the flow as the Z32..I can prove it if need be with a test done..but I would have to find the file to upload..
Late
Daryl
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-25-2005, 04:59 PM   #12
ThatGuy
Admin Asshole
 
ThatGuy's Avatar
 
Join Date: Mar 2002
Location: Retired
Age: 41
Posts: 20,394
Trader Rating: (0)
ThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfection
Feedback Score: 0 reviews
Very well done, bjorkluv. Thank you for adding something positive to Zilvia.net.
__________________
"Speak softly,..." -Pres. Teddy Roosevelt
"Be polite, be professional, ..." -Gen. James Mattis
ThatGuy is offline   Reply With Quote
Old 12-25-2005, 05:17 PM   #13
vutony
Post Whore!
 
vutony's Avatar
 
Join Date: Jul 2005
Location: (714) OC area
Posts: 5,255
Trader Rating: (144)
vutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfectionvutony is close to perfection
Feedback Score: 144 reviews
Quote:
Originally Posted by bjorkluv
Thanks WIldace!!!



Z32 Flows better than the Q45...There is not a better MAFS to use...Discussion came up locally and found out nothing beats the Z32...now are you saying you want to install an RB25DET or RB26DETT MAFS on an SR20DET? I wouldnt do it...The GTR MAFS have no where near the flow as the Z32..I can prove it if need be with a test done..but I would have to find the file to upload..
Late
Daryl

its goin on a sr20...i probally gonna get the z32 anyhow...thanks
vutony is offline   Reply With Quote
Old 12-25-2005, 07:31 PM   #14
mrmephistopheles
Inactive Admin
 
mrmephistopheles's Avatar
 
Join Date: Mar 2002
Location: BFE
Age: 19
Posts: 14,334
Trader Rating: (9)
mrmephistopheles has disabled reputation
Feedback Score: 9 reviews
copied into archive
__________________


Quote:
Originally Posted by PHLIP
just a sec, embarrassing someone
mrmephistopheles is offline   Reply With Quote
Old 12-25-2005, 08:35 PM   #15
nsn240
Zilvia Addict
 
nsn240's Avatar
 
Join Date: Aug 2005
Location: pa
Posts: 641
Trader Rating: (1)
nsn240 is on a distinguished road
Feedback Score: 1 reviews
Send a message via AIM to nsn240
awesome writeup! excellent work
nsn240 is offline   Reply With Quote
Old 12-25-2005, 09:24 PM   #16
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
ThatGuy - Thanks Brother, Semper.

mrmephistopheles - Woo Hoo, my second one in the archives

vutony - Yeah Get the Z32 man...

nsn240 - thanks brother
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-26-2005, 12:23 AM   #17
mr_240sx
Post Whore!
 
mr_240sx's Avatar
 
Join Date: Nov 2004
Location: Ottawa
Age: 35
Posts: 6,320
Trader Rating: (4)
mr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfection
Feedback Score: 4 reviews
Send a message via AIM to mr_240sx Send a message via MSN to mr_240sx
awesome write up bro!! i have to tackle that in next month or so.... ive had my z32 maf sitting on my night table since september.... but ive been really busy with work so hopefully ill get time before spring to install it!
mr_240sx is offline   Reply With Quote
Old 12-26-2005, 12:34 AM   #18
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Quote:
Originally Posted by mr_240sx
awesome write up bro!! i have to tackle that in next month or so.... ive had my z32 maf sitting on my night table since september.... but ive been really busy with work so hopefully ill get time before spring to install it!

Thanks man...woah your pink
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-26-2005, 08:05 PM   #19
Nofatchicks
BANNED
 
Join Date: Dec 2005
Location: Reading, PA
Posts: 9
Trader Rating: (0)
Nofatchicks is an unknown quantity at this point
Feedback Score: 0 reviews
im still wondering how it needs a write up. I know many people who did it and never had a problem or expierence. I did it myself without even a diagram since Heavy Throttle forgot to send the paper work for the turbo upgrade kit. I did the injectors, Z32, and install all without paperwork.
Nofatchicks is offline   Reply With Quote
Old 12-26-2005, 08:11 PM   #20
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Quote:
Originally Posted by Nofatchicks
im still wondering how it needs a write up. I know many people who did it and never had a problem or expierence. I did it myself without even a diagram since Heavy Throttle forgot to send the paper work for the turbo upgrade kit. I did the injectors, Z32, and install all without paperwork.

Congrats!!!!!
1. Everyone is not as cool as you.
2. Some May have questions before they do an install like this.
3. SOme do not want to jack their sh1t up so search to see if someone has done the same install before, this will be there for them in that situation.
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-26-2005, 09:38 PM   #21
nissantuner22
Zilvia FREAK!
 
nissantuner22's Avatar
 
Join Date: Mar 2004
Location: Gainesville, Fl
Age: 36
Posts: 1,056
Trader Rating: (-1)
nissantuner22 is on a distinguished road
Feedback Score: -1 reviews
Send a message via AIM to nissantuner22
no fat chicks just got served
__________________

Current Project: Operation: N/A SR: 93 Silvia Q SR20DE Engine with go fast goodies. ,
"Common problems 240sx's suffer from are curbs, trees, ditches, and other immovable objects."thx247

"on the tounge... there is no guardrails."- citizen
nissantuner22 is offline   Reply With Quote
Old 12-27-2005, 08:51 PM   #22
Nofatchicks
BANNED
 
Join Date: Dec 2005
Location: Reading, PA
Posts: 9
Trader Rating: (0)
Nofatchicks is an unknown quantity at this point
Feedback Score: 0 reviews
You must not be the smartest person in the world if you cannot install it. Its 4 wires and 4 bolts. Seriously.... darwinism is in effect. Too stupid to install... too stupid to drive. HAHAHAH
Nofatchicks is offline   Reply With Quote
Old 12-27-2005, 08:59 PM   #23
mr_240sx
Post Whore!
 
mr_240sx's Avatar
 
Join Date: Nov 2004
Location: Ottawa
Age: 35
Posts: 6,320
Trader Rating: (4)
mr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfectionmr_240sx is close to perfection
Feedback Score: 4 reviews
Send a message via AIM to mr_240sx Send a message via MSN to mr_240sx
Quote:
Originally Posted by Nofatchicks
You must not be the smartest person in the world if you cannot install it. Its 4 wires and 4 bolts. Seriously.... darwinism is in effect. Too stupid to install... too stupid to drive. HAHAHAH
easy ...... this question is asked quite often so i think its great that theres now a How-to on this,...... hopefully it will stop all the new threads asking how to do it.
mr_240sx is offline   Reply With Quote
Old 12-27-2005, 09:31 PM   #24
ThatGuy
Admin Asshole
 
ThatGuy's Avatar
 
Join Date: Mar 2002
Location: Retired
Age: 41
Posts: 20,394
Trader Rating: (0)
ThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfectionThatGuy is close to perfection
Feedback Score: 0 reviews
NoFatchicks, at only 8 posts in to Zilvia.net, I do not appreciate your attitude or how you choose to treat other members. You are PINKED for 3 months. Hopefully you will learn to get your point across without trying to belittle others. If you don't, your time on Zilvia.net will be cut short.
__________________
"Speak softly,..." -Pres. Teddy Roosevelt
"Be polite, be professional, ..." -Gen. James Mattis
ThatGuy is offline   Reply With Quote
Old 12-27-2005, 10:20 PM   #25
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Really man, it may seem easy to you. Was easy for me. People like pictures and they like to read ahead when installing parts. Everyone is not comfortable with tools. The purpose, well one of the purposes of forums like these are for sharing information and helping each other out. I am a member and moderator of other forums and try and share my knowledge. There was a time 15 years ago or so that I could not change the oil in my own car...those people are still out there. They are learning. A thread like this is not designed for opinions that are negative. I took pics and Typed a whole lot of sh1t to make the write up. I am a Jarhead so typing is not that easy for me. If you don't think the post is worthy move on and Have a nice day.

For all that are interested here is a write up I did on installing some fuel components:
http://www.zilvia.net/f/showthread.php?t=94575

I plan on installing a wideband and 550's this weekend, we will see if the weather holds up..
late
daryl
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-28-2005, 04:26 AM   #26
tailwaggin91
 
Join Date: Dec 2005
Location: South San Francisco
Posts: 5
Trader Rating: (0)
tailwaggin91 is an unknown quantity at this point
Feedback Score: 0 reviews
Don't know who's aware of this or has more info, but I was advised that you should look for an orange sticker on the airflow meter. Luckily mine was correct, but I believe it's color coded by engine, orange being VG30DETT. Sorry if it's already known, but I thought it'd be appropriate to post in an install section.
tailwaggin91 is offline   Reply With Quote
Old 12-28-2005, 05:20 AM   #27
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Quote:
Originally Posted by tailwaggin91
Don't know who's aware of this or has more info, but I was advised that you should look for an orange sticker on the airflow meter. Luckily mine was correct, but I believe it's color coded by engine, orange being VG30DETT. Sorry if it's already known, but I thought it'd be appropriate to post in an install section.
You are looking for these numbers/letters on the MAFS. You can see in my firt pic if you zoom.
22680-30P00
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-28-2005, 05:42 AM   #28
TOMKAIRA93
Zilvia Addict
 
Join Date: Dec 2005
Location: San Antonio, TX
Age: 43
Posts: 696
Trader Rating: (3)
TOMKAIRA93 is making a name for him/her selfTOMKAIRA93 is making a name for him/her self
Feedback Score: 3 reviews
Hey thanks for the step by step install of the MAF. I just picked up an S-AFC today and I was thinking on installing it along with my z32 MAF tomorrow. Your thread just made it alot easier for me. Now I don't have to figure out the cables, thus saving me a lot of time. Since I'm in Japan I'm still trying to figure out two cables from the S-AFC since everything is in Japanese. I can read a little hiragana and Katakana, but not Kanji (three different type of writing in the Japanese Language). Any how, thanks again for your post and don't pay attention to the haters. LOL I'll post pics of my set up once I'm done with it. Peace!
__________________
TOMKAIRA93 is offline   Reply With Quote
Old 12-28-2005, 02:18 PM   #29
kuramaya
Nissanaholic!
 
Join Date: Dec 2004
Location: 沖縄 , Japan
Age: 48
Posts: 1,677
Trader Rating: (1)
kuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfectionkuramaya is close to perfection
Feedback Score: 1 reviews
Quote:
Originally Posted by TOMKAIRA93
Hey thanks for the step by step install of the MAF. I just picked up an S-AFC today and I was thinking on installing it along with my z32 MAF tomorrow. Your thread just made it alot easier for me. Now I don't have to figure out the cables, thus saving me a lot of time. Since I'm in Japan I'm still trying to figure out two cables from the S-AFC since everything is in Japanese. I can read a little hiragana and Katakana, but not Kanji (three different type of writing in the Japanese Language). Any how, thanks again for your post and don't pay attention to the haters. LOL I'll post pics of my set up once I'm done with it. Peace!
Hey I am in Okinawa too, I have english manuals for the install. But you can download the english user/installation manual here:
http://www.apexi-usa.com/support_installation.asp

and also the wiring diagram for installation here
http://www.apexi-usa.com/support_wiring.asp

Also there is a forum for all of us car guys on Okinawa, I am Kuramaya on there:
http://www.zeroyon.com
Just tell them I sent ya!
__________________
ZEROYON WEBSITE IS HOMO
NEW SITE: blacklinux.com/innersanctum/index.php
kuramaya is offline   Reply With Quote
Old 12-28-2005, 02:56 PM   #30
TOMKAIRA93
Zilvia Addict
 
Join Date: Dec 2005
Location: San Antonio, TX
Age: 43
Posts: 696
Trader Rating: (3)
TOMKAIRA93 is making a name for him/her selfTOMKAIRA93 is making a name for him/her self
Feedback Score: 3 reviews
I just looked at the diagram in english and it doesn't match the japanese one. The english one says 240sx so am assuming its for a KA application and not SR.
For some reason I went to this site yesterday and couldn't find anything. I downloaded the manual, like 50 pages, and didn't find anything. I think I just need to figure out one more cable and I'll be alright. Thanks again for all the links, I'll try the Oki forum. Thanks bro!
__________________
TOMKAIRA93 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™