Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 07-26-2017, 01:56 PM   #1
alwaysnboost
Zilvia Member
 
alwaysnboost's Avatar
 
Join Date: Sep 2015
Location: Morris County
Posts: 279
Trader Rating: (1)
alwaysnboost is an unknown quantity at this point
Feedback Score: 1 reviews
Cooling panels

General question: I have a Stroker 402 ls swap and wondering how many out there are running cooling panels in their cars. Top and bottom. Reason I ask is because at idle or in heavy traffic my engine temps will creep very slowly 1 degree every two or so minutes which tells me I may have a engine heat ventilation issue. Once i start driving temps subside back to 180-190 Ish. Here are my cooling ancillaries.

-Mishi radiator
-Two dual spal 12 inch puller fans approx 4K cfm. On at 185 off at 170
-160 motorad t stat
-gto water pump.
-rear blocked off coolant lines front connected to overflow tank.


Sent from my iPhone using Tapatalk
alwaysnboost is offline   Reply With Quote
Sponsored Links
Old 07-26-2017, 08:33 PM   #2
alwaysnboost
Zilvia Member
 
alwaysnboost's Avatar
 
Join Date: Sep 2015
Location: Morris County
Posts: 279
Trader Rating: (1)
alwaysnboost is an unknown quantity at this point
Feedback Score: 1 reviews
Forgot to add once the hood is popped the temps drop down to 195 steady
alwaysnboost is offline   Reply With Quote
Old 07-27-2017, 07:50 AM   #3
tuzzio
Nissanaholic!
 
tuzzio's Avatar
 
Join Date: Oct 2013
Location: Western Mass.
Posts: 2,254
Trader Rating: (3)
tuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond reputetuzzio has a reputation beyond repute
Feedback Score: 3 reviews
I would assume that cooling panels only will help while driving, not while sitting.
tuzzio is online now   Reply With Quote
Old 07-29-2017, 10:28 PM   #4
Tiles
 
Join Date: Jul 2017
Location: FL
Age: 27
Posts: 8
Trader Rating: (0)
Tiles has a spectacular aura aboutTiles has a spectacular aura aboutTiles has a spectacular aura aboutTiles has a spectacular aura aboutTiles has a spectacular aura aboutTiles has a spectacular aura about
Feedback Score: 0 reviews
Do you have a shroud for the fans or are they just mounted directly to the radiator?
Tiles is offline   Reply With Quote
Old 07-30-2017, 12:23 AM   #5
QTR FMS
 
Join Date: Feb 2016
Location: irvine
Posts: 4
Trader Rating: (0)
QTR FMS is an unknown quantity at this point
Feedback Score: 0 reviews
im just wondering what is your oil temperature?
QTR FMS is offline   Reply With Quote
Old 07-30-2017, 01:10 AM   #6
jdm213
Zilvia Addict
 
jdm213's Avatar
 
Join Date: Sep 2009
Location: los angeles
Age: 31
Posts: 957
Trader Rating: (10)
jdm213 is an unknown quantity at this point
Feedback Score: 10 reviews
No only that u shouldn't be using cooling panels to fix it issue I should fix why it's creeping up in the first place
jdm213 is offline   Reply With Quote
Old 07-30-2017, 01:45 AM   #7
Kingtal0n
Post Whore!
 
Kingtal0n's Avatar
 
Join Date: Jul 2005
Location: South Florida
Age: 38
Posts: 4,649
Trader Rating: (17)
Kingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond reputeKingtal0n has a reputation beyond repute
Feedback Score: 17 reviews
Send a message via AIM to Kingtal0n
4 steam ports need to run to the top tank of the radiator. Do not block rear steam port lines.
if not running a heater core, block the heater lines in the water pump with tap and plug. Do not loop.

Use high quality fans, I used Altima 93-97 fans (ebay $75) and a throw-away aluminum radiator (ebay $90) and my LS swap stays cool running only 1 fan. And I am single turbo, exhaust pipe runs all over the engine bay.
Kingtal0n is offline   Reply With Quote
Old 07-30-2017, 06:01 AM   #8
alwaysnboost
Zilvia Member
 
alwaysnboost's Avatar
 
Join Date: Sep 2015
Location: Morris County
Posts: 279
Trader Rating: (1)
alwaysnboost is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Tiles View Post
Do you have a shroud for the fans or are they just mounted directly to the radiator?
I do have fan shrouds
alwaysnboost is offline   Reply With Quote
Old 07-30-2017, 06:06 AM   #9
alwaysnboost
Zilvia Member
 
alwaysnboost's Avatar
 
Join Date: Sep 2015
Location: Morris County
Posts: 279
Trader Rating: (1)
alwaysnboost is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Kingtal0n View Post
4 steam ports need to run to the top tank of the radiator. Do not block rear steam port lines.
if not running a heater core, block the heater lines in the water pump with tap and plug. Do not loop.

Use high quality fans, I used Altima 93-97 fans (ebay $75) and a throw-away aluminum radiator (ebay $90) and my LS swap stays cool running only 1 fan. And I am single turbo, exhaust pipe runs all over the engine bay.
Thank you for this information. I'm still running a heater core so I don't need to block the lines. As far as the steam port the two towards the front of the motor are joined and ran to my expansion tank. Are you saying the rears need to be joined and ran to the expansion tank too?

One more question: what is your current engine temp at idle and while cruising?
alwaysnboost is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:52 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™