zo6 ls1 in a 240sx? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dirty fast · 05-28-2005, 10:53 PM

Hey guy I was wondering about how to tell if my car has an lsd in it buy looking at the vin or some other special feature on the car. The car is a 1996 se 240. And what gear ratio am I looking at in the rear end? I am dropping a zo6 vette motor into the car in two weeks. We did the math and the ls1 weighs 20-30 lbs. More than the stock motor and trans. I have the motor trans and every thing else. I am sure other people have done this swap. If any one has any info or pics of the ls1’s in 1995’s and up hook me up. I have some pars for sale for the 1995- and up cars so let me know. Thanks Jeffrey g

infinitexsound · 05-29-2005, 12:32 AM

this is getting old

AJ · 05-29-2005, 12:47 AM

Aries <-- i think that was his nick did it. I'm quite possitive he swapped a lt1 though. Might want to get in contact with him if your serious.

matlock · 05-29-2005, 01:09 AM

I think you better put a wheelie bar on the car too and a parachute that would be cool, oh yeah and a "BADASS BOWTIE" decal would also spruce it up. If you are serious good luck.

TheSnail · 05-29-2005, 01:16 AM

If you got a "zo6" ls1 for your 240, I'm sure your would have seen pics of a ls1 in a 240 rather then requesting pics. I call BS until further proof.

BlackZenkiS14 · 05-29-2005, 01:18 AM

Jack the car up and spin the tires. Either way though, i dont think that rear end wont handle 405+ WHP and TQ. THew rear gears are 4.08 's and like everyone else said, if your serious, good luck, and keep us updated.

TheTicTac · 05-29-2005, 06:17 AM

AWESOME! LS1 is the new SR20!!!

MakotoS13 · 05-29-2005, 07:51 AM

FYI: there isn't a z06 in existence with an LS1.

you, sir, are an idiot. if you have to ask this crap then you shouldn't be doin the swap.

**Phlip** · 05-29-2005, 08:29 AM

I call troll, personally

dirty fast · 05-29-2005, 08:43 AM

Ok guys I got the motor for $2700, only because I know lots of people. I am going to be using a 700r automatic traney, and a b&m pro stick. The drive shaft we figured will cost about $150 to make. Getting the car wired will cost me $300. I plan on using edit ls1 for my computer program to fix any small check engine lights and if I plan to use turbos or nitrous. Yea I am very serious about doing this. I have seen two cars on the net that have done this swap. I figure you guys would know about more people who have done that kind of a swap. So the car has 4.10 gears? If any body is planning to be in the Panama City fl. Area you can stop buy and see it.

raen419 · 05-29-2005, 09:42 AM

post pics.
we don't care about "updates"
we want pics.

hahaha

nismo2491 · 05-29-2005, 09:53 AM

Quote:

Originally Posted by MakotoS13

FYI: there isn't a z06 in existence with an LS1.

you, sir, are an idiot. if you have to ask this crap then you shouldn't be doin the swap.

damn you doug!!! beat me to it!

North240 · 05-29-2005, 09:59 AM

Yeah i was just going to add that as well, You might want to fugure out what motor you have first, because you either have a LS1 from a c5 corvette (or a few other cars) OR a LS6 from the z06. Before you wire it up and start making driveshafts or running computer software its probably a good choice to know what the motor is dont you think? I have an odd feeling this swap isnt going to happen.

dirty fast · 05-29-2005, 10:06 AM

Ok for the people who just don’t get it I have an ls1 zo6 vette motor. The zo6 motor I have makes 405hp opposed to the stock style ls1. The difference is the heads cam and intake manifold.

dirty fast · 05-29-2005, 10:09 AM

In my first post I asked if you guys new any quick way to tell if I have a limited slip differential in my car, not what motor I have.

North240 · 05-29-2005, 10:14 AM

Quote:

Originally Posted by dirty fast

Ok for the people who just don’t get it I have an ls1 zo6 vette motor. The zo6 motor I have makes 405hp opposed to the stock style ls1. The difference is the heads cam and intake manifold.

THEN ITS NOT A LS1 ITS A LS6 Dont be an idiot

we're trying to help. Do you have ABS in the car, if you do then you have a VLSD if not then you dont, they came paired, question answered.

justinhustle · 05-29-2005, 10:22 AM

im currently droppin a viper engine into my rollerblades

ill post pics when the swap is done

wootwoot · 05-29-2005, 10:24 AM

hahahaha, I love it!!!

drift freaq · 05-29-2005, 10:31 AM

Quote:

Originally Posted by North240

Do you have ABS in the car, if you do then you have a VLSD if not then you dont, they came paired, question answered.

No, actually they were not always paired, i.e. just because you have ABS does not mean you always have a VLSD. Seen lots of open diff. ABS cars.
back to the topic of........

dirty fast · 05-29-2005, 10:39 AM

I don’t have abs so that sucks. I can get a 91 300zx rear end would that be a good idea or should I leave it alone?

MakotoS13 · 05-29-2005, 11:27 AM

hey retard there is no such thing as an LS1 Z06 motor. there hasn't even been and never will be a Z06 with an LS1 powering it. you are a fool and a newb.

choke on sand, die, and i hope satan puts you between adolf hitler and ghandi.

Pank · 05-29-2005, 11:39 AM

Quote:

Originally Posted by dirty fast

Ok for the people who just don’t get it I have an ls1 zo6 vette motor. The zo6 motor I have makes 405hp opposed to the stock style ls1. The difference is the heads cam and intake manifold.

hahahahahahahahhahhahahahaha

"nah man, I have a rb25det, but with .1 more liters displacement and another turbo!"

I call BS on everything. even the color of his car

TheSparo · 05-29-2005, 11:39 AM

makato, he could be talking about the Z06 type R w/ the supercharged turbo in it, that is the LsOne pimp ShiZZniT, I wIsH i hAd one of tHoSE!!!!!!!111!!ONE!!!!!11!!unooneune

raen419 · 05-29-2005, 11:51 AM

this guy doesn't know what he has, if he even has it.
post pics
quit talking out of your ass.

otherwise, lock this bull shit.

*Jeff240sx* · 05-29-2005, 11:54 AM

Quote:

Originally Posted by dirty fast

So the car has 4.10 gears? If any body is planning to be in the Panama City fl. Area you can stop buy and see it.

Allright guy, the fucking 240sx has 4.086 gears. Not 4.10. Don't read 4.08 and then think 4.10. It's wrong. You asked what gears. Were told 4.08. Yet here you are. Stating 4.10. What the hell is wrong with you?

You're paying to get the wiring done? Lowballing the prices hardcore. Can't spell "tranny" correctly. BTW: What the fuck is a traney? Last night's date? Asking noob questions about something as assinine as a viscous limited slip, when all corvettes, the ones wtih the LS1 engine you've got are running are clutch type.

The LS1/LS6 differences include 1/2 a point of compression. And there are 2 versions of LS6 making different power.

Next up, the LS1 weighs 459 pounds. LS6 is 497. The tranny you list is another ~130. So, while the motor alone weighs what the KA + transmission combined weigh.. you're still an idiot that can't do math.

Go away. Really. Leave Zilvia. Play this game elsewhere. www.nicoclub.com won't give you shit for this type of idiocy.
-Jeff

Dousan_PG · 05-29-2005, 11:58 AM

^^
[claps slowly....and slowly increases speed]
[crowd goes crazy]

**ThatGuy** · 05-29-2005, 12:01 PM

You don't have to lie to try and make friends on Zilvia. However we do require you at least know what the fuck you're making up stories about. Get your facts straight before your next story. Learn the difference between a LT1, LT4, LS1, LS2, LS6, LS7, etc., before spewing more mindless bullshit here.

*edit* Damn Jeff beat me to it, with better info as well.

drift freaq · 05-29-2005, 12:05 PM

Quote:

Originally Posted by Dousan_PG

^^
[claps slowly....and slowly increases speed]
[crowd goes crazy]

ditto!!!!!!!!!!!!!!!!!!!!

*NemeGuero* · 05-29-2005, 12:07 PM

the special moment clap... god I love it

EchoOfSilence · 05-29-2005, 12:31 PM

Damn, i was hoping this guy was actually knowledgable and doing it

05-28-2005, 10:53 PM	#1
dirty fast BANNED Join Date: May 2005 Location: panama city fl Age: 36 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	zo6 ls1 in a 240sx? Hey guy I was wondering about how to tell if my car has an lsd in it buy looking at the vin or some other special feature on the car. The car is a 1996 se 240. And what gear ratio am I looking at in the rear end? I am dropping a zo6 vette motor into the car in two weeks. We did the math and the ls1 weighs 20-30 lbs. More than the stock motor and trans. I have the motor trans and every thing else. I am sure other people have done this swap. If any one has any info or pics of the ls1’s in 1995’s and up hook me up. I have some pars for sale for the 1995- and up cars so let me know. Thanks Jeffrey g

05-29-2005, 12:32 AM	#2
infinitexsound Post Whore! Join Date: Sep 2003 Location: INtraweb Age: 39 Posts: 3,522 Trader Rating: (0) Feedback Score: 0 reviews	this is getting old __________________ S14 TrackSlut coming to a raceway near you... 510 TimeAttack on its way...

05-29-2005, 12:47 AM	#3
AJ Zilvia Addict Join Date: Aug 2001 Location: Cincinnati Ohio Posts: 793 Trader Rating: (0) Feedback Score: 0 reviews	Aries <-- i think that was his nick did it. I'm quite possitive he swapped a lt1 though. Might want to get in contact with him if your serious. __________________ __________ 96 s14 300zx lsd zeal b2's

05-29-2005, 01:18 AM	#6
BlackZenkiS14 Nissanaholic! Join Date: Nov 2003 Location: "St. Chuck", MO Age: 35 Posts: 2,091 Trader Rating: (15) Feedback Score: 15 reviews	Jack the car up and spin the tires. Either way though, i dont think that rear end wont handle 405+ WHP and TQ. THew rear gears are 4.08 's and like everyone else said, if your serious, good luck, and keep us updated. __________________ -Kyle

05-29-2005, 06:17 AM	#7
TheTicTac Zilvia Junkie Join Date: May 2002 Location: CA Posts: 449 Trader Rating: (0) Feedback Score: 0 reviews	AWESOME! LS1 is the new SR20!!! __________________ GorgeousGarage L.oose S.ocks D.aisuke !

05-29-2005, 01:09 AM	#4
matlock Zilvia FREAK! Join Date: Jul 2003 Location: California Age: 36 Posts: 1,169 Trader Rating: (0) Feedback Score: 0 reviews	I think you better put a wheelie bar on the car too and a parachute that would be cool, oh yeah and a "BADASS BOWTIE" decal would also spruce it up. If you are serious good luck.

05-29-2005, 01:16 AM	#5
TheSnail Nissanaholic! Join Date: Jan 2004 Location: Marietta Georgia Age: 38 Posts: 2,434 Trader Rating: (0) Feedback Score: 0 reviews	If you got a "zo6" ls1 for your 240, I'm sure your would have seen pics of a ls1 in a 240 rather then requesting pics. I call BS until further proof.

05-29-2005, 07:51 AM	#8
MakotoS13 BANNED Join Date: Jan 2004 Location: Texas Age: 38 Posts: 4,205 Trader Rating: (0) Feedback Score: 0 reviews	FYI: there isn't a z06 in existence with an LS1. you, sir, are an idiot. if you have to ask this crap then you shouldn't be doin the swap.

05-29-2005, 08:43 AM	#10
dirty fast BANNED Join Date: May 2005 Location: panama city fl Age: 36 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Ok guys I got the motor for $2700, only because I know lots of people. I am going to be using a 700r automatic traney, and a b&m pro stick. The drive shaft we figured will cost about $150 to make. Getting the car wired will cost me $300. I plan on using edit ls1 for my computer program to fix any small check engine lights and if I plan to use turbos or nitrous. Yea I am very serious about doing this. I have seen two cars on the net that have done this swap. I figure you guys would know about more people who have done that kind of a swap. So the car has 4.10 gears? If any body is planning to be in the Panama City fl. Area you can stop buy and see it.

05-29-2005, 09:42 AM	#11
raen419 Zilvia Member Join Date: Jul 2003 Location: Jasper, AL Age: 38 Posts: 253 Trader Rating: (0) Feedback Score: 0 reviews	post pics. we don't care about "updates" we want pics. hahaha

05-29-2005, 09:59 AM	#13
North240 Zilvia Junkie Join Date: Mar 2004 Location: Portland, MAINE Age: 39 Posts: 350 Trader Rating: (0) Feedback Score: 0 reviews	Yeah i was just going to add that as well, You might want to fugure out what motor you have first, because you either have a LS1 from a c5 corvette (or a few other cars) OR a LS6 from the z06. Before you wire it up and start making driveshafts or running computer software its probably a good choice to know what the motor is dont you think? I have an odd feeling this swap isnt going to happen. __________________ ROUND 2

05-29-2005, 10:06 AM	#14
dirty fast BANNED Join Date: May 2005 Location: panama city fl Age: 36 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Ok for the people who just don’t get it I have an ls1 zo6 vette motor. The zo6 motor I have makes 405hp opposed to the stock style ls1. The difference is the heads cam and intake manifold.

05-29-2005, 10:09 AM	#15
dirty fast BANNED Join Date: May 2005 Location: panama city fl Age: 36 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	In my first post I asked if you guys new any quick way to tell if I have a limited slip differential in my car, not what motor I have.

05-29-2005, 10:22 AM	#17
justinhustle Nissanaholic! Join Date: Mar 2003 Location: ohio Age: 41 Posts: 1,693 Trader Rating: (0) Rides Gallery: justinhustle Feedback Score: 0 reviews	im currently droppin a viper engine into my rollerblades ill post pics when the swap is done

05-29-2005, 10:24 AM	#18
wootwoot Post Whore! Join Date: Jan 2004 Location: sarasota florida biatch Age: 35 Posts: 3,850 Trader Rating: (0) Feedback Score: 0 reviews	hahahaha, I love it!!! __________________ I'm from Florida so I'm probably a bit more strange than you

05-29-2005, 10:39 AM	#20
dirty fast BANNED Join Date: May 2005 Location: panama city fl Age: 36 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	I don’t have abs so that sucks. I can get a 91 300zx rear end would that be a good idea or should I leave it alone?

05-29-2005, 11:27 AM	#21
MakotoS13 BANNED Join Date: Jan 2004 Location: Texas Age: 38 Posts: 4,205 Trader Rating: (0) Feedback Score: 0 reviews	hey retard there is no such thing as an LS1 Z06 motor. there hasn't even been and never will be a Z06 with an LS1 powering it. you are a fool and a newb. choke on sand, die, and i hope satan puts you between adolf hitler and ghandi.

05-29-2005, 11:39 AM	#23
TheSparo Zilvia FREAK! Join Date: Sep 2002 Location: Athens/Chattanooga/ Cookeville/Morristown, TN Age: 36 Posts: 1,141 Trader Rating: (0) Feedback Score: 0 reviews	makato, he could be talking about the Z06 type R w/ the supercharged turbo in it, that is the LsOne pimp ShiZZniT, I wIsH i hAd one of tHoSE!!!!!!!111!!ONE!!!!!11!!unooneune __________________ 89 240 SR powered... ummm i promise its stock

05-29-2005, 11:51 AM	#24
raen419 Zilvia Member Join Date: Jul 2003 Location: Jasper, AL Age: 38 Posts: 253 Trader Rating: (0) Feedback Score: 0 reviews	this guy doesn't know what he has, if he even has it. post pics quit talking out of your ass. otherwise, lock this bull shit.

05-29-2005, 11:58 AM	#26
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 42 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	^^ [claps slowly....and slowly increases speed] [crowd goes crazy] __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

05-29-2005, 12:01 PM	#27
ThatGuy Admin Asshole Join Date: Mar 2002 Location: Retired Age: 41 Posts: 20,394 Trader Rating: (0) Rides Gallery: ThatGuy Feedback Score: 0 reviews	You don't have to lie to try and make friends on Zilvia. However we do require you at least know what the fuck you're making up stories about. Get your facts straight before your next story. Learn the difference between a LT1, LT4, LS1, LS2, LS6, LS7, etc., before spewing more mindless bullshit here. edit Damn Jeff beat me to it, with better info as well. __________________ "Speak softly,..." -Pres. Teddy Roosevelt "Be polite, be professional, ..." -Gen. James Mattis

05-29-2005, 12:07 PM	#29
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 36 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	the special moment clap... god I love it

05-29-2005, 12:31 PM	#30
EchoOfSilence Nissanaholic! Join Date: Aug 2003 Location: Los Angeles/Berkeley, CA Posts: 2,238 Trader Rating: (1) Feedback Score: 1 reviews	Damn, i was hoping this guy was actually knowledgable and doing it __________________ Petition Nissan to Make the IDx on http://IDxClub.co !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode