|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
 |
|
|
Thread Tools | Display Modes |
04-11-2003, 11:39 PM
|
#1 |
|
Clutch Pedal Slack
OK I HAVING A PROBLEM WITH MY PEDAL SINCE I HAVE CHANGE MY SLAVE CY. AND MASTER CYL. (IT WENT OUT ) I HAVE EITHER TO MUCH OR TO LITTLE SLACK IN MY PEDAL (ADJ. ON MASTER CYL. IS VERY TOUCHY (DID USE AFTER MARKET PARTS ) HAS ANYONE RAN ACROSS THIS PROBLEM OH AND THERES ABSOLUTLY NO AIR IN SYSTEM . THANKS FOR ANY COMMENTS
 |
|
|
|
| Sponsored Links |
|
04-12-2003, 02:04 PM
|
#2 |
|
Zilvia Member
 
Join Date: Jan 2003
Location: SAVANNAH, GA.
Age: 38
Posts: 155
Trader Rating: (0)
 Feedback Score: 0 reviews
|
pressure plate, low fluid, air in lines, low pressure check all, easy on the caps lock, that means you are yellin at us
__________________
fast cars are dangerous, save lives drive HONDA'S |
|
|
|
|
04-12-2003, 03:08 PM
|
#3 |
|
Zilvia Junkie
 
|
are you talking about free play in the clutch pedal. if you are just go to the pedal and there's a rod that goes from the top of the clutch pedal through the firewall. just loosen the lock nut and adjust that to spec, i can't remember what spec is but check in the fsm it will be in there. don't forget to retighten the locknut, but not too much i think the fsm says like 16ftlbs or something small like that.
Tim |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
