Blocking Stock Recirc Port - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JasonGG · 12-14-2011, 04:55 PM

So I am in the middle of installing a FMIC into my s14 with sr20. At the moment I will be running no BOV. I need to know what others have used to seal off the stock recirculation port just after the MAF on the stock intake tube. Or should I be buying an aftermarket tube?

CTblack240 · 12-14-2011, 06:53 PM

buy a aftermarket pipe, they are alot better under higher boost, rubber ones are prone to crushing under boost

JasonGG · 12-14-2011, 09:26 PM

Alright, What should I do with the line going from the boost solenoid I believe, into the intake tube? I assume the aftermarket intakes don't have any nipples on them.

12-14-2011, 04:55 PM	#1
JasonGG Leaky Injector Join Date: May 2011 Location: Canada Posts: 93 Trader Rating: (0) Feedback Score: 0 reviews	Blocking Stock Recirc Port So I am in the middle of installing a FMIC into my s14 with sr20. At the moment I will be running no BOV. I need to know what others have used to seal off the stock recirculation port just after the MAF on the stock intake tube. Or should I be buying an aftermarket tube?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-14-2011, 06:53 PM	#2
CTblack240 Zilvia Addict Join Date: Aug 2010 Location: CT Age: 30 Posts: 823 Trader Rating: (6) Feedback Score: 6 reviews	buy a aftermarket pipe, they are alot better under higher boost, rubber ones are prone to crushing under boost

12-14-2011, 09:26 PM	#3
JasonGG Leaky Injector Join Date: May 2011 Location: Canada Posts: 93 Trader Rating: (0) Feedback Score: 0 reviews	Alright, What should I do with the line going from the boost solenoid I believe, into the intake tube? I assume the aftermarket intakes don't have any nipples on them.