Clutch fan stuck - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

iBlaze240 · 04-08-2012, 07:35 PM

To start off, 1992 ka24de.
Went to do my water pump tonight and I'm having difficulty removing the clutch fan. It seems to be seized to the pulley and I don't have a good idea for removing it as of yet. Has anyone encountered this problem and had an easy solution? It would be a great help, thanks.

Mishkin_707 · 04-09-2012, 07:39 AM

After you remove the four 8mm nuts, just tap slightly with a rubber mallet, make sure you unscrew the fan off of it first, it should have six screws

rcdad123 · 04-09-2012, 11:36 AM

spray it with wd40 or pb blaster and let it soak for a few minutes. also, removing the radiator would give you more room to tap it with a hammer and prevent damage to the radiator.

iBlaze240 · 04-09-2012, 03:11 PM

There's plenty of room to wack it, but I don't want to break this water pump, just in case, and its 4 10mm nuts, that is all that holds it on. Ill soak it with some pb tonight if I can get around to it. Any more ideas would be appreciated, thanks

04-08-2012, 07:35 PM	#1
iBlaze240 Leaky Injector Join Date: Feb 2011 Location: Connecticut Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	Clutch fan stuck To start off, 1992 ka24de. Went to do my water pump tonight and I'm having difficulty removing the clutch fan. It seems to be seized to the pulley and I don't have a good idea for removing it as of yet. Has anyone encountered this problem and had an easy solution? It would be a great help, thanks. Last edited by iBlaze240; 04-08-2012 at 10:44 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-09-2012, 07:39 AM	#2
Mishkin_707 Zilvia Addict Join Date: Jul 2009 Location: everywhere Age: 39 Posts: 729 Trader Rating: (1) Feedback Score: 1 reviews	After you remove the four 8mm nuts, just tap slightly with a rubber mallet, make sure you unscrew the fan off of it first, it should have six screws

04-09-2012, 11:36 AM	#3
rcdad123 Zilvia Addict Join Date: Jul 2011 Location: san diego Posts: 639 Trader Rating: (0) Feedback Score: 0 reviews	spray it with wd40 or pb blaster and let it soak for a few minutes. also, removing the radiator would give you more room to tap it with a hammer and prevent damage to the radiator.

04-09-2012, 03:11 PM	#4
iBlaze240 Leaky Injector Join Date: Feb 2011 Location: Connecticut Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	There's plenty of room to wack it, but I don't want to break this water pump, just in case, and its 4 10mm nuts, that is all that holds it on. Ill soak it with some pb tonight if I can get around to it. Any more ideas would be appreciated, thanks