Which clutch? - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*s13 drifta* · 06-19-2012, 02:41 PM

Quote:

Originally Posted by WhiteDouki

and how am i considered a kid just because im new to the 240 scene? which is why im on here to try and figure it out

It sounds like you are new to cars all together, which means you are most likely a kid. You bought a 240sx, want to bolt on cheap parts, and make the car fast. Sorry to burst your bubble, but fast and cheap don't go together. If you want to do something right use the search button and find the answers to your questions before you buy junk.

Nicelyphe · 06-19-2012, 02:52 PM

How's that one saying go?

Cheap - Fast - Reliable

You can only choose two.

Fast + Reliable = Not Cheap
Cheap + Fast = Not Reliable

Someone correct me on that phrase if that's wrong haha.

But I did message you OP on some insight on a good clutch.

*fliprayzin240sx* · 06-19-2012, 07:31 PM

So GT35R on a stock bottom end KA?!?! I'm guessing you're running stock injectors too. If you are, well, you wont blow the turbo or the clutch first.

Rut Ro · 06-21-2012, 05:01 AM

You need to do a lot of homework before continuing on this journey. Being on a car forum, you need thick skin. Really thick skin. We are willing to help, but when questions come across as being silly, then that's where the bashing comes in.

slowjvms · 06-21-2012, 10:17 PM

I've had experience with exedy stage 2 3 puck sprung felt very nice and easy to drive should hold 250-300 NP

Also act 6 puck sprung seems be pretty decent

Allwayssideways · 06-28-2012, 01:03 PM

Get an act that's what I got and I love it I would buy a nissan throw out bearing cas the throw out bearing that came with mine squeeks

Bentleyness · 06-28-2012, 03:23 PM

how about the white bunny clutch?
rb flywheel/250z PP and disk, i plan on doing this but still seaching a local rb flywheel

Danial · 07-11-2012, 09:33 AM

Quote:

Originally Posted by Bentleyness

how about the white bunny clutch?
rb flywheel/250z PP and disk, i plan on doing this but still seaching a local rb flywheel

I second this, you can usually get these setups pretty cheap when its all said and done

240sx white bunny clutch setup : 240sx General Discussion

People say they hold like 350 crank i believe. The clamping area is increased greatly, I forget how much I measured it to be tho

BossHogg · 07-18-2012, 06:58 PM

Quote:

Originally Posted by Sileighty_85

Stop right there.... Seriously your expecting a 20 year old bone stock motor to hold up to over 300hp?

ppl will say yeah man my KA is running over 300, but it will be short lived depending on how hard they boost it. The pistons will eventually melt

EDIT: did'nt see this until now

I have what you refer to as the Outrageously expensive baller clutch : Twin Plate OS Giken, Unfortunatly they dont make one for KA's. Not really familiar with KA brand clutches. but def wont buy something cheap that rotates up to 7,000 RPM's next to my feet

you need a proven quality clutch. this is where searching come into play.

Don't know where you get info from. But you can reliably run 300 hp on a stock KA. IF things check out ok before hand (compression/leak down) AND you actually tune your shit well (no piggy back BS). It is situational. But judging by how this thread has gone, the OP will be blowing shit up left and right. Also OS Giken clutch's will fit KA24DE.......just look at their application charts.

06-19-2012, 07:31 PM	#33
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	So GT35R on a stock bottom end KA?!?! I'm guessing you're running stock injectors too. If you are, well, you wont blow the turbo or the clutch first. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-19-2012, 02:52 PM	#32
Nicelyphe Zilvia Addict Join Date: Jan 2010 Location: PA Posts: 918 Trader Rating: (16) Feedback Score: 16 reviews	How's that one saying go? Cheap - Fast - Reliable You can only choose two. Fast + Reliable = Not Cheap Cheap + Fast = Not Reliable Someone correct me on that phrase if that's wrong haha. But I did message you OP on some insight on a good clutch.

06-21-2012, 05:01 AM	#34
Rut Ro Leaky Injector Join Date: Jun 2010 Location: Colorado Age: 36 Posts: 72 Trader Rating: (0) Feedback Score: 0 reviews	You need to do a lot of homework before continuing on this journey. Being on a car forum, you need thick skin. Really thick skin. We are willing to help, but when questions come across as being silly, then that's where the bashing comes in.

06-21-2012, 10:17 PM	#35
slowjvms Zilvia Addict Join Date: May 2012 Location: West Covina, CA. Posts: 978 Trader Rating: (10) Feedback Score: 10 reviews	I've had experience with exedy stage 2 3 puck sprung felt very nice and easy to drive should hold 250-300 NP Also act 6 puck sprung seems be pretty decent

06-28-2012, 01:03 PM	#36
Allwayssideways Leaky Injector Join Date: Apr 2012 Location: Long island Age: 26 Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	Get an act that's what I got and I love it I would buy a nissan throw out bearing cas the throw out bearing that came with mine squeeks

06-28-2012, 03:23 PM	#37
Bentleyness Leaky Injector Join Date: Mar 2012 Location: chicago area Age: 33 Posts: 140 Trader Rating: (0) Feedback Score: 0 reviews	how about the white bunny clutch? rb flywheel/250z PP and disk, i plan on doing this but still seaching a local rb flywheel