MEMORIAL DAY SPECIAL (3 DAYS ONLY) NEW Suspension arms w/ FREE bushings from $149.00 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

CPARKPowertrix · 05-29-2005, 12:01 PM

MEMORIAL DAY SPECIAL (3 DAYS ONLY) NEW Competition Suspension arms from $149.00

Our special will start today Sunday May 29th and go to Tuesday May 31st.

S13/14 Competition Tension Rods----------$149.00 --------------reg. $169.00
S13 Competition Rear Camber arms---------$189.00---------------reg. $219.00
S13/14 Competition Rear Toe rods---------$169.00---------------reg. $189.00

**BONUS** All suspension arms come with a set of FREE urethane bushings or tie rod boots.

Our arms now include upgrades self contained, self lubricating Teflon ball joints that are wrapped in dust covers for longevity and protection. Yes, for those with our first generation arms, we will be offering these new upgrade ball joints with boots for purchase individually in the near future. We expect to be fully stocked with the separate ball joint components within the next month. Pricing is still pending.

We have also reduced the weight of the components by 15-18%. Compared to Japanese competitor components of the like quality (ie: Kazama, Nagiza) aluminum tension rods, which are never recommend on a street car, ours are only 0.4 lbs heavier. 0.4 pounds of additional weight is by far worth the trade off to have a much stronger component.

The rear camber arms now featured in chromolly and offer more adjustability. (Approximately up to 3 degrees of negative camber for the road and auto cross racers)

The Powertrix tension rods and front camber arms are made of heat tempered forged steel or chromolly. Aluminum products are not recommended, are not as strong, and are prone to bend and flex. These suspension components under go massive stress and entire weight transfer of the vehicle. A daily driven or street car is subjected to even more blunt or shock force due to street hazards and road conditions therefore we do not recommend the use of aluminum for these components. Our arms have been Drag and Track tested under the most rigorous scenarios at the road courses of Willow Springs, Button Willow and California Speedway Drag strip with several different adjustments and are used and trusted by many Nissan specific performance companies for their personal and race prepped vehicles.

****NEW S13/S14 POWERTRIX COMPETITION ADJ TENSION RODS $149.00 SPECIAL with FREE front tie rod boots **** IN STOCK and READY TO SHIP

****NEW POWERTRIX S13 COMPETITION ADJ REAR CAMBER ARMS $189.00 SPECIAL with FREE urethane Bushings**** IN STOCK and READY TO SHIP.

Adjust your rear camber for increased handling or tire longevity.

****NEW POWERTRIX S13/S14 COMPETITION REAR TOE CONNECTING RODS $169.00 SPECIAL with FREE urethane Bushings**** IN STOCK and READY TO SHIP.

You can also purchase your bushings separately:
ENERGY SUSPENSION BUSHINGS – AL A CARTE or FULL PACKAGE

NEW URETHANE BUSHINGS KITS FOR S13/S14

INDIVIDUAL BUSHINGS PRICING:
S13 (ONLY) front tie rod boots $10.00
S13/S14 front lower control arm bushings $29.95
S13/S14 rear arm bushings for (traction, toe rod & RUCAs) $15.00 a set
S13/S14 rear lower control arm bushings $29.95
Sub Frame Spacers $60.00

PACKAGED BUSHINGS PRICING:
S13/S14 Full kit (tie rod boots, front & rear control arm boots, and 3 sets of rear arm bushings) $99.95 shipped (ADD sub frame spacers for $55.00)

S13/S14 Sub frame Spacers $60.00

ORDERING AND PAYMENT:
Please Email me your:

1. Full Name
2. Shipping address (for shipping quote)
3. Contact Telephone Number.
4. Product you are purchasing

PAYMENT
Paypal payments:
If using a Credit card through Paypal use [email protected] (NOTE: this is our new Business Paypal account for Credit cards and Debit cards) Please add 2.9% for Paypal fees.

If transferring from Paypal to Paypal account use [email protected] (NOTE: This account will not accept Credit Card Payments.)

Or you can send a cashiers check or money order to:

POWERTRIX
Attn: Charles Park
9450 Mira Mesa Blvd # B 447
San Diego CA 92126

Please inform me if you are sending payment by mail and send it by means that are track able for your own protection. Example: any shipping company that will provide you with a tracking number or delivery confirmation.

Please feel free to contact me with any questions you may have.

brokeAs240sx · 05-29-2005, 04:23 PM

Hey Charles,
I just bought the regular ones from you a couple weeks ago (toe rods). I was wondering if I could just buy the upgraded ball joint & dust boot for it? If so, cost?

Will you sell just the ball joint & dust boot for the rear camber arms too? I got those from you a long time back, hope they are still the same threading/size?

THANKS!
Viet
hyphendesigns (AT) yahoo (DOT) com.

internetaardvark · 05-29-2005, 06:23 PM

Hi Charles, I deffinately want the new joints for everything, and don't forget I have the s14.

Let me know when you have those. And let me know when you come out with the camber arms for the s14. I'm gonna want a set of your subframe collars two, when I do end up placeing the order. Send me an email once those new parts comeout, and keep up the awesome products.

Ian · 05-29-2005, 11:20 PM

hey, charles. I have a set of second hand, original Powertrix S14 camber arms. They have the old style ball joints w/ the grease fittings. Is there any way we could work it out so i can upgrade to the new ones?

sideview_180sx · 05-30-2005, 01:34 AM

Let me know when pricing has been set for the upgraded teflon-lined bearings to replace on the RCAs

Frappe · 05-30-2005, 04:48 PM

Is it too late to get in on this via Money Order? I'd like a set of rear toe rods for S14

CPARKPowertrix · 05-31-2005, 09:10 AM

Take advantage of the LAST DAY or our MEMORIAL DAY SPECIAL. Please email me the below information for your order by today to secure your special pricing. (ENDS Wednesday June 1st 12:00am) Those that would like to mail payment, please inform/email me that you are sending it by mail and send it by means that are track able for your own protection. Example: any shipping company that will provide you with a tracking number or delivery confirmation. Send payment to:

POWERTRIX
Attn: Charles Park
9450 Mira Mesa Blvd # B 447
San Diego CA 92126

ORDERING AND PAYMENT DETAILS:
Please email me or include in the notes of your Paypal payment:

Name
Shipping address
Contact Number
Type of vehicle
Products wanted

CPARKPowertrix · 05-31-2005, 09:12 AM

Quote:

Originally Posted by Frappe

Is it too late to get in on this via Money Order? I'd like a set of rear toe rods for S14

Yes, you can still send payment by Money Order. See above post for more details. Thanks.

KOUKI KA-T · 05-31-2005, 12:18 PM

PM's you with a couple q's Charles.
-Sean

Neejay · 05-31-2005, 09:24 PM

I was all ready to pay until I read the "shipping quote" part.

So those prices are NOT shipped? Can I have a shipping quote?

s13 RUCA
Rex, Ga 30273

EDIT: If the shipping is the right price, I hope I can still get the sale price since I asked before 12:00am

KOUKI KA-T · 05-31-2005, 10:19 PM

I sent PM and e-mail, need to know shipping.....

ryan hagen · 06-01-2005, 06:17 AM

dp i need 3 or 6 pairs or set to do all my rear knuckle bushings? emailed and pm'd several times, also how much for replacemnt heim joints? i have a toe and ruca of your old silver/grey model. i d also like a aprice on traction rods. thanks
this is all what i need:

1. rear knuckle bushings all replaced
2. rear lca bushings
3. traction rods

if you could send me a price includeing shipping i can paypal you account cash.

and i need a price on replacemnt hiem joints

CPARKPowertrix · 06-01-2005, 09:30 AM

Quote:

Originally Posted by ryan hagen

dp i need 3 or 6 pairs or set to do all my rear knuckle bushings? emailed and pm'd several times, also how much for replacemnt heim joints? i have a toe and ruca of your old silver/grey model. i d also like a aprice on traction rods. thanks
this is all what i need:

1. rear knuckle bushings all replaced
2. rear lca bushings
3. traction rods

if you could send me a price includeing shipping i can paypal you account cash.

and i need a price on replacemnt hiem joints

Ryan,

My sincere apologies for taking so long on getting back to you. Here is the info that you need. You will only need 3 pairs of knuckle bushings. We do have a few sets of the old style traction rods that I can give you an excellent deal on however they will have the old style ball joints on them as well. I'll also include a set of bushings for free with the purchase of these arms so you will only have to purchase 2 more sets. Unfortunately, we do not have a replacement for the traction arms yet. We should have the new style teflon ball joints for all the arms for individual sale as soon as our next shipment comes in mid to late June. I'll have pricing on those parts at that time. Here is your pricing on the products you requested. All are in stock and ready to ship.

1. rear knuckle bushings (2 sets)---$30.00
2. rear lca bushings----------------$24.95
3. traction rods with free bushings--$85.00
Shipping(continental US)-----------$12.00
TOTAL----------------------------$151.95

brokeAs240sx · 06-01-2005, 10:28 AM

Quote:

Originally Posted by brokeAs240sx

Hey Charles,
I just bought the regular ones from you a couple weeks ago (toe rods). I was wondering if I could just buy the upgraded ball joint & dust boot for it? If so, cost?

Will you sell just the ball joint & dust boot for the rear camber arms too? I got those from you a long time back, hope they are still the same threading/size?

THANKS!
Viet
hyphendesigns (AT) yahoo (DOT) com.

Also too busy to get back to me? I've also emailed you... hoping you have an answer for me.

Thanks

Neejay · 06-01-2005, 12:24 PM

Quote:

Originally Posted by Neejay

I was all ready to pay until I read the "shipping quote" part.

So those prices are NOT shipped? Can I have a shipping quote?

s13 RUCA
Rex, Ga 30273

EDIT: If the shipping is the right price, I hope I can still get the sale price since I asked before 12:00am

Thanks....

CPARKPowertrix · 06-01-2005, 12:43 PM

Quote:

Originally Posted by brokeAs240sx

Also too busy to get back to me? I've also emailed you... hoping you have an answer for me.

Thanks

Hello,

Per the original post,...."Yes, for those with our first generation arms, we will be offering these new upgrade ball joints with boots for purchase individually in the near future. We expect to be fully stocked with the separate ball joint components within the next month. Pricing is still pending."

Yes, we should have all the new upgraded teflon ball joints for all the arms we've offered (new and first genteration) by mid to late June when our next shipment comes in. Unfortunately, we will not have exact pricing until they arrive.

I guess I need to start a contact list for everyone wanting the new ball joints. Anyone who would like to be on a contact list, Please email me at [email protected] and list the ball joints for which arms you would like. EXAMPLE:

Need new teflon ball joints for:
tension rods
toe connecting rods
rear camber arms (specify S13 or S14, single or dual arms) generation one
traction rods

We will contact you as soon as they come in. We will also post in this Group Buy forum as well.

Thanks.

CPARKPowertrix · 06-01-2005, 01:01 PM

Quote:

Originally Posted by Neejay

Thanks....

Hello, I PMed you the total. All products are in stock and ready to ship. Please let me know if you have any further questions. Thanks.

Neejay · 06-01-2005, 09:25 PM

Payment sent! Thanks man.

shogun! · 06-02-2005, 07:09 AM

Hi. I would like to buy all four link arms.
I sent you an e-mail.

richardxfeng · 06-03-2005, 06:38 PM

Group buy is still on?

breakindrifts · 06-04-2005, 12:49 AM

I want to get the Tension rods, are they still going for 149.99? Is that including shipping?
Thanks

dvdevo · 06-04-2005, 03:34 AM

yeah is it still on? i want to get some subframe spacers

ryan hagen · 06-06-2005, 06:21 AM

payment has been sent, thanks, let me know when i should expect them.
ryan

Quote:

Originally Posted by CPARKPowertrix

Ryan,

My sincere apologies for taking so long on getting back to you. Here is the info that you need. You will only need 3 pairs of knuckle bushings. We do have a few sets of the old style traction rods that I can give you an excellent deal on however they will have the old style ball joints on them as well. I'll also include a set of bushings for free with the purchase of these arms so you will only have to purchase 2 more sets. Unfortunately, we do not have a replacement for the traction arms yet. We should have the new style teflon ball joints for all the arms for individual sale as soon as our next shipment comes in mid to late June. I'll have pricing on those parts at that time. Here is your pricing on the products you requested. All are in stock and ready to ship.

1. rear knuckle bushings (2 sets)---$30.00
2. rear lca bushings----------------$24.95
3. traction rods with free bushings--$85.00
Shipping(continental US)-----------$12.00
TOTAL----------------------------$151.95

LoanShark · 06-06-2005, 04:26 PM

I emailed you about some RLCA bushings. Still waiting for the cost with shipping.

CPARKPowertrix · 06-07-2005, 04:26 PM

Quote:

Originally Posted by dvdevo

yeah is it still on? i want to get some subframe spacers

Yes, you can still get the subframe spacers $60.00 shipped. Thanks.

gonzoes14k · 06-07-2005, 05:09 PM

Prices still good ? S13/S14 rear arm bushings for (traction, toe rod & RUCAs) $15.00 a set are that for both sides or one side ?

ranisron · 06-24-2005, 06:16 AM

Charles, need a quote
S13 RUCA + rear Toe rods + bushings for RUCA/Toe arm shipped to 47408

PM or email [email protected]

Thx,

Ron

05-29-2005, 12:01 PM	#1
CPARKPowertrix Zilvia Junkie Join Date: Aug 2002 Location: San Diego CA Posts: 485 Trader Rating: (5) Feedback Score: 5 reviews	MEMORIAL DAY SPECIAL (3 DAYS ONLY) NEW Suspension arms w/ FREE bushings from $149.00 MEMORIAL DAY SPECIAL (3 DAYS ONLY) NEW Competition Suspension arms from $149.00 Our special will start today Sunday May 29th and go to Tuesday May 31st. S13/14 Competition Tension Rods----------$149.00 --------------reg. $169.00 S13 Competition Rear Camber arms---------$189.00---------------reg. $219.00 S13/14 Competition Rear Toe rods---------$169.00---------------reg. $189.00 BONUS All suspension arms come with a set of FREE urethane bushings or tie rod boots. Our arms now include upgrades self contained, self lubricating Teflon ball joints that are wrapped in dust covers for longevity and protection. Yes, for those with our first generation arms, we will be offering these new upgrade ball joints with boots for purchase individually in the near future. We expect to be fully stocked with the separate ball joint components within the next month. Pricing is still pending. We have also reduced the weight of the components by 15-18%. Compared to Japanese competitor components of the like quality (ie: Kazama, Nagiza) aluminum tension rods, which are never recommend on a street car, ours are only 0.4 lbs heavier. 0.4 pounds of additional weight is by far worth the trade off to have a much stronger component. The rear camber arms now featured in chromolly and offer more adjustability. (Approximately up to 3 degrees of negative camber for the road and auto cross racers) The Powertrix tension rods and front camber arms are made of heat tempered forged steel or chromolly. Aluminum products are not recommended, are not as strong, and are prone to bend and flex. These suspension components under go massive stress and entire weight transfer of the vehicle. A daily driven or street car is subjected to even more blunt or shock force due to street hazards and road conditions therefore we do not recommend the use of aluminum for these components. Our arms have been Drag and Track tested under the most rigorous scenarios at the road courses of Willow Springs, Button Willow and California Speedway Drag strip with several different adjustments and are used and trusted by many Nissan specific performance companies for their personal and race prepped vehicles. **NEW S13/S14 POWERTRIX COMPETITION ADJ TENSION RODS $149.00 SPECIAL with FREE front tie rod boots IN STOCK and READY TO SHIP NEW POWERTRIX S13 COMPETITION ADJ REAR CAMBER ARMS $189.00 SPECIAL with FREE urethane Bushings IN STOCK and READY TO SHIP. Adjust your rear camber for increased handling or tire longevity. NEW POWERTRIX S13/S14 COMPETITION REAR TOE CONNECTING RODS $169.00 SPECIAL with FREE urethane Bushings** IN STOCK and READY TO SHIP. You can also purchase your bushings separately: ENERGY SUSPENSION BUSHINGS – AL A CARTE or FULL PACKAGE NEW URETHANE BUSHINGS KITS FOR S13/S14 INDIVIDUAL BUSHINGS PRICING: S13 (ONLY) front tie rod boots $10.00 S13/S14 front lower control arm bushings $29.95 S13/S14 rear arm bushings for (traction, toe rod & RUCAs) $15.00 a set S13/S14 rear lower control arm bushings $29.95 Sub Frame Spacers $60.00 PACKAGED BUSHINGS PRICING: S13/S14 Full kit (tie rod boots, front & rear control arm boots, and 3 sets of rear arm bushings) $99.95 shipped (ADD sub frame spacers for $55.00) S13/S14 Sub frame Spacers $60.00 ORDERING AND PAYMENT: Please Email me your: 1. Full Name 2. Shipping address (for shipping quote) 3. Contact Telephone Number. 4. Product you are purchasing PAYMENT Paypal payments: If using a Credit card through Paypal use [email protected] (NOTE: this is our new Business Paypal account for Credit cards and Debit cards) Please add 2.9% for Paypal fees. If transferring from Paypal to Paypal account use [email protected] (NOTE: This account will not accept Credit Card Payments.) Or you can send a cashiers check or money order to: POWERTRIX Attn: Charles Park 9450 Mira Mesa Blvd # B 447 San Diego CA 92126 Please inform me if you are sending payment by mail and send it by means that are track able for your own protection. Example: any shipping company that will provide you with a tracking number or delivery confirmation. Please feel free to contact me with any questions you may have. __________________ Charles Park - www.powertrix.com - 619-944-6055 Last edited by CPARKPowertrix; 05-29-2005 at 12:17 PM..

05-29-2005, 06:23 PM	#3
internetaardvark Leaky Injector Join Date: Jan 2005 Location: Massachusetts Age: 37 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	Hi Charles, I deffinately want the new joints for everything, and don't forget I have the s14. Let me know when you have those. And let me know when you come out with the camber arms for the s14. I'm gonna want a set of your subframe collars two, when I do end up placeing the order. Send me an email once those new parts comeout, and keep up the awesome products. __________________ Everything is bullshit when your dumb

05-30-2005, 01:34 AM	#5
sideview_180sx Zilvia FREAK! Join Date: Apr 2005 Location: somewhere north of mexico Posts: 1,538 Trader Rating: (3) Feedback Score: 3 reviews	Let me know when pricing has been set for the upgraded teflon-lined bearings to replace on the RCAs __________________ feel the rythym. feel the ride. get on up. it's bobsled time. COOL RUNNINGS!!! formerly sideviewcivic Save a Horse. Drift This Cowboy. AirBag Club Member #0014

05-30-2005, 04:48 PM	#6
Frappe Zilvia Junkie Join Date: Jul 2002 Location: New York City Posts: 385 Trader Rating: (0) Feedback Score: 0 reviews	Is it too late to get in on this via Money Order? I'd like a set of rear toe rods for S14 __________________ (sold) '96 S14b Zenki4ever

05-31-2005, 09:10 AM	#7
CPARKPowertrix Zilvia Junkie Join Date: Aug 2002 Location: San Diego CA Posts: 485 Trader Rating: (5) Feedback Score: 5 reviews	Memorial Day Special (last Day) Take advantage of the LAST DAY or our MEMORIAL DAY SPECIAL. Please email me the below information for your order by today to secure your special pricing. (ENDS Wednesday June 1st 12:00am) Those that would like to mail payment, please inform/email me that you are sending it by mail and send it by means that are track able for your own protection. Example: any shipping company that will provide you with a tracking number or delivery confirmation. Send payment to: POWERTRIX Attn: Charles Park 9450 Mira Mesa Blvd # B 447 San Diego CA 92126 ORDERING AND PAYMENT DETAILS: Please email me or include in the notes of your Paypal payment: Name Shipping address Contact Number Type of vehicle Products wanted __________________ Charles Park - www.powertrix.com - 619-944-6055

05-29-2005, 04:23 PM	#2
brokeAs240sx Nissanaholic! Join Date: May 2004 Location: Southern California Posts: 1,917 Trader Rating: (40) Feedback Score: 40 reviews	Hey Charles, I just bought the regular ones from you a couple weeks ago (toe rods). I was wondering if I could just buy the upgraded ball joint & dust boot for it? If so, cost? Will you sell just the ball joint & dust boot for the rear camber arms too? I got those from you a long time back, hope they are still the same threading/size? THANKS! Viet hyphendesigns (AT) yahoo (DOT) com.

05-31-2005, 12:18 PM	#9
KOUKI KA-T Zilvia FREAK! Join Date: Feb 2003 Location: Portland, Maine Posts: 1,085 Trader Rating: (0) Feedback Score: 0 reviews	PM's you with a couple q's Charles. -Sean __________________ My car has been sold

05-31-2005, 09:24 PM	#10
Neejay Post Whore! Join Date: Jan 2004 Location: lol Age: 35 Posts: 2,586 Trader Rating: (2) Rides Gallery: Neejay Feedback Score: 2 reviews	I was all ready to pay until I read the "shipping quote" part. So those prices are NOT shipped? Can I have a shipping quote? s13 RUCA Rex, Ga 30273 EDIT: If the shipping is the right price, I hope I can still get the sale price since I asked before 12:00am Last edited by Neejay; 05-31-2005 at 10:06 PM..

05-31-2005, 10:19 PM	#11
KOUKI KA-T Zilvia FREAK! Join Date: Feb 2003 Location: Portland, Maine Posts: 1,085 Trader Rating: (0) Feedback Score: 0 reviews	I sent PM and e-mail, need to know shipping..... __________________ My car has been sold Last edited by KOUKI KA-T; 05-31-2005 at 10:37 PM..

06-01-2005, 06:17 AM	#12
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 38 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	dp i need 3 or 6 pairs or set to do all my rear knuckle bushings? emailed and pm'd several times, also how much for replacemnt heim joints? i have a toe and ruca of your old silver/grey model. i d also like a aprice on traction rods. thanks this is all what i need: 1. rear knuckle bushings all replaced 2. rear lca bushings 3. traction rods if you could send me a price includeing shipping i can paypal you account cash. and i need a price on replacemnt hiem joints __________________ 1990 hatch ka24de gt2871r

06-01-2005, 09:25 PM	#18
Neejay Post Whore! Join Date: Jan 2004 Location: lol Age: 35 Posts: 2,586 Trader Rating: (2) Rides Gallery: Neejay Feedback Score: 2 reviews	Payment sent! Thanks man.

06-02-2005, 07:09 AM	#19
shogun! Zilvia Junkie Join Date: Mar 2005 Location: Sweden Posts: 367 Trader Rating: (0) Feedback Score: 0 reviews	Want it all Hi. I would like to buy all four link arms. I sent you an e-mail. __________________ My +700hp RS13

06-03-2005, 06:38 PM	#20
richardxfeng Zilvia Addict Join Date: Jan 2003 Location: China Posts: 675 Trader Rating: (0) Feedback Score: 0 reviews	Group buy is still on?

06-04-2005, 12:49 AM	#21
breakindrifts Zilvia FREAK! Join Date: Apr 2005 Location: Agoura Hills, CA Age: 33 Posts: 1,006 Trader Rating: (0) Feedback Score: 0 reviews	I want to get the Tension rods, are they still going for 149.99? Is that including shipping? Thanks

06-04-2005, 03:34 AM	#22
dvdevo Zilvia FREAK! Join Date: Jul 2003 Location: cali Posts: 1,469 Trader Rating: (0) Feedback Score: 0 reviews	yeah is it still on? i want to get some subframe spacers

06-06-2005, 04:26 PM	#24
LoanShark Zilvia Member Join Date: Mar 2005 Location: N/A Age: 39 Posts: 182 Trader Rating: (0) Feedback Score: 0 reviews	I emailed you about some RLCA bushings. Still waiting for the cost with shipping.

06-07-2005, 05:09 PM	#26
gonzoes14k Zilvia Addict Join Date: Nov 2003 Location: Lynchburg,VA Age: 38 Posts: 626 Trader Rating: (1) Feedback Score: 1 reviews	Prices still good ? S13/S14 rear arm bushings for (traction, toe rod & RUCAs) $15.00 a set are that for both sides or one side ? __________________ "To establish the sports car, you have to race it," Zora Arkus-Duntov

06-24-2005, 06:16 AM	#27
ranisron Zilvia Addict Join Date: Aug 2003 Location: Bloomington, IN Age: 39 Posts: 766 Trader Rating: (0) Feedback Score: 0 reviews	Charles, need a quote S13 RUCA + rear Toe rods + bushings for RUCA/Toe arm shipped to 47408 PM or email [email protected] Thx, Ron __________________ U13 and S13 zilvia members are friendly

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode