My Mass Exodus! Tomei, Greddy, Exedy, Nismo - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

scottie · 10-21-2008, 09:38 AM

Holset HX35 Turbo (new) = $600 (T3 Divided, VBand Exhaust, AN fittings) *SOLD*
Greddy Turbo Timer =$70 *EDITED*
Greddy Intake Mani (custom 1/4" NPT fittings) = $500
Greddy Oil Pan = $240 SOLD
Tomei Oil Block Adapter (new) = $150
Nismo 740cc Injectors = $375 (been flow tested) SOLD
Nissan -6AN Fuel Rail = $75 SOLD
Hybrid GT Spec S13 Intercooler Kit = $400 (black 3 ply couplers w/Tbolt Clamps)
TIAL 44mm WG = $300 *SOLD*
TIAL 50mm BOV (new) = $200
EXEDY Twin Disc = $900 (new discs, new TOB, new Nismo pivot ball, new MA Motorsport needle bearing)
Aluminum Drive Shaft = $300
300ZX MAF = $80
Project Nissan Motor Mounts (new) = $100 *SOLD*
ARP Head Studs (never used) = $100
Enjuku Ex Mani Bolts (never used) = $45 *SOLD*
Nissan OEM Clutch Slave Cylinder (new) = $50
AEM Boost Controller (new) = $250 *SOLD*

GREDDY PE GT Spec Exhaust (R-A-R-E) = $550 (ceramic coated, 3.25" full exhaust as in no cat needed)

SR Custom Valve Cover = $150 SOLD
SR Chipped ECU = $150
SR Engine Harness = $200 *SOLD*
SR Starter (reman) = $50 *SOLD*
SR Trans = $200
SR Rad Hose = $25
SR Heater Hoses (new) = $40
SR CAS = $50 *SOLD*
SR TPS = $50
SR Coil Packs = $100
SR Head (no parts) = $100 *SOLD*
SR PS Pump = $75 *SOLD*
SR Ignitor = $100

Silvia Front Fenders = $200

Pictures:
HX35 Turbo (blasted cover, -3AN Pressure Fitting)

I'll throw in the Downpipe, Intake:

Motor Mounts

Tial 44mm WG

Custom 1-Piece Aluminum Driveshaft

Exedy Twin Disc

Valve Cover w/-10AN Fittings (added -10AN on side for oem crank evac)

Greddy TR EVO GT Spec (uber rare, especially now)

Misc BRMS Lines. Ill throw them in with any item.

HDI GT Spec Intercooler Kit for S13 SR20DET w/Extra Couplers.

Bings Rear Sway Bar Endlinks = $30

Tomei Oil Block Adapter

Modified OEM Fuel Rail w/-6AN Fittings

OEM Silvia Fenders

I will get more pictures up in the coming day or so. Let me know if you have any questions. Im located in Oklahoma.

Scott

khoadogg · 10-21-2008, 10:03 AM

wow, bump for an awesome turbo deal!

Jaygotboost · 10-21-2008, 10:08 AM

Yeah man someone jump on that Holset turbo I have a hx35w on my Z and that things a beast ....

radupanait · 10-21-2008, 10:17 AM

True Ive ran those turbos before on my dsm BEYOND best bang for the buck and its BRAND NEW. Looking for any trades pm me, at least to lower the price

JFoxx · 10-21-2008, 12:03 PM

interest in oil pan and sway bar end links.....where are you located?

scottie · 10-21-2008, 12:14 PM

Quote:

Originally Posted by JFoxx

interest in oil pan and sway bar end links.....where are you located?

Im located in Oklahoma.

HellaSlowAndOld · 10-21-2008, 12:48 PM

how much for the FMIC set shipped to 95621 (sacramento cali)

thanx

*brndck* · 10-21-2008, 12:53 PM

the greddy mani is for redtop or blacktop? price shipped to 92648?
and what fittings are modified and how will that affect installation?

scottie · 10-21-2008, 02:22 PM

Quote:

Originally Posted by brndck

the greddy mani is for redtop or blacktop? price shipped to 92648?
and what fittings are modified and how will that affect installation?

I will snap some photos for you. The manifold is "brushed" but not fully polished. I modded it by drilling and tapping all the vacuum sources for (1/4") NPT. NPT seals FAR GREATER by design than the metric crap that comes with the Greddy. You can either use my AN fittings and plugs I will provide with the manifold, OR you can go to any hardware store and purchase barb NPT fittings for $0.40 if you wish to use a rubber hose.

Items I will include with manifold are:
New IACV Gasket
New TB Gasket
New IACV Hose
New OEM Nissan Fuel Rail Rubber Grommets
New Thermal Intake Gasket
New -3AN Fittings and Plugs

And lets be honest. This is the real deal that now cost $600++ today. I will not take anything less than what I have posted. But with all that you are getting you cant beat it.

5t341tH · 10-21-2008, 04:06 PM

hey still got those swaybar endlinks?
would u do 30 shipped for em?

sleepinsilvia23 · 10-21-2008, 04:11 PM

When was the starter rebuilt?
Good working condition?

How much shipped to 19064? i need it ASAP

scottie · 10-21-2008, 04:59 PM

Quote:

Originally Posted by 5t341tH

hey still got those swaybar endlinks?
would u do 30 shipped for em?

$35 and they are yours. PM your information if interested.

scottie · 10-21-2008, 05:11 PM

All PM's sent.

I want to make one thing clear about this turbo. This is not some Ebay crap that may or may not be new or in good condition. This turbo was rebuilt by Turbo Technologies in Oklahoma City with a New Center Section, Seals, Coated Exhaust Housing, New -4AN Oil Inlet w/Rubber Seal, New Oil Return Gasket, Adapter and -10AN fitting. The Compressor Housing is media blasted so you can paint/coat it however you wish. Its been drilled, tapped and comes with -4AN x 1/4" NPT for a pressure source. You can use a barb fitting if you wish. I will include the SR block fittings for the oil inlet and return as well!!!

But please dont ask if I will sell it for $300 like some on Ebay.

Scott

ross.cottrill · 10-21-2008, 05:29 PM

scott!!wow man ive been following your build for a while wiating to see the results.sucks that you gotta get rid of it man!i hope all is well and glwts!!

Secretsquirrel · 10-21-2008, 05:42 PM

willing to ship the fenders?

SS

flawless · 10-21-2008, 06:25 PM

How much HP were you trying to reach with this setup?

quote=scottie;2399444]All PM's sent.

I want to make one thing clear about this turbo. This is not some Ebay crap that may or may not be new or in good condition. This turbo was rebuilt by Turbo Technologies in Oklahoma City with a New Center Section, Seals, Coated Exhaust Housing, New -4AN Oil Inlet w/Rubber Seal, New Oil Return Gasket, Adapter and -10AN fitting. The Compressor Housing is media blasted so you can paint/coat it however you wish. Its been drilled, tapped and comes with -4AN x 1/4" NPT for a pressure source. You can use a barb fitting if you wish. I will include the SR block fittings for the oil inlet and return as well!!!

But please dont ask if I will sell it for $300 like some on Ebay.

Scott[/quote]

jr_ss · 10-21-2008, 08:01 PM

Interested in the Tomei block adapter... I'll pm you...

Shawn89 · 10-21-2008, 08:04 PM

I was wondering if you still have the silvia fenders, and if so how much shipped to Columbus Ohio 43207?

mikez97 · 10-21-2008, 09:03 PM

how much for the valve cover and the head shipped to 34990
and pics of the head please

bigtiger1810 · 10-21-2008, 09:07 PM

can you sell me 1 coil pack?

scottie · 10-21-2008, 09:13 PM

Quote:

Originally Posted by ross.cottrill

scott!!wow man ive been following your build for a while wiating to see the results.sucks that you gotta get rid of it man!i hope all is well and glwts!!

Hey thanks! Don't stop watching! Just a different direction in power :-)

scottie · 10-22-2008, 01:21 PM

Quote:

Originally Posted by flawless

How much HP were you trying to reach with this setup?

Mid to Upper 400rwhp.

vodka2 · 10-22-2008, 01:22 PM

bump for clean parts.

scottie · 10-23-2008, 03:33 PM

Thanks for the orders guys! I will be shipping out stuff tomorrow. I still have several items.

About the Silvia fenders, I will try to track down a box big enough to ship them in. I tried to fit them in the box my Origin Lab doors came in but were just a little too small. I dont mind shipping, its just going to be another $80 the buyer will have to pay. I will look into it this weekend. Pictures coming soon of the other items.

Scott

scottie · 10-24-2008, 07:46 AM

Quote:

Originally Posted by HYPERION-X

Be careful with this guy, Jeff, as he screwed me. PM me for details or you can read the thread I'm starting about the situation.

His Trader rating: http://zilvia.net/f/traderratings.html?u=34313

Oh, ok. At first I thought you were talking about me! I was like "Um, I've never screwed anyone out of any parts!" In fact Im shipping stuff today!!

Here is some shots of the TIAL 50mm BOV and AEM Boost Controller, still in their boxes!!

Scott

Chrischeezer · 10-24-2008, 11:22 AM

will that drive shaft fit a HICAS (was abs) s13 chassis? SR20 swap with silvia lsd

if it will fit.. i want it.

scottie · 10-24-2008, 12:46 PM

Quote:

Originally Posted by Chrischeezer

will that drive shaft fit a HICAS (was abs) s13 chassis? SR20 swap with silvia lsd

if it will fit.. i want it.

Aw man. This drive shaft was made for a Non-ABS Non-Hicas setup.

scottie · 10-26-2008, 09:16 AM

More Stuff I keep finding:

Custom Center Console Gauge Pod = $150

The gauge pod has a metal back and cut so well you dont need anything to hold 58mm gauges in place. Painted Black to match interior black pieces. Epoxy resin, plastic, aluminum, fiberglass and a little witchcraft. I have Stewart Warner Electronic Oil Pressure and Fuel Pressure gauges w/ red led's that I will include for another $80.

OEM EuroSpec S13 Silvia Cluster = $145

OEM Nissan Clutch Master Cylinder (2000 miles) = $40
SPL SS Clutch Hose = $15

Scott

scottie · 10-26-2008, 08:44 PM

Pictures of items for sale (for those who want to see it)

OEM Clutch Slave Cylinder = $50

Greddy Turbo Timer = $65

SR Heater Hoses (new) Enjuku Racing set = $40

Nismo Shift Knob = $40

SR Ignitor = $100

SR Coil Packs = $100

SR IACV = $40

S15 Exhaust Manifold Gasket (new) = $35

SR TPS = $50

Nissan OEM Clutch Master Cylinder = $40

scottie · 10-27-2008, 01:14 PM

Radiator w/Fan and Custom Shroud = $300 *SOLD*

10-21-2008, 09:38 AM	#1
scottie Zilvia FREAK! Join Date: Nov 2003 Location: asluT Posts: 1,287 Trader Rating: (11) Feedback Score: 11 reviews	My Mass Exodus! Tomei, Greddy, Exedy, Nismo Holset HX35 Turbo (new) = $600 (T3 Divided, VBand Exhaust, AN fittings) *SOLD* Greddy Turbo Timer =$70 *EDITED* Greddy Intake Mani (custom 1/4" NPT fittings) = $500 Greddy Oil Pan = $240 SOLD Tomei Oil Block Adapter (new) = $150 Nismo 740cc Injectors = $375 (been flow tested) SOLD Nissan -6AN Fuel Rail = $75 SOLD Hybrid GT Spec S13 Intercooler Kit = $400 (black 3 ply couplers w/Tbolt Clamps) TIAL 44mm WG = $300 *SOLD* TIAL 50mm BOV (new) = $200 EXEDY Twin Disc = $900 (new discs, new TOB, new Nismo pivot ball, new MA Motorsport needle bearing) Aluminum Drive Shaft = $300 300ZX MAF = $80 Project Nissan Motor Mounts (new) = $100 *SOLD* ARP Head Studs (never used) = $100 Enjuku Ex Mani Bolts (never used) = $45 *SOLD* Nissan OEM Clutch Slave Cylinder (new) = $50 AEM Boost Controller (new) = $250 *SOLD* GREDDY PE GT Spec Exhaust (R-A-R-E) = $550 (ceramic coated, 3.25" full exhaust as in no cat needed) SR Custom Valve Cover = $150 SOLD SR Chipped ECU = $150 SR Engine Harness = $200 *SOLD* SR Starter (reman) = $50 *SOLD* SR Trans = $200 SR Rad Hose = $25 SR Heater Hoses (new) = $40 SR CAS = $50 *SOLD* SR TPS = $50 SR Coil Packs = $100 SR Head (no parts) = $100 *SOLD* SR PS Pump = $75 SOLD SR Ignitor = $100 Silvia Front Fenders = $200 Pictures: HX35 Turbo (blasted cover, -3AN Pressure Fitting) I'll throw in the Downpipe, Intake: Motor Mounts Tial 44mm WG Custom 1-Piece Aluminum Driveshaft Exedy Twin Disc Valve Cover w/-10AN Fittings (added -10AN on side for oem crank evac) Greddy TR EVO GT Spec (uber rare, especially now) Misc BRMS Lines. Ill throw them in with any item. HDI GT Spec Intercooler Kit for S13 SR20DET w/Extra Couplers. Bings Rear Sway Bar Endlinks = $30 Tomei Oil Block Adapter Modified OEM Fuel Rail w/-6AN Fittings OEM Silvia Fenders I will get more pictures up in the coming day or so. Let me know if you have any questions. Im located in Oklahoma. Scott Last edited by scottie; 10-29-2008 at 07:51 AM..

10-21-2008, 10:03 AM	#2
khoadogg Nissanaholic! Join Date: Oct 2003 Location: San Jose, CA Age: 38 Posts: 2,423 Trader Rating: (11) Feedback Score: 11 reviews	wow, bump for an awesome turbo deal! __________________ AIM SoarinStrong[B]STRONG 6iX[B] RB single turbo ///Work AMKREAD 180sx

10-21-2008, 04:06 PM	#10
5t341tH Post Whore! Join Date: Jun 2006 Location: socal (Huntington Beach) Age: 33 Posts: 2,776 Trader Rating: (14) Feedback Score: 14 reviews	hey still got those swaybar endlinks? would u do 30 shipped for em? __________________ lexus baby

10-21-2008, 05:29 PM	#14
ross.cottrill Zilvia FREAK! Join Date: Sep 2005 Location: orlando,fl Posts: 1,185 Trader Rating: (12) Feedback Score: 12 reviews	scott!!wow man ive been following your build for a while wiating to see the results.sucks that you gotta get rid of it man!i hope all is well and glwts!! __________________ " NEO VVL BABY FTMFW!" Originally Posted by shagspeed Dude if I made 500WHP on a 54C SR20DET back in 1999-2000 with old school technology .. This VET will T-BAG your RB engines

10-21-2008, 08:01 PM	#17
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,052 Trader Rating: (34) Feedback Score: 34 reviews	Interested in the Tomei block adapter... I'll pm you... __________________ My SR20VET

10-21-2008, 10:08 AM	#3
Jaygotboost Banned from the Marketplace Join Date: Sep 2008 Location: SoCal Age: 39 Posts: 221 Trader Rating: (8) Feedback Score: 8 reviews	Yeah man someone jump on that Holset turbo I have a hx35w on my Z and that things a beast ....

10-21-2008, 10:17 AM	#4
radupanait Join Date: Jun 2008 Location: troy, al Age: 34 Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	True Ive ran those turbos before on my dsm BEYOND best bang for the buck and its BRAND NEW. Looking for any trades pm me, at least to lower the price

10-21-2008, 12:03 PM	#5
JFoxx BANNED Join Date: May 2008 Location: SD & OC Posts: 722 Trader Rating: (3) Feedback Score: 3 reviews	interest in oil pan and sway bar end links.....where are you located?

10-21-2008, 12:48 PM	#7
HellaSlowAndOld Zilvia Member Join Date: Nov 2007 Location: Sacramento Age: 33 Posts: 186 Trader Rating: (7) Feedback Score: 7 reviews	how much for the FMIC set shipped to 95621 (sacramento cali) thanx

10-21-2008, 04:11 PM	#11
sleepinsilvia23 Zilvia Member Join Date: Sep 2006 Location: Philadelphia, PA Posts: 279 Trader Rating: (3) Feedback Score: 3 reviews	When was the starter rebuilt? Good working condition? How much shipped to 19064? i need it ASAP

10-21-2008, 05:11 PM	#13
scottie Zilvia FREAK! Join Date: Nov 2003 Location: asluT Posts: 1,287 Trader Rating: (11) Feedback Score: 11 reviews	All PM's sent. I want to make one thing clear about this turbo. This is not some Ebay crap that may or may not be new or in good condition. This turbo was rebuilt by Turbo Technologies in Oklahoma City with a New Center Section, Seals, Coated Exhaust Housing, New -4AN Oil Inlet w/Rubber Seal, New Oil Return Gasket, Adapter and -10AN fitting. The Compressor Housing is media blasted so you can paint/coat it however you wish. Its been drilled, tapped and comes with -4AN x 1/4" NPT for a pressure source. You can use a barb fitting if you wish. I *will include* the SR block fittings for the oil inlet and return as well!!! But please dont ask if I will sell it for $300 like some on Ebay. Scott

10-21-2008, 05:42 PM	#15
Secretsquirrel Zilvia Junkie Join Date: May 2005 Location: Mad Town Age: 33 Posts: 338 Trader Rating: (2) Rides Gallery: Secretsquirrel Feedback Score: 2 reviews	willing to ship the fenders? SS

10-21-2008, 06:25 PM	#16
flawless Zilvia Addict Join Date: May 2007 Location: San Diego, CA Posts: 699 Trader Rating: (28) Feedback Score: 28 reviews	How much HP were you trying to reach with this setup? quote=scottie;2399444]All PM's sent. I want to make one thing clear about this turbo. This is not some Ebay crap that may or may not be new or in good condition. This turbo was rebuilt by Turbo Technologies in Oklahoma City with a New Center Section, Seals, Coated Exhaust Housing, New -4AN Oil Inlet w/Rubber Seal, New Oil Return Gasket, Adapter and -10AN fitting. The Compressor Housing is media blasted so you can paint/coat it however you wish. Its been drilled, tapped and comes with -4AN x 1/4" NPT for a pressure source. You can use a barb fitting if you wish. I *will include* the SR block fittings for the oil inlet and return as well!!! But please dont ask if I will sell it for $300 like some on Ebay. Scott[/quote]

10-21-2008, 08:04 PM	#18
Shawn89 Join Date: Aug 2008 Location: columbus ohio Age: 31 Posts: 10 Trader Rating: (1) Feedback Score: 1 reviews	I was wondering if you still have the silvia fenders, and if so how much shipped to Columbus Ohio 43207?

10-21-2008, 09:03 PM	#19
mikez97 Leaky Injector Join Date: Jun 2008 Location: florida Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	how much for the valve cover and the head shipped to 34990 and pics of the head please

10-21-2008, 09:07 PM	#20
bigtiger1810 Zilvia Member Join Date: May 2006 Location: SAN FRANCISCO Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	can you sell me 1 coil pack?

10-22-2008, 01:22 PM	#23
vodka2 BANNED Join Date: Jan 2008 Location: Los angeles Posts: 1,177 Trader Rating: (18) Feedback Score: 18 reviews	bump for clean parts.

10-23-2008, 03:33 PM	#24
scottie Zilvia FREAK! Join Date: Nov 2003 Location: asluT Posts: 1,287 Trader Rating: (11) Feedback Score: 11 reviews	Thanks for the orders guys! I will be shipping out stuff tomorrow. I still have several items. About the Silvia fenders, I will try to track down a box big enough to ship them in. I tried to fit them in the box my Origin Lab doors came in but were just a little too small. I dont mind shipping, its just going to be another $80 the buyer will have to pay. I will look into it this weekend. Pictures coming soon of the other items. Scott

10-24-2008, 11:22 AM	#26
Chrischeezer Zilvia FREAK! Join Date: Jul 2005 Location: earth Age: 37 Posts: 1,406 Trader Rating: (2) Feedback Score: 2 reviews	will that drive shaft fit a HICAS (was abs) s13 chassis? SR20 swap with silvia lsd if it will fit.. i want it. __________________

10-26-2008, 09:16 AM	#28
scottie Zilvia FREAK! Join Date: Nov 2003 Location: asluT Posts: 1,287 Trader Rating: (11) Feedback Score: 11 reviews	More Stuff I keep finding: Custom Center Console Gauge Pod = $150 The gauge pod has a metal back and cut so well you dont need anything to hold 58mm gauges in place. Painted Black to match interior black pieces. Epoxy resin, plastic, aluminum, fiberglass and a little witchcraft. I have Stewart Warner Electronic Oil Pressure and Fuel Pressure gauges w/ red led's that I will include for another $80. OEM EuroSpec S13 Silvia Cluster = $145 OEM Nissan Clutch Master Cylinder (2000 miles) = $40 SPL SS Clutch Hose = $15 Scott Last edited by scottie; 10-26-2008 at 08:28 PM..

10-26-2008, 08:44 PM	#29
scottie Zilvia FREAK! Join Date: Nov 2003 Location: asluT Posts: 1,287 Trader Rating: (11) Feedback Score: 11 reviews	Pictures of items for sale (for those who want to see it) OEM Clutch Slave Cylinder = $50 Greddy Turbo Timer = $65 SR Heater Hoses (new) Enjuku Racing set = $40 Nismo Shift Knob = $40 SR Ignitor = $100 SR Coil Packs = $100 SR IACV = $40 S15 Exhaust Manifold Gasket (new) = $35 SR TPS = $50 Nissan OEM Clutch Master Cylinder = $40

10-27-2008, 01:14 PM	#30
scottie Zilvia FREAK! Join Date: Nov 2003 Location: asluT Posts: 1,287 Trader Rating: (11) Feedback Score: 11 reviews	Radiator w/Fan and Custom Shroud = $300 *SOLD* Last edited by scottie; 10-29-2008 at 07:53 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode