s14 temp guage not working - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

turbojoe · 08-25-2009, 11:31 PM

I have a 97 with the ka still, I just got it and the temp guage doesnt work. It stays at half all the time, even when the car is off. It never goes up or down. I swapped out the sensor, no luck. I also grounded the wire to the sensor and the needle went all the way up. What else can anyone suggest to do?

projectRDM · 08-26-2009, 06:57 AM

If you replaced the sender and it's still not working properly, the gauge is bad. There's only those two pieces in the circuit.

turbojoe · 08-26-2009, 12:06 PM

even tho I can make the needle move by applying ground to the wire?

projectRDM · 08-26-2009, 02:16 PM

You say the sender is good, correct? It's a new one, for the S14? There's nothing else related, it can't be wiring as you can trigger it from the sender, so it has to be the gauge unless the sender you've got is shit.

08-25-2009, 11:31 PM	#1
turbojoe Join Date: May 2009 Location: daphne, alabama Age: 35 Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	s14 temp guage not working I have a 97 with the ka still, I just got it and the temp guage doesnt work. It stays at half all the time, even when the car is off. It never goes up or down. I swapped out the sensor, no luck. I also grounded the wire to the sensor and the needle went all the way up. What else can anyone suggest to do?

08-26-2009, 06:57 AM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	If you replaced the sender and it's still not working properly, the gauge is bad. There's only those two pieces in the circuit. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

08-26-2009, 02:16 PM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You say the sender is good, correct? It's a new one, for the S14? There's nothing else related, it can't be wiring as you can trigger it from the sender, so it has to be the gauge unless the sender you've got is shit. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-26-2009, 12:06 PM	#3
turbojoe Join Date: May 2009 Location: daphne, alabama Age: 35 Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	even tho I can make the needle move by applying ground to the wire?