The search for the highest HP SR20 240's - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Red Rocket · 07-20-2012, 06:10 PM

Quote:

Originally Posted by HouseElf

can i get more info on the car that dyno'd on the home page? and was that crank or wheel horsepower?

i think it makes more than that...

My car is getting dyno'd right now... im looking for bout 500 whp... i know its not 700 hp haha but ill have dyno info in maybe a couple weeks... its getting an e85 tune. I wish it was getting done sooner but we are waiting of tuning software from apexi. They suck at customer service!!

Chl_drifter · 07-26-2012, 12:55 AM

Let's see the torque numbers on these motors

Sent from my SPH-L710 using Tapatalk 2

SomeoneWhoIsntMe · 07-26-2012, 11:05 AM

necropost

but anyway, I've always wondered about the Scorch Racing S15

Quote:

At the heart of the S15 is a very special SR. Response has been a goal throughout the development of the engine and Suzuki is very happy with what he has so far achieved. On the bottom end a Tomei 2.2L stroker kit helps boost capacity and sustain the 2.3 bar of boost that are pumped through the Hypertune intake plenum by the Blitz/KKK K27 turbocharger.

definitely a high-horsepower SR, but the 700hp peak horsepower claim seems inflated, a K27 compressor shouldn't be able to push that. still, the car is probably one of the quickest s-chassis ever built.

[email protected] · 07-26-2012, 05:01 PM

Quote:

Originally Posted by Yellow4g63

That car is running a Mazworxs SRVET setup too. I think it's 2.2 also.

never heard that

s13ontap · 11-27-2012, 06:26 PM

Fully built tomei stroker checking in!
Courteousy of mazwork, a t42 and 2000cc ID injectors I'm making just under 700hp

680wheel and spun the dyno.
Since then I blew my turbo and am stepepd down to a temporary t3/t4 hybrid. making [email protected] while I wait like everyone else on the borg/warner waiting list for a t38

s13ontap · 11-27-2012, 06:29 PM

Quote:

Originally Posted by Red Rocket

My car is getting dyno'd right now... im looking for bout 500 whp... i know its not 700 hp haha but ill have dyno info in maybe a couple weeks... its getting an e85 tune. I wish it was getting done sooner but we are waiting of tuning software from apexi. They suck at customer service!!

I have a powerfc in my car, and it was hard to tune to 700. had to sacrifice low end drivability to put up dyno queen numbers. I reccomend Injector dynamics injectors, they help the tune. PRoblem with PFC is the values for adjsuting the tune. minimum is .50 and max is 1.50 so you have to sacrifice power up high, or drivability down low. You can't make the stretch for agood tune on both ends was what I found

boosted27 · 12-10-2012, 01:56 PM

I made 572 (stock sleeves at the time) to the wheels and stopped there till I can upgrade the trans.

Precision SC6262
Peak Boost top mount manifold
Peak Boost 3" down pipe
Peak Boost 38mm dump tube
TiAL 44mm wastegate
Precision front mount intercooler
Steel braided turbo lines
TDC vacuum distribution block
AEM EMS
JGY intake
JGY fuel rail
Injector Dynamics 1000cc injectors
Aeromotive fuel press. regulator
Aeromotive 340 fuel pump
NGK spark plugs
Circut Sports grounding plate
Circut Sports catch can
Circut Sports surge tank
Circut Sports thermal intake gasket
HKS Super Sequential Blow Off Valve
AIT crank pulley
Cosworth Metal head gasket 1.5mm
7-layer metal exhaust gasket
Darton Sleeves
CP pistons 86.5mm/9.1
Manley H-Beam rods
ACL Race thrust bearing
ACL Race 19mm rod bearing
ACL Race main bearing
Mazworx main studs
Mazworx head studs
Polished Crank
ACT 6-puck sprung extreme clutch
Exedy Flywheel
Koyo radiator
Nismo thermostat
Nismo motor mounts
Nismo tranny mount
Samco radiator hoses
BC 272 cams
BC valves +1mm
BC springs and retainers
Supertech intake and exhaust valve stem seals
Supertech valve guides
HKS adj. cam gears
Circuit Sports rocer arm stoppers
Tomei solid pivit lifters
Tomei shims & guides
Slight port and polish
3 angle valve job
ISIS oil pan
ISIS pulleys
OEM timing chain set
OEM water pump
OEM oil pump

vid:

SR20DET 6262 Dyno Session 30psi - YouTube

sdrmiami · 12-13-2012, 07:43 AM

hmm i did 800whp like 3 years ago full street car.. ac and all.. [IMG]

[/IMG]

rb25_s13*CHUKI · 12-13-2012, 03:40 PM

Abels 240! Thing is a beast

Sr20vet Dyno at 29 psi pte 6766 - YouTube

JDM king240 · 12-13-2012, 05:07 PM

6-second Nissan SR20 - Outlaw 10.5 Silvia - YouTube
found this

ForeignMuscle · 12-13-2012, 05:38 PM

Sdrmiami, what is your setup head wise? 800hp on a det!? That's nuts.. What fuel was used?

sdrmiami · 12-14-2012, 06:42 AM

Quote:

Originally Posted by ForeignMuscle

Sdrmiami, what is your setup head wise? 800hp on a det!? That's nuts.. What fuel was used?

E-85

my head was done by By Dan over @ DPR.. Dan is the man, this head even had stock valves in it.. Jun valve springs, jun retainers, jun valve guides, tomei solid lifters, BC 270deg solid cams.. dan made my intake ports 170cc and my exhaust ports 95cc..(that should give you an idea) any other questions feel free to hit me up!

oh and yes 3 years ago and im the only DET with that much power.. now im doin my VET and well lets say im shooting for 300hp.. Per cyl.. lol and still a street car..

ForeignMuscle · 12-14-2012, 06:48 AM

Thanks for the info man. It's always good to see people making ridiculous power with the sr. Post some info when your new setup starts coming along.

Teigen · 02-08-2013, 05:05 PM

Sorry for bumping an old thread but I have to say there is a lot of many respectable SR20's out there!

Quite awesome to see the Mazworx making that enormous power out of the engine. But then again with a turbo that big which engone would'n? hehe JK

Trying to make a sr make 350x3 rwhp myself. sr20DE o.O

12-13-2012, 07:43 AM	#38
sdrmiami Zilvia Junkie Join Date: Nov 2008 Location: Miami Fl Age: 43 Posts: 518 Trader Rating: (10) Feedback Score: 10 reviews	hmm i did 800whp like 3 years ago full street car.. ac and all.. [IMG][/IMG] __________________ Team SDR! 305.992.1514 800hp SR20DET powered 240sx... Full street trim!

12-13-2012, 03:40 PM	#39
rb25_s13*CHUKI Post Whore! Join Date: Mar 2007 Location: Cali Age: 32 Posts: 2,759 Trader Rating: (16) Feedback Score: 16 reviews	Abels 240! Thing is a beast Sr20vet Dyno at 29 psi pte 6766 - YouTube __________________ Obliterate

02-08-2013, 05:05 PM	#44
Teigen Zilvia Junkie Join Date: Oct 2012 Location: Dark side of the moon Posts: 309 Trader Rating: (0) Feedback Score: 0 reviews	Sorry for bumping an old thread but I have to say there is a lot of many respectable SR20's out there! Quite awesome to see the Mazworx making that enormous power out of the engine. But then again with a turbo that big which engone would'n? hehe JK Trying to make a sr make 350x3 rwhp myself. sr20DE o.O __________________ Don't PM me asking for parts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-26-2012, 12:55 AM	#32
Chl_drifter Leaky Injector Join Date: Feb 2012 Location: Dallas,TX Posts: 143 Trader Rating: (1) Feedback Score: 1 reviews	Let's see the torque numbers on these motors Sent from my SPH-L710 using Tapatalk 2

11-27-2012, 06:26 PM	#35
s13ontap Join Date: Oct 2008 Location: Calgary Age: 36 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Fully built tomei stroker checking in! Courteousy of mazwork, a t42 and 2000cc ID injectors I'm making just under 700hp 680wheel and spun the dyno. Since then I blew my turbo and am stepepd down to a temporary t3/t4 hybrid. making [email protected] while I wait like everyone else on the borg/warner waiting list for a t38

12-10-2012, 01:56 PM	#37
boosted27 Join Date: Dec 2008 Location: NOLA Posts: 48 Trader Rating: (0) Feedback Score: 0 reviews	I made 572 (stock sleeves at the time) to the wheels and stopped there till I can upgrade the trans. Precision SC6262 Peak Boost top mount manifold Peak Boost 3" down pipe Peak Boost 38mm dump tube TiAL 44mm wastegate Precision front mount intercooler Steel braided turbo lines TDC vacuum distribution block AEM EMS JGY intake JGY fuel rail Injector Dynamics 1000cc injectors Aeromotive fuel press. regulator Aeromotive 340 fuel pump NGK spark plugs Circut Sports grounding plate Circut Sports catch can Circut Sports surge tank Circut Sports thermal intake gasket HKS Super Sequential Blow Off Valve AIT crank pulley Cosworth Metal head gasket 1.5mm 7-layer metal exhaust gasket Darton Sleeves CP pistons 86.5mm/9.1 Manley H-Beam rods ACL Race thrust bearing ACL Race 19mm rod bearing ACL Race main bearing Mazworx main studs Mazworx head studs Polished Crank ACT 6-puck sprung extreme clutch Exedy Flywheel Koyo radiator Nismo thermostat Nismo motor mounts Nismo tranny mount Samco radiator hoses BC 272 cams BC valves +1mm BC springs and retainers Supertech intake and exhaust valve stem seals Supertech valve guides HKS adj. cam gears Circuit Sports rocer arm stoppers Tomei solid pivit lifters Tomei shims & guides Slight port and polish 3 angle valve job ISIS oil pan ISIS pulleys OEM timing chain set OEM water pump OEM oil pump vid: SR20DET 6262 Dyno Session 30psi - YouTube

12-13-2012, 05:07 PM	#40
JDM king240 Zilvia Junkie Join Date: Jan 2011 Location: california CA Posts: 438 Trader Rating: (5) Feedback Score: 5 reviews	6-second Nissan SR20 - Outlaw 10.5 Silvia - YouTube found this

12-13-2012, 05:38 PM	#41
ForeignMuscle Zilvia Addict Join Date: Feb 2012 Location: Ya momma's house Posts: 860 Trader Rating: (16) Feedback Score: 16 reviews	Sdrmiami, what is your setup head wise? 800hp on a det!? That's nuts.. What fuel was used?

12-14-2012, 06:48 AM	#43
ForeignMuscle Zilvia Addict Join Date: Feb 2012 Location: Ya momma's house Posts: 860 Trader Rating: (16) Feedback Score: 16 reviews	Thanks for the info man. It's always good to see people making ridiculous power with the sr. Post some info when your new setup starts coming along.